作者: FHC 時間: 2015-3-28 08:24
是否有野鬆左? 定係扭唔實D縲絲?
我都係XI Sport...未試過咁 作者: kckc0127 時間: 2015-3-28 08:59
唯有拆出嚟睇睇但好大-_-#-_-#唔該師兄作者: kckc0127 時間: 2015-3-28 09:00
大工程作者: chui 時間: 2015-3-28 09:40
有冇大抄過？果兩粒bearing唔順時産生高溫，係會使牙义溜油，作者: 大孖 時間: 2015-3-28 10:03
Same thing happened to my Sakura "zero", I think this is caused by improper assemble of the differential gear, centrifugal force makes the oil leaks out during high speed of rotation .作者: hing830 時間: 2015-3-28 14:26
師兄如果拆岀來看，無膠圈有否爛，有可能導致漏油。作者: alan0108 時間: 2015-3-28 16:21
可能鑼c上得唔好 一邊高一邊低
或者可能係牙差入面塊綠色野有事 作者: kckc0127 時間: 2015-3-29 00:14
thx我準備明天拆 拆咗睇吓知唔知咩事!作者: otaku521 時間: 2015-3-29 03:17
remmember to get some heavier grease like anti-wear grease to cover the 2 shaft parts and the gasket...
Here is a guide from 3racing themselves:
http://hk.3racing.hk/articles.php?articles_key=130 作者: kckc0127 時間: 2015-3-29 22:51
thx otaku521作者: otaku521 時間: 2015-3-30 12:20
Also for your belt should be loose not tight... too tight will have some unstable effect and extra wear on the belt.
it should sag down a little when press down in the middle not stiff like on real cars
