RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: CC01 X Blackfoot Extreme [打印本頁]

作者: speedstar 時間: 2007-2-20 02:45
標題: CC01 X Blackfoot Extreme
車殼有待完成, 仲要改殼柱位

[ 本帖最後由 speedstar 於 2007-2-20 14:59 編輯 ]

作者: eason 時間: 2007-2-20 02:53
wawawa....... GPM metal rims .....

........

with F350 tyres ??.......

作者: speedstar 時間: 2007-2-20 10:48

原帖由 eason 於 2007-2-20 02:53 發表
wawawa....... GPM metal rims ..... ........

with F350 tyres ??.......

Hummer tyres, no side white lettering

Installed with vintage Sanwa 3ch RC. Hope I can use 1ch to control light on/off.

有冇玩過cc01既解答一下:

1. 尾避震機彈弓托底部會掂到橫shaft外殼ge? 我會唔會砌錯左?
2. 一般玩使唔使鎖尾牙差速?
3. 頭單有冇大作用? 但我己裝了, "Cross-Country 4WD Torque Splitter Unit"

THX

作者: iketani 時間: 2007-2-20 11:00
想問下CC01本身係唔係用細D既車軨架??

呢架野都好好玩下睇落

正

作者: J 時間: 2007-2-20 11:35

原帖由 speedstar 於 2007-2-20 10:48 發表

Hummer tyres, no side white lettering
Installed with vintage Sanwa 3ch RC. Hope I can use 1ch to control light on/off.

有冇玩過cc01既解答一下:

1. 尾避震機彈弓托底部會掂到橫shaft外 ...

wow, nice looking truck!

1. Same appears on my two CC-01, i think it's normal?
2. I came across many situations that needs a locked diff. (which I haven't done) So if u r gonna enjoy real offroad fun, lock it!
3. My torque splitter is still NIP so i can't comment sorry brother.

hope these help!

作者: speedstar 時間: 2007-2-20 12:53

原帖由 J 於 2007-2-20 11:35 發表

wow, nice looking truck!

1. Same appears on my two CC-01, i think it's normal?
2. I came across many situations that needs a locked diff. (which I haven't done) So if u r gonna enjoy real o ...

Thx J, understood la....

原帖由 iketani 於 2007-2-20 11:00 發表
想問下CC01本身係唔係用細D既車軨架??

唔係, 用番標準1/10 touring軨, 只係呔身較高!

作者: bcgg 時間: 2007-2-21 16:44
This is COOL!
Waiting for your finishing

作者: li5115 時間: 2007-2-22 05:06

原帖由 speedstar 於 2007-2-20 10:48 發表

Hummer tyres, no side white lettering
Installed with vintage Sanwa 3ch RC. Hope I can use 1ch to control light on/off.

有冇玩過cc01既解答一下:

1. 尾避震機彈弓托底部會掂到橫shaft外 ...

1. 可在避震尾加一膠介指 (約2.5~3mm高) 剛好臧在彈弓托底內，我用緊。

作者: 毒魚 時間: 2007-2-22 14:28
隻殼如何弄到手的!!!!

作者: speedstar 時間: 2007-2-22 21:10

原帖由毒魚於 2007-2-22 14:28 發表
隻殼如何弄到手的!!!!

The Blackfoot Xtreme kit is selling at $6xx at KWS.

作者: minimini 時間: 2007-2-22 23:13

原帖由 speedstar 於 2007-2-22 21:10 發表

The Blackfoot Xtreme kit is selling at $6xx at KWS.

but then the chassis will be wasted wor......

作者: lespaul 時間: 2007-2-22 23:25

原帖由 minimini 於 2007-2-22 23:13 發表

but then the chassis will be wasted wor......

Buy a F-350 to use the shell to run that chassis!!

作者: speedstar 時間: 2007-2-23 00:05

原帖由 minimini 於 2007-2-22 23:13 發表

but then the chassis will be wasted wor......

You can put a 190/200mm body on it, not bad to play with.

For me, I got another F-150(TA02) kit (recently re-appear in KWS at $6xx).

So:

CC01 chasis ----- Blackfoot Extreme ABS plastic body
Blackfoot Extreme chasis ---- Ford F-150 Lexan body
TA02 chasis ----- R32 Calsonic lexan body (also now available in KWS)

[ 本帖最後由 speedstar 於 2007-2-23 00:09 編輯 ]

作者: speedstar 時間: 2007-2-23 00:06

原帖由 li5115 於 2007-2-22 05:06 發表

1. 可在避震尾加一膠介指 (約2.5~3mm高) 剛好臧在彈弓托底內，我用緊。

Thanks for the tips....now try to find such 2.5~3mm高膠介指.

作者: li5115 時間: 2007-2-27 14:46

原帖由 speedstar 於 2007-2-23 00:06 發表

Thanks for the tips....now try to find such 2.5~3mm高膠介指.

Which is came from the Tamiya spare parts, No.SP.950 or 50950, cost around HK$30.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)