455.jpg (20.06 KB, 下載次數: 14)
2014-8-10 00:31 上傳
作者: fy789 時間: 2014-8-10 04:49
本帖最後由 fy789 於 2014-8-10 09:57 編輯
C-HIng:
There are 14 screws and their positions are shown above.
My pic is as reference only and Do this at YOUR OWN RISK!
作者: taiming2 時間: 2014-8-10 09:53
本帖最後由 taiming2 於 2014-8-10 10:05 編輯
fy789 發表於 2014-8-10 04:49
C-HIng:
There are 14 screws and their positions ar shown above.
唔該晒 fy789師兄
作者: lykm2003 時間: 2014-8-10 18:31
All C hing,
I have the same problem to open the boat body. My Southampton is 2.4G one and cannot release the body even those 14nos. screw off. Is there any sequence to release the body?.
作者: lojasonkachun 時間: 2014-8-17 09:15
船款都幾靚喎。搞到我心思思⋯⋯
作者: fy789 時間: 2014-8-17 11:32
lykm2003 發表於 2014-8-10 18:31
All C hing,
I have the same problem to open the boat body. My Southampton is 2.4G one and cannot re ...
1. After you take out the 14 screws, remove the 2 deck opening
covers (one under the superstructure, and the other is near
the tail.).
2. One hand hold on the hull, and insert the fingers
of the other hand to pull on the deck openings in opposite
direction using some force. The deck ad the hull will be separated.
The first time to take out the deck is difficult due to the water-proof
thin foam tapes on the interface of the hull and the deck.
Hope this helps!
作者: lykm2003 時間: 2014-8-29 13:34
Thanks C Hing, will tried in this weekend
作者: glen6831 時間: 2015-1-24 19:46
恭喜 Ching
我都入了這船，在計劃升級外觀中
作者: Annie268 時間: 2015-1-24 20:26
努力努力！
作者: fy789 時間: 2015-1-25 05:46
HobbyEngine Southampton is an excellent entry-level boat for all Chings !
作者: hkboy1668 時間: 2015-1-25 15:08
fy789 發表於 2015-1-25 05:46
HobbyEngine Southampton is an excellent entry-level boat for all Chings ! :lovel ...
呢架野都唔平wor. 差唔多要成$260usd一架.
作者: fy789 時間: 2015-1-25 15:44
本帖最後由 fy789 於 2015-1-26 12:41 編輯
hkboy1668 發表於 2015-1-25 15:08
呢架野都唔平wor. 差唔多要成$260usd一架.
http://www.squadron.com/1-36-Hobby-Engine-Southampton-Tug-Boat-p/rhe0701.htm
USD225 + FREE shipping
Squadron is located in Texas, so no sales tax to California
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |