RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Lunchbox 斷車腰彈弓 [打印本頁]

作者: GigaRacer 時間: 2007-1-23 08:26
標題: Lunchbox 斷車腰彈弓
As you know, that's Lunchbox's weakest link: 斷車腰彈弓

That was broken long time ago (after 2-3 runs). Yesterday, I used hot melt glue to glue that area, so the gear box can't 彈, and the 腰 can't twist.....

Result: the car very easy to flip over when you turn. More importantly, the Co27 motor made the car flip by the head going up too much

作者: rc2006 時間: 2007-1-23 09:47
There was a modification to insert the third (oil) damper in the middle the rear axis and that should make the spring un-necessary.

作者: donhk1982 時間: 2007-1-23 18:11
我都斷左....自己DIY彈弓啦..

作者: smallfaifai 時間: 2007-1-23 21:08
我都加左第三條避震(相中係普通彈弓，試車後改成一條1/10touring的膠油壓)，俾幾張相大家參考下：

[ 本帖最後由 smallfaifai 於 2007-1-23 21:10 編輯 ]

作者: courel500 時間: 2007-1-24 00:31

原帖由 smallfaifai 於 2007-1-23 21:08 發表
我都加左第三條避震(相中係普通彈弓，試車後改成一條1/10touring的膠油壓)，俾幾張相大家參考下：

咁加唔係唔好 , 但你最好頭尾加返個波頭好D , 因為你而家只係有吸震效果 , 但扭腰既話可能支油壓會"橋"住 !

>>> http://bbs.rc-evo.com/viewthread.php?tid=21412&highlight= 我之前架 LB

[ 本帖最後由 courel500 於 2007-1-24 00:34 編輯 ]

作者: GigaRacer 時間: 2007-1-24 00:50
I thought about that, and also saw another brother has 4 避震 at the back. Will try try. Thanks!

作者: smallfaifai 時間: 2007-1-24 02:31

原帖由 courel500 於 2007-1-24 00:31 發表

咁布飢A而家只係有吸震效果 , 但扭腰既話可能支油壓會"橋"住 !

>>> http://bbs.rc-evo.com/viewthread.php?tid=21412&highlight= 我之前架 LB

我上次玩架車又唔係好覺……不過我都打算轉返波頭，事關上次玩車前匆匆忙忙整，手頭有乜就整左上去算數，o黎緊有時間會搞下……同埋我到而家都仲係用緊原裝4條彈弓冇換油壓，貪佢行車冇咁順得意好多……

o黎緊玩WildWilly就會玩油壓啦……

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)