RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 聽講星星"馴馬師-Rough Rider"會出復刻版 [打印本頁]

作者: fyin 時間: 2006-12-30 23:16
標題: 聽講星星"馴馬師-Rough Rider"會出復刻版
好消息!!!!!
聽講星星"馴馬師-Rough Rider"會出復刻版, 真係好消息, 唔知要等幾內哩??

跟住就係HotShot 同.................

從一個台灣絕版車綱撮過來的:

(曾經跟TAMIYA內部人員提過台灣的遙控古董車收集市場等諸多情形,他們覺得價格高得不可思議, 因為他們說TAMIYA的創業精神就是要實現兒時夢想,推出這些復刻模型無非也是如此,所以我樂見其成喔.....

登錄/註冊後可看大圖

)

http://www93.sakura.ne.jp/~time-tunnel/06-11-19-1.html

作者: calvinpun2000 時間: 2006-12-30 23:19

原帖由 fyin 於 2006-12-30 23:16 發表
好消息!!!!!
聽講星星"馴馬師-Rough Rider"會出復刻版, 真係好消息, 唔知要等幾內哩??
跟住就係HotShot 同.................

從一個台灣絕版車綱撮過來的:

(曾經跟TAMIYA內部人員提過台 ...

如果番出,車低一樣~~~maybe buy~~~
吾好用frog 低用馴馬師殼

作者: aattaa 時間: 2006-12-30 23:43

原帖由 calvinpun2000 於 2006-12-30 23:19 發表

如果番出,車低一樣~~~maybe buy~~~
吾好用frog 低用馴馬師殼

如果吾係復刻車架就大獲,舊Rough Rider會步 4X4 Pick up, Blazing Blazer後塵,更加炒到天價.

作者: txzmxn 時間: 2006-12-31 11:32
如果係真咁即係 Sand Scorcher, Ford F150 Ranger 都有機會 re-release 啦! 同一個底 
我就想佢出Sand Scorcher多啲喇 
希望佢唔會出啲古古怪怪, 混種復刻車啦~

作者: beat 時間: 2006-12-31 12:18
標題: 回復 #1 fyin 的帖子
where did you know this news from? i am sure tamiya will not re-release for the rough rider man

作者: fyin 時間: 2006-12-31 18:48
Hi Beat,
This news from a Taiwan Vintage website, pls enter the link as above.
It have a japanese describtion about that.
Thanks!

作者: beat 時間: 2007-1-1 10:35
標題: 回復 #5 beat 的帖子
icc but i read it, its say it maybe will re-release the rough rider thats mean its not 100% for srue bor francis are you mean for this jap sentense?
トークショーのテーブルに置かれていたバギーチャンプ。これ再版してください…
actually this sentence mean talk show table are have a rough rider please re-release again, so that not mean it will rel-release for 100% bor.....

please see it again

thanks

作者: txzmxn 時間: 2007-1-1 12:01

原帖由 beat 於 2007-1-1 10:35 AM 發表 
icc but i read it, its say it maybe will re-release the rough rider thats mean its not 100% for srue bor francis are you mean for this jap sentense? 
トークショ&#12540 ...

上面嗰句日文用網上翻譯器翻譯咗係咁解:

"被toque show的桌子放置的baggy冠軍。能來請再版…"

應該不能確定是 re-release

作者: fat_fat_cat 時間: 2008-2-17 00:23
A little bit late see these mail.

I had heard that the metal mould for the rough rider is not belongs to Tamiya, so that cannot re-issue

I only see a rough rider like QD in japan last july.

Steven

作者: Jimmyso 時間: 2008-2-17 00:29

原帖由 fyin 於 2006-12-30 23:16 發表

 登錄/註冊後可看大圖

好消息!!!!!
聽講星星"馴馬師-Rough Rider"會出復刻版, 真係好消息, 唔知要等幾內哩??
跟住就係HotShot 同.................

從一個台灣絕版車綱撮過來的:

(曾經跟TAMIYA內部人員提過台灣的遙控古董 ...

Yes,I had heard the same News in Headquarter too !!!

作者: 藍毛毛 時間: 2008-2-17 00:34
標題: 回復 1# 的帖子
如馴馬師出復刻最好出埋另一甲虫殼就完美。

作者: fat_fat_cat 時間: 2008-2-17 00:37
They are not 復刻, but a QD with a rough rider like shell only.... too sad seen they won't re-issue it again.

作者: tiger1 時間: 2008-2-17 00:58
ho ah

would love to get one for water fight!!

Don't give me a plastic chassis with the old shell.

作者: fat_fat_cat 時間: 2008-2-17 01:03
Tamiya 56707
look fully plastic and still think it is a quickdrive, but most call it tamtech too.[attach]143683[/attach]

作者: chacha 時間: 2008-2-17 03:16
熱烈期待馴馬師出復刻

作者: Edde 時間: 2008-2-17 03:45
睇到呢個 post .... 真開心, 馴馬師出復刻.

作者: billychan 時間: 2008-2-20 11:54
可惜唔係原版復刻!

作者: python 時間: 2008-2-20 13:35
Any new update about what chassis will be? really use frog's chassis plus 馴馬師 body?

作者: fat_fat_cat 時間: 2008-2-21 16:34
FYI
http://www.tamiya.com/english/products/56707buggy_champ/index.htm

same as frog, hornet and fox.....

作者: chacha 時間: 2008-2-21 17:07

會唔會係復刻1/10馴馬師呀，fat_fat_cat 兄提供0個幾部都出0左大半年

作者: fat_fat_cat 時間: 2008-2-21 17:34
I don't know, but seen tamiya never re-issue metal main parts r/c car before, and heard before that the metal mould is not belong to them, don't know, sure I want they can re-issue, but re-issue the old design will be the best. plus sorry, the time past too fast, see that qd rough rider as 'new release' when in japan, but last july.....

作者: speedstar 時間: 2008-2-21 23:36

原帖由 fat_fat_cat 於 2008-2-21 17:34 發表

 登錄/註冊後可看大圖

I don't know, but seen tamiya never re-issue metal main parts r/c car before, and heard before that the metal mould is not belong to them, don't know, sure I want they can re-issue, but re-issue the o ...

There is one...the XR311 with metal chasis. It is over $1000 and I believe the sale was not very good. I had seen it on the shelves in the RC shops for years, before they were finally sold out.

作者: fat_fat_cat 時間: 2008-2-21 23:59
but xr311 only made of bended metal sheet, are the process same as injection mould? don't know, just think if these is ok, rough rider and hi-lux should not same as XR311, mostly will heat.

作者: tiger1 時間: 2008-2-22 08:16
XR311 metal parts are mostly stamped aluminium, which is rather easy to do.

Rough rider and SRBs are made of mostly cast magnesium low fusing (temperature) alloy. his involve the manufacturing of molds and casting, finishing and making those screw holes. A few more little steps.

作者: BUNNYYUEN 時間: 2008-3-2 21:18
依家馴馬師出面話梗天價即糸幾多錢？

作者: fyin 時間: 2008-3-2 21:24
Hi Bro,
過萬銀, 淨係個全新殼(body set)就已經買5~6仟港元.

作者: BUNNYYUEN 時間: 2008-3-2 22:40
嘩咁我咪發達,馴馬師殼連合我有,FORD殼我都有,仲要連盒未砌,邊個要,開個價黎聽聽

作者: BUNNYYUEN 時間: 2008-3-2 22:44
馴馬師原裝泵把值幾錢？

作者: Sps 時間: 2008-3-2 23:57

原帖由 BUNNYYUEN 於 2008-3-2 22:44 發表

 登錄/註冊後可看大圖

馴馬師原裝泵把值幾錢？

black or grey ?

作者: Sin 時間: 2008-3-3 00:03

原帖由 BUNNYYUEN 於 2008-3-2 22:40 發表

 登錄/註冊後可看大圖

嘩咁我咪發達,馴馬師殼連合我有,FORD殼我都有,仲要連盒未砌,邊個要,開個價黎聽聽

NIB body set around HKD$5000+

作者: peter7 時間: 2008-3-3 00:06
In Japan Rough Rider(馴馬師) body set worth around 30000yen=HK$2500
Sand Scorcher around 60000yen=HK$4800

[ 本帖最後由 peter7 於 2008-3-3 00:09 編輯 ]

作者: Sps 時間: 2008-3-3 00:22

原帖由 peter7 於 2008-3-3 00:06 發表

 登錄/註冊後可看大圖

In Japan Rough Rider(馴馬師) body set worth around 30000yen=HK$2500
Sand Scorcher around 60000yen=HK$4800

how about shipping cost ?

作者: peter7 時間: 2008-3-3 00:25

原帖由 Sps 於 2008-3-3 00:22 發表

 登錄/註冊後可看大圖

how about shipping cost ?

the body set is not heavy. shipping around 2500yen

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)