標題: 有冇師兄有我依個問題...可以教我點解決嗎?? [打印本頁] 作者: royroy2000 時間: 2013-1-25 11:47 標題: 有冇師兄有我依個問題...可以教我點解決嗎?? 我架FORD拖頭換左隻冇刷摩打之後......問題就出現...轉向servo就出現不停跳動......我個人認為係出現干擾....唔知各位師兄有冇解決方法(除左換過摩打同servo)....多謝各位幫忙作者: Salviour94 時間: 2013-1-25 12:05
可以提供更多資料嘛 咩servo 電變摩打作者: royroy2000 時間: 2013-1-25 12:25
hobby wing ezrun 35a & ezrun 13t 3000kv...futaba s3003......作者: hungbobby 時間: 2013-1-25 14:11
I don't have your issue, mine is HW 60A WP ESC, EZRUN 13.5T and 3003. I suggest to add a capacitor (10V, 3300uF) to a free channel on the receiver to have a try. This method usually solve similar issue for metal gear servos which draws more power from the receiver.作者: royroy2000 時間: 2013-1-25 15:00
thx. hungbobby 師兄....可以告訢我如何接駁10V,3300UF.....我對電子唔係好認識?.....thx. again.
