The averaged experienced modeler should be able to assemble the Tiger 1 kit in about 100 hours. Like the King Tiger some modelers have built the kit in much less time but most spend extra time adding many of the fine details found on tanks during combat. Expect to spend an additional 25 hours to paint the kit. Only basic hand tools are required to assemble the tank. Items such as paint, batteries, battery charger, radio equipment (4 channel ), and speed controllers are not included with the kit.
作者: zeda 時間: 2012-9-25 21:14
You can use a stick 4-channel remote control but not 4PL作者: rc-driver 時間: 2012-9-25 23:39
又唔可以視所有強國貨都係差既, 人係識進步. 產品一樣會改善.
就好似國內一家做 1/6 全金屬都做得出名, 香港都有幾位師兄有.
至於買返來係咪仲有排攪我反而覺得要睇玩既人多過架車本身質數...作者: Andrew168 時間: 2012-9-27 10:20
玩坦克樂趣在於多野搞 DIY作者: lozter5228 時間: 2012-9-27 20:57
其實睇自己既要求... 有人買返離落地就玩 ,有人鐘意改疑真改金屬件 ... 有人要求高操縱細節..作者: pokpok 時間: 2013-3-13 04:47
I have a king tiger from RCarmory. The tank is good. If you don't mind that ir is made of special PVC material called Sentra. The King tiger details are very good. I know that the designer measured all the parts at Patton Museum in Kentucky. I went there once with my wife. I wanted to measure the dimensions of the king tiger tank, but my wife did not want to stay at all.
