@Aeroace: The 3D printed parts of the chassis (suspension arms, suspension blocks, rocker arms, etc) are not yet strong enough to handle the impacts of landing jumps, hence why I didn't jump the car ;-) I really can't wait to do that as well though, I'm trying to prepare it to enter actual races, not just a shakedown like this.
Origineelreclamebord 4 小時以前作者: jerwin123 時間: 2012-8-12 23:45
黃色件只係用printer印出黎做測試, 唔夠強度跳作者: gimsink 時間: 2012-8-14 10:17
八十年代开始玩车的朋友们, 有好多都DIY頭驅 buggy, 好有型架, 十足十一隻大青蛙, 仲有赛事...我都有整過, 不過整到不倫不類, 似隻死狗扒地, 最后放棄, 睇番上面七樓張圖, 往事又再湧现, 往矣......作者: slowerthanyou 時間: 2012-8-14 13:23 another ff buggy
