RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 警察閃燈 [打印本頁]

作者: 觀星是答案    時間: 2006-11-1 13:01
標題: 警察閃燈
500 老師, for your reference ~
這是設計概念圖

作者: soilderman83    時間: 2006-11-1 14:33
Could you help me to make one set ?
作者: Mobility(雲)    時間: 2006-11-1 14:34
原帖由 soilderman83 於 2006-11-1 02:33 PM 發表
Could you help me to make one set ?


$$$$$$$$$$$$$$$$$$$$$$$$$$
作者: courel500    時間: 2006-11-1 15:23
好貴呀 ! 1 日人工錢 !
作者: 觀星是答案    時間: 2006-11-1 16:26
原帖由 soilderman83 於 2006-11-1 14:33 發表
Could you help me to make one set ?

我遲 o的俾個 list 你, 你去執齊 o的零件 ok ?
因為上面張圖無 show 晒 o的零件出來, 只係 show 了主要的 IC 而已
作者: soilderman83    時間: 2006-11-1 23:51
原帖由 觀星是答案 於 2006-11-1 16:26 發表

我遲 o的俾個 list 你, 你去執齊 o的零件 ok ?
因為上面張圖無 show 晒 o的零件出來, 只係 show 了主要的 IC 而已

Thanks!If you give me the list,I think I canl do it myself!
作者: gibson    時間: 2006-11-1 23:59
原帖由 courel500 於 2006-11-1 15:23 發表
好貴呀 ! 1 日人工錢 !



Please put my name on your wait list, I want a set please.........

If you don't mine, Bro star watch, you can give me the list, I can buy the materials and parts for you... for sure...
作者: 觀星是答案    時間: 2006-11-2 00:08
如果多人要, 我就畫 PCB 開料造底板, 唔用威化餅 PCB 了
作者: minimini    時間: 2006-11-2 00:08
原帖由 gibson 於 2006-11-1 23:59 發表



Please put my name on your wait list, I want a set please.........

If you don't mine, Bro star watch, you can give me the list, I can buy the materials and parts for you... for sure...:vic ...


I want one set too.....預埋我一份.....Thx !!.........
作者: soilderman83    時間: 2006-11-2 00:10
But I buy a find engine toys a few days ago with police sound and lights Do you know how to diy a police sound?
作者: 觀星是答案    時間: 2006-11-2 01:03
原帖由 soilderman83 於 2006-11-2 00:10 發表
But I buy a find engine toys a few days ago with police sound and lights Do you know how to diy a police sound?

police sound ... bee bu bee bu ?
haha, 唔難整, 不過要夠大聲先係問題
作者: 觀星是答案    時間: 2006-11-2 01:17
實驗成功 ~
左邊快閃 3 下, 右邊快閃 3 下, 再跳返左邊 ...
用埋可變電阻就可以 set 個閃動頻率同切換速度啦 !

去片 !!
http://apple4u.no-ip.com/000.mpg

試驗用的 Bread Board .... 都幾多零件
有好多都係用唔晒佢地的 functions

作者: gibson    時間: 2006-11-2 02:00
原帖由 觀星是答案 於 2006-11-2 01:17 發表
實驗成功 ~
左邊快閃 3 下, 右邊快閃 3 下, 再跳返左邊 ...
用埋可變電阻就可以 set 個閃動頻率同切換速度啦 !

去片 !!
http://apple4u.no-ip.com/000.mpg

試驗用的 Bread Board .... 都幾多零件 ...





congrats, if the test is fruitness, pm me the list and I can go to buy the materials asap.... or please extend you little universe to fully utilize the sources........awaiting your result!!!!!
作者: 觀星是答案    時間: 2006-11-2 07:27
原帖由 gibson 於 2006-11-2 02:00 發表





congrats, if the test is fruitness, pm me the list and I can go to buy the materials asap.... or please extend you little universe to fully utilize the sources........awaiting your res ...

測試過之後, 有部份地方需要修改 ~ 我想要星期六先可以 list 到個 part list ~
作者: soilderman83    時間: 2006-11-2 22:40
waiting for you
作者: minimini    時間: 2006-11-3 00:31
Thx !!........ waiting for your test results......  
作者: jackychau    時間: 2006-11-3 10:26
我都想要個parts list 同埋線路圖啊~~~

Thanks x 1000000000
作者: 觀星是答案    時間: 2006-11-3 10:56
原帖由 skywork 於 2006-11-3 10:41 發表
其實買個單車尾燈改咪得啦, just $10-

呢 o的好難做到似十足吧 ~
作者: soilderman83    時間: 2006-11-4 13:02
原帖由 skywork 於 2006-11-3 10:41 發表
其實買個單車尾燈改咪得啦, just $10-

Wo!It's seem a good idea wo!
作者: soilderman83    時間: 2006-11-4 13:03
原帖由 jackychau 於 2006-11-3 10:26 發表
我都想要個parts list 同埋線路圖啊~~~

Thanks x 1000000000

Me too,wait for your reply,thanks!
作者: gibson    時間: 2006-11-4 13:12
原帖由 觀星是答案 於 2006-11-2 07:27 發表

測試過之後, 有部份地方需要修改 ~ 我想要星期六先可以 list 到個 part list ~



No problem take your time........ relax     but......
作者: 觀星是答案    時間: 2006-11-4 17:58
原帖由 gibson 於 2006-11-4 13:12 發表



No problem take your time........ relax     but......

part list 已在我心中
作者: simonwang002    時間: 2006-11-4 21:56
掂呀!佩服!
作者: 觀星是答案    時間: 2006-11-5 10:42
尋日有個朋友打電話俾我
問我要唔要 IC Programmer, 但個 Programmer 要成 $500, 唔知要唔要好

如果有個 Programmer, 就可以將 3 粒 14 腳 IC, 改用一粒 24 腳 CPU 代替
而且粒 CPU 係 Program-able , 以後想改 o的燈 o既閃法, 只要拆粒 CPU 出來
寫個新 program 入去即可, 唔需要次次砌 circuit

但係呢 .... 除 o左整下車燈, 我又想不到個 Programmer 有咩用
作者: 觀星是答案    時間: 2006-11-5 12:06
Part list for 警察閃燈 LM-556 / NE-556 set
線路圖要返公司先 scan 上來

IC
LM556 或 NE556 (Dual Timer) * 1
74LS04 (Not Gate / Inverter) * 1
74LS08 (AND Gate) * 1

Resistor
100 Ohm * 3
120 Ohm * 2
1k Ohm * 2
240k Ohm * 1
500k Ohm * 1

Cap
10nF * 2
1uF * 2
作者: jackychau    時間: 2006-11-5 22:16
原帖由 skywork 於 2006-11-3 10:41 發表
其實買個單車尾燈改咪得啦, just $10-


其實我想一有一腳自己做, 多d 成功感麻

但係又唔想買個IC Programmer, 因為自己又唔會成日整....
所以如果就咁買d 現成的IC 可以做到就最好la~~
作者: 中遠    時間: 2006-11-5 22:27
好野,今都整到。。。
作者: 觀星是答案    時間: 2006-11-6 00:23
原帖由 jackychau 於 2006-11-5 22:16 發表


其實我想一有一腳自己做, 多d 成功感麻

但係又唔想買個IC Programmer, 因為自己又唔會成日整....
所以如果就咁買d 現成的IC 可以做到就最好la~~

上面你 part list, 買齊就唔需要用 programmer 了
作者: soilderman83    時間: 2006-11-6 00:28
原帖由 觀星是答案 於 2006-11-5 12:06 發表
Part list for 警察閃燈 LM-556 / NE-556 set
線路圖要返公司先 scan 上來

IC
LM556 或 NE556 (Dual Timer) * 1
74LS04 (Not Gate / Inverter) * 1
74LS08 (AND Gate) * 1

Resistor
100 Ohm * 3
12 ...

Thanks for sharing and I will take the list to find my friend to discuss how to assembly!
作者: 觀星是答案    時間: 2006-11-6 00:29
原帖由 soilderman83 於 2006-11-6 00:28 發表

Thanks for sharing and I will take the list to find my friend to discuss how to assembly!

張線路圖聽日會 scan 上來 wo
作者: jackychau    時間: 2006-11-6 13:54
原帖由 觀星是答案 於 2006-11-6 00:23 發表

上面你 part list, 買齊就唔需要用 programmer 了


Thanks~~
作者: 觀星是答案    時間: 2006-11-6 14:00
唔記得帶張圖返公司 scan tim !
作者: jackychau    時間: 2006-11-7 10:08
原帖由 觀星是答案 於 2006-11-6 14:00 發表
唔記得帶張圖返公司 scan tim !


ohoh...唔緊要, 我有耐性~~hehe
我都要等星期六日先過深水步買零件
作者: jasonbb    時間: 2006-11-7 10:28
原帖由 觀星是答案 於 2006-11-5 12:06 發表
Part list for 警察閃燈 LM-556 / NE-556 set
線路圖要返公司先 scan 上來

IC
LM556 或 NE556 (Dual Timer) * 1
74LS04 (Not Gate / Inverter) * 1
74LS08 (AND Gate) * 1

Resistor
100 Ohm * 3
12 ...

等我返學校睇下拎唔拎到先~
作者: jasonbb    時間: 2006-11-7 11:42
觀星是答案兄.......
你係邊到蝕板架?
作者: 觀星是答案    時間: 2006-11-7 11:46
原帖由 jasonbb 於 2006-11-7 11:42 發表
觀星是答案兄.......
你係邊到蝕板架?

屋企 .... 好危險的說 ....
作者: jasonbb    時間: 2006-11-7 11:53
原帖由 觀星是答案 於 2006-11-7 11:46 發表

屋企 .... 好危險的說 ....

蝕完d水點搞呀?
作者: jackychau    時間: 2006-11-7 13:51
原帖由 jasonbb 於 2006-11-7 10:28 發表

等我返學校睇下拎唔拎到先~


o華~~你讀EE 的??
作者: 觀星是答案    時間: 2006-11-7 13:56
原帖由 jasonbb 於 2006-11-7 11:53 發表

蝕完d水點搞呀?

等佢乾返, 會結晶, 下次再用
作者: jasonbb    時間: 2006-11-7 14:15
原帖由 jackychau 於 2006-11-7 13:51 發表


o華~~你讀EE 的??

對~
作者: jasonbb    時間: 2006-11-7 14:15
原帖由 觀星是答案 於 2006-11-7 13:56 發表

等佢乾返, 會結晶, 下次再用

咁都得?!
作者: 觀星是答案    時間: 2006-11-7 14:19
原帖由 jasonbb 於 2006-11-7 14:15 發表

咁都得?!

係可以架 wo ~ 本身佢買返來都是脫水結晶體來的
不過唔用時, 真係要用密氣的盒裝好, 唔係就慘啦 ~
作者: jasonbb    時間: 2006-11-7 14:21
原帖由 觀星是答案 於 2006-11-7 14:19 發表

係可以架 wo ~ 本身佢買返來都是脫水結晶體來的
不過唔用時, 真係要用密氣的盒裝好, 唔係就慘啦 ~

等我去買返d試下先........去華輝定和興買好呀?
作者: 觀星是答案    時間: 2006-11-8 12:11
原帖由 jasonbb 於 2006-11-7 14:21 發表

等我去買返d試下先........去華輝定和興買好呀?

是但啦 ~
作者: 觀星是答案    時間: 2006-11-8 12:13
Circuit scan o左上來啦, 有興趣就自搞先啦

作者: soilderman83    時間: 2006-11-10 10:33
原帖由 觀星是答案 於 2006-11-8 12:13 發表
Circuit scan o左上來啦, 有興趣就自搞先啦

thanks for sharing but the picture is not clear,diffcult to see wo!
作者: 觀星是答案    時間: 2006-11-10 10:37
原帖由 soilderman83 於 2006-11-10 10:33 發表

thanks for sharing but the picture is not clear,diffcult to see wo!

已經好 clear 架啦
需要的資料都已經寫晒上張紙度 !
作者: soilderman83    時間: 2006-11-10 10:58
How much If I buy all parts of the list,thanks!
作者: soilderman83    時間: 2006-11-10 11:04
Also I want to know this parts the size is it large?If yes,Could you design a small size with simple function,thanks!

[ 本帖最後由 soilderman83 於 2006-11-10 11:24 編輯 ]
作者: 觀星是答案    時間: 2006-11-10 11:05
原帖由 soilderman83 於 2006-11-10 10:58 發表
How much If I buy all parts of the list,thanks!

淨係個 list 的零件係唔夠的
仲有 o的 PCB 板, 線, IC 座 o個 o的無 list 到出來

List 出來的是核心零件 only
I think around $50
但有時 o的 o野會 DOA 的, 有多件 spare 會好 o的
作者: soilderman83    時間: 2006-11-12 16:22
原帖由 觀星是答案 於 2006-11-10 11:05 發表

淨係個 list 的零件係唔夠的
仲有 o的 PCB 板, 線, IC 座 o個 o的無 list 到出來

List 出來的是核心零件 only
I think around $50
但有時 o的 o野會 DOA 的, 有多件 spare 會好 o的

Thank you so much!
作者: rk2    時間: 2006-11-19 21:42
Have you got the time to update the part list ?
作者: 觀星是答案    時間: 2006-11-19 21:45
原帖由 rk2 於 2006-11-19 21:42 發表
Have you got the time to update the part list ?

part list ? 上面有晒 part list 同 circuit 啦 ~
作者: DriftNoobie    時間: 2006-11-19 23:34
ABC Hobbies 即將會出, 有兩款單燈頭同三款長身 (bar) 型既.
作者: 觀星是答案    時間: 2006-11-20 12:42
原帖由 DriftNoobie 於 2006-11-19 23:34 發表
ABC Hobbies 即將會出, 有兩款單燈頭同三款長身 (bar) 型既.

仲好, 又可以唔駛整, 買現成啦
作者: DriftNoobie    時間: 2006-11-20 20:23
Bar unit = 4,000yen. around HK$300

Single light unit = 2,000yen
作者: 觀星是答案    時間: 2006-11-21 09:47
依 ~ 原來我 DIY 會平好多 wo ~
作者: gibson    時間: 2006-11-21 10:44
原帖由 觀星是答案 於 2006-11-21 09:47 發表
依 ~ 原來我 DIY 會平好多 wo ~



Of course, thats why I am waiting for your products>>>><<<<<
作者: SpeedhunterHK    時間: 2006-11-21 10:49
IS this what you guys are making,the flashing strobe?

http://www.youtube.com/watch?v=3ZiLUguQPGE

This is what i have got on the hiace

[ 本帖最後由 SpeedhunterHK 於 2006-11-21 13:55 編輯 ]

作者: SpeedhunterHK    時間: 2006-11-21 13:58
THis can work with 6v~12v
作者: 觀星是答案    時間: 2006-11-21 14:31
原帖由 SpeedhunterHK 於 2006-11-21 10:49 發表
IS this what you guys are making,the flashing strobe?

http://www.youtube.com/watch?v=3ZiLUguQPGE

This is what i have got on the hiace

係 o甘上下啦 ~
作者: SpeedhunterHK    時間: 2006-11-21 14:33
how much did you spend on it?
作者: 觀星是答案    時間: 2006-11-21 14:59
原帖由 SpeedhunterHK 於 2006-11-21 14:33 發表
how much did you spend on it?

無計 o甘足 wo ~
around $50 / set 啦
作者: SpeedhunterHK    時間: 2006-11-21 15:15
標題: 回復 #64 觀星是答案 的帖子
IS it inc the leds as well?
作者: 觀星是答案    時間: 2006-11-21 17:07
原帖由 SpeedhunterHK 於 2006-11-21 15:15 發表
IS it inc the leds as well?

不包括 ~
因為多少 LED 是自己決定的
不過一粒 LED 都是 $2.5 吧
作者: SpeedhunterHK    時間: 2006-11-21 20:18
Ohhhh
I have spended $28 for the strobe,but its not inc the leds as well!
作者: rk2    時間: 2006-12-16 15:49
one more question, is the frequency of the flashing controlable by changing some component ? VR or cap . .... ?
作者: 觀星是答案    時間: 2006-12-17 12:31
原帖由 rk2 於 2006-12-16 15:49 發表
one more question, is the frequency of the flashing controlable by changing some component ? VR or cap . .... ?

Resistor 控制閃的 Frequency
Cap 控制 LED 開同關的時間比例 (依家大約係 1:1 的, 即開半秒就關半秒)
作者: rk2    時間: 2006-12-18 18:59
原帖由 觀星是答案 於 2006-12-17 12:31 發表

Resistor 控制閃的 Frequency - 看來應是 240k 或 500k 的那2 顆吧 , 是換其中一顆或是 2 顆都換? 有無數值參考 ?
Cap 控制 LED 開同關的時間比例 (依家大約係 1:1 的, 即開半秒就關半秒)
唔係好明, 可唔可以講多少少 ?   thks
作者: 觀星是答案    時間: 2006-12-18 19:11
原帖由 rk2 於 2006-12-18 18:59 發表
唔係好明, 可唔可以講多少少 ?   thks

好多 o野, 唔識講
自己睇說明書
http://www.electronics-tutorials.com/devices/555.htm
作者: rk2    時間: 2006-12-19 09:19
原帖由 觀星是答案 於 2006-12-18 19:11 發表

好多 o野, 唔識講
自己睇說明書
http://www.electronics-tutorials.com/devices/555.htm


Thank you , 不過有排睇 !!  或者用 bread board 慢慢試不同 value 的 r 同 c 來玩下啦.
不過若將 紅及藍 LED 各改成 2 粒 串聯, 或 3 粒 又推唔推得起 ?
作者: 觀星是答案    時間: 2006-12-19 09:46
原帖由 rk2 於 2006-12-19 09:19 發表


Thank you , 不過有排睇 !!  或者用 bread board 慢慢試不同 value 的 r 同 c 來玩下啦.
不過若將 紅及藍 LED 各改成 2 粒 串聯, 或 3 粒 又推唔推得起 ?

Power source 未必得, Power sink 就應該 ok
一係用 transistor 放大個 current 佢
作者: rk2    時間: 2006-12-22 12:29
觀星兄,
想問下 10 nF ( 0.01 uF ) 及 1 uF 係未都用電解電容架 ?睇相好似係CERMAIC CAP   係華輝搵唔到 10 nF 電解電容 TIM.   , 想玩 FREQUENCY CHANGE 要轉邊粒電阻為 VR 好D ?
作者: tom001    時間: 2007-3-27 02:55
我畫既
唔知work唔work

作者: tom001    時間: 2007-3-27 02:56
零件num

作者: tom001    時間: 2007-3-27 02:59
最後 thank you觀星是答案 個電路圖
作者: tom001    時間: 2007-3-27 03:05
較清楚o的圖

作者: tom001    時間: 2007-3-27 03:06
最後一張

作者: rk2    時間: 2007-3-27 13:50
sorry, 睇唔明你 d 圖喎  !
作者: tom001    時間: 2007-3-27 17:29
唔明咩
作者: janlyfa    時間: 2007-6-1 09:55
哈哈.. 买齐IC 了..
呢个星期反去整反个先.~~
作者: ice1234    時間: 2007-7-2 13:20
原帖由 觀星是答案 於 2006-12-17 12:31 PM 發表

Resistor 控制閃的 Frequency
Cap 控制 LED 開同關的時間比例 (依家大約係 1:1 的, 即開半秒就關半秒)

50% duty cycle
作者: BM4ADT    時間: 2008-9-4 17:45
請問樓主小弟將線路完成後,LED完全無動作
但是將74LS08第2腳與第5腳OPEN的,2顆LED會恆亮
請問是何處出問題呢?

[ 本帖最後由 BM4ADT 於 2008-9-4 18:41 編輯 ]
作者: 觀星是答案    時間: 2008-9-5 13:13
原帖由 BM4ADT 於 2008-9-4 17:45 發表
請問樓主小弟將線路完成後,LED完全無動作
但是將74LS08第2腳與第5腳OPEN的,2顆LED會恆亮
請問是何處出問題呢?

如果你要用 3 / 6 腳 output
o甘 2 / 5 腳係唔可以接空的
作者: BM4ADT    時間: 2008-9-6 14:47
但是完整照線路圖完成電路
完全沒有動作
不知是哪邊出錯
作者: 觀星是答案    時間: 2008-9-6 14:51
原帖由 BM4ADT 於 2008-9-6 14:47 發表
但是完整照線路圖完成電路
完全沒有動作
不知是哪邊出錯

我張 circuit 的 74LS08 的 2 / 5 腳不是 open 的
作者: BM4ADT    時間: 2008-9-6 16:04
目前小弟是依照您的線路1:1完全無更改
但就是無動作




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2