RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 我的兩件新衣 : SC10 / RC8.2e [打印本頁]

作者: RC_BRYAN_RC 時間: 2012-6-4 17:56
標題: 我的兩件新衣 : SC10 / RC8.2e
本帖最後由 RC_BRYAN_RC 於 2012-6-4 17:58 編輯

Easy paint job but very nice!

[attach]629222[/attach][attach]629223[/attach][attach]629224[/attach][attach]629225[/attach][attach]629226[/attach][attach]629227[/attach][attach]629228[/attach][attach]629229[/attach][attach]629230[/attach][attach]629231[/attach][attach]629232[/attach][attach]629233[/attach]

作者: RC_BRYAN_RC 時間: 2012-6-4 18:01
[attach]629234[/attach]

作者: turbo997 時間: 2012-6-4 18:05
Is you use the 3047 tire is ok?

作者: mlee 時間: 2012-6-4 18:06
Wow, the SC shell looks very nice!!! large silverback and Hudy sticker are very sharp!!!

作者: ikesan 時間: 2012-6-4 18:12
bro! u always white & orange...........but nice!

作者: RC_BRYAN_RC 時間: 2012-6-4 18:27
回復 turbo997 的帖子

Nah... very slippery, i also tried Proline Blockade, Tazer and Caliber. the most consistance one is Caliber, the other both is fine at the beginning but start slippering after the blocks gab filled up with sands in around 10 minutes. Surprisingly the caliber didn't collect so much sands, I think Lali should use tires with wider block gabs.

作者: RC_BRYAN_RC 時間: 2012-6-4 18:35
本帖最後由 RC_BRYAN_RC 於 2012-6-4 18:38 編輯

回復 ikesan 的帖子

Single color always the easiest job man!! if you wanted to see different colors from me ... i can show you my pink stuff next time

作者: turbo997 時間: 2012-6-4 18:47
本帖最後由 turbo997 於 2012-6-4 18:53 編輯

RC_BRYAN_RC 發表於 2012-6-4 18:27

登錄/註冊後可看大圖

回復 turbo997 的帖子

Nah... very slippery, i also tried Proline Blockade, Tazer and Caliber. the mo ...

I think is the Tire not match your setup.

Next time I can share my new setup to you.I use this tire I feel the Grip is enough. And the Tire info is said this tire is for the a little wet track to use. And I also use this pattern (3058) in the 2wD car.It can give me more power to easy to jump the 3 jumps.
I use this tire (3047)on my 811E can make faster lap is 28.89 now

作者: RC_BRYAN_RC 時間: 2012-6-4 19:44
本帖最後由 RC_BRYAN_RC 於 2012-6-4 19:46 編輯

回復 turbo997 的帖子

It will be great to share your exprience.

maybe my setup is not matching the tires. What esc and motor you use on your 811E?
I am using 2650KV motor on my 8.2e, it has more than enough power and Caliber has best tractions on it, i use 2050KV on my DEX408 and (3047) has much better traction than 8.2e. probably this is the reason. What do you think?

作者: Mkflee 時間: 2012-6-4 19:45
太型仔!

作者: turbo997 時間: 2012-6-4 19:59

RC_BRYAN_RC 發表於 2012-6-4 19:44

登錄/註冊後可看大圖

回復 turbo997 的帖子

It will be great to share your exprience.

I also us the Tekin 2650 and Tekin ESC
But I set the hi point use 80% .And I make the TH curve to -45% .
I think you are over power and the car setup problem. Maybe the the shock oil to thick!

作者: RC_BRYAN_RC 時間: 2012-6-4 20:29
My shocks is using the original fluid setup, Front and rear both 30wt, maybe trying to use 3.25lbs softer rear spring and step by step to try your setting this week to see the difference, thanks for sharing your opinion and good suggestion.

作者: kennethgo 時間: 2012-6-4 20:34
Wor! 好正呀！

作者: benlau 時間: 2012-6-5 02:29
回復 RC_BRYAN_RC 的帖子

型到爆！

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)