RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 又有Yokomo 頭單安裝問題 [打印本頁]

作者: hkopium 時間: 2006-1-28 21:53
標題: 又有Yokomo 頭單安裝問題
我準備安裝頭單, 但無 manual.

I am using Drift Package Upgrade pack #2. 個 package 入面, 頭單部份已經整好.

另跟一黑色大齒輪, 2 隻銀色介指, 2 粒黑色細 screws, 2 隻細黑色膠 stoppers. 呢一埋野要點裝法呀?

同埋方向應該點?

(1) 頭單一邊長D既. 個黑齒輪係咪安係短D果邊? 同D齒紋係咪向住長D果邊?
(2) 安裝係 Housing/座入面時, 長D果邊係對住 motor 定 Battery 果邊?

(3) 係黑齒輪上用 Tamiya Anti Wear Grease 定 Differential Grease 好D?

[ 本帖最後由 hkopium 於 2006-1-29 04:45 編輯 ]

作者: DC-5 時間: 2006-1-28 22:02

原帖由 hkopium 於 2006-1-28 21:53 發表
我準備安裝頭單, 但無 manual.

I am using Drift Package Upgrade pack #2. 個 package 入面, 頭單部份已經整好.

另跟一黑色大齒輪, 2 隻銀色介指, 2 粒黑色細 screws, 2 隻細黑色膠 stoppers. 呢一埋 ...

打比我吧

作者: hkopium 時間: 2006-1-28 22:33
Thank you DC-5 兄. 應該可以攪定

作者: hkopium 時間: 2006-1-29 04:45
攪左四粒鍾, 大執完個車既前半部份, 換左D新 hop-ups, 金屬 parts, 轉哂 RPM cups, 同落番D潤滑油之類.

我想確定下有無安裝錯:
而家向前推右邊前輪, 佢會好順向前轉但左邊既毫無反應.
推右邊前輪向後時, 格格下, 左右一起向後轉.
咁積係正確呀呵?

[ 本帖最後由 hkopium 於 2006-1-29 04:48 編輯 ]

作者: Edde 時間: 2006-1-29 15:05
hkopium兄,我個前輪是不能向後轉的

作者: AMAT 時間: 2006-1-29 15:07

原帖由 hkopium 於 2006-1-29 04:45 發表
攪左四粒鍾, 大執完個車既前半部份, 換左D新 hop-ups, 金屬 parts, 轉哂 RPM cups, 同落番D潤滑油之類.

我想確定下有無安裝錯:
而家向前推右邊前輪, 佢會好順向前轉但左邊既毫無反應.
推右邊前輪向後時, 格 ...

話明單向就梗係向前FREE ROLLING啦~!哈!

作者: hkopium 時間: 2006-1-29 18:59

原帖由 Edde 於 2006-1-29 15:05 發表
hkopium兄,我個前輪是不能向後轉的

向後係完全鎖死定係好緊"格格"聲?

作者: Edde 時間: 2006-1-29 20:25

原帖由 hkopium 於 2006-1-29 18:59 發表

向後係完全鎖死定係好緊"格格"聲?

hkopium兄,是好緊的格格聲,應該是行齒聲,

作者: sunshine 時間: 2006-1-29 22:03
where can buy yokomo drift upgrade #1 and #2 thx

作者: hkopium 時間: 2006-1-29 23:20

原帖由 Edde 於 2006-1-29 20:25 發表

hkopium兄,是好緊的格格聲,應該是行齒聲,

哦, 咁我應該安裝正確羅一呵呵呵.

釘Q, 釘Q!

作者: hkopium 時間: 2006-1-29 23:21

原帖由 sunshine 於 2006-1-29 22:03 發表
where can buy yokomo drift upgrade #1 and #2 thx

I think both packages are out of stock in Hong Kong. But you can try Waigo in Yau Ma Tei.

作者: Jim 時間: 2006-1-30 09:43

原帖由 hkopium 於 2006-1-29 23:21 發表

I think both packages are out of stock in Hong Kong. But you can try Waigo in Yau Ma Tei.

you didn't use frony one way in last party mei???

作者: sunshine 時間: 2006-1-30 22:10
wai go dont have ar! i buy a d1 package on wai go
but they are not instock upgrade pake

they say if want to buy bearing or front oneway
shound be one thing one thing to buy ar!

作者: hkopium 時間: 2006-1-30 22:16

原帖由 Jim 於 2006-1-30 09:43 發表

you didn't use frony one way in last party mei???

No ah. I didn't use Front One-way in last Drift Party. Front was still using Ball Differential but I installed the "fake" One-way Shaft.

Now I installed the Front One-Way.

作者: hkopium 時間: 2006-1-30 22:18

原帖由 sunshine 於 2006-1-30 22:10 發表
wai go dont have ar! i buy a d1 package on wai go
but they are not instock upgrade pake
they say if want to buy bearing or front oneway
shound be one thing one thing to buy ar!

Okay lar. The Drift Package is simple a combo of many small parts.

Buy bearings and front one-way separately is okay. Price not that much different.

作者: sunshine 時間: 2006-2-1 21:41
ok i know, thank you hkopium!!!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)