RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: New Kyosho 1/12 [打印本頁]

作者: Bluebird 時間: 2012-1-2 11:18
標題: New Kyosho 1/12
Is it available in KWS? Looking good, want to have one.
Any other suggestion? Requirement: 1) Metric screw; 2) Common wheel hub; and 3) Parts availability.
Thanks

作者: jypepe 時間: 2012-1-2 11:32
http://www.kyosho.com/jpn/produc ... l?product_id=108169

日本都係12月29發售日, 香港冇咁快掛?

作者: ernestf 時間: 2012-1-2 16:16
It looks good but parts might be hard to find ... Go for Serpent or Xray ....

作者: hardmankam 時間: 2012-1-3 13:11
Unless you are a Kyosho 'diehard' fan, I agree that another brand is better because of parts availability in HK.

作者: chris6200 時間: 2012-1-3 13:50
too expense

作者: Bluebird 時間: 2012-1-3 14:43
Thanks!
But what about serpent and x-ray? Which one is better under the same requirements?

作者: garywong5368 時間: 2012-1-3 16:13
自從孖星出左部12仔1100元想再等Q嫂睇怕都過1700元仲未必有件所以把心一橫買左蛇
求其買serpent and x-ray and Asso..都好過Q嫂,因為serpent and x-ray 可以橫直電任放

作者: ernestf 時間: 2012-1-3 16:48
I have both Serpent and Xray. Design-wise, S120LT and x12 Link are similar. S120LT allows the Lipo to place either left side or right side.
Material-wise, I would vote for Xray, plastic material is good, ball bearings are high grade.
Part support - I think both brand are easy to get in HK.

作者: hardmankam 時間: 2012-1-3 19:35
本帖最後由 hardmankam 於 2012-1-3 19:40 編輯

both xray and serpent are very good cars. their parts fit very well and the parts are easy to get in hk. i too vote for xray as their material is a little better than serpent.

xray has some issues with the rear carbon axle before, i dont know if their link car still comes with the old axle or the new axle.

作者: 清清 時間: 2012-1-3 22:45
香港代理會唔會返貨已經係一個問題，代理返唔返零件係大前題，
再者代理會開出幾高天價更加無人會知，因為代理跟本唔知行程！

作者: Bluebird 時間: 2012-1-4 07:48
Thanks, will check serpent and xray

作者: tiger1 時間: 2012-1-4 07:53

jypepe 發表於 2012-1-2 11:32

登錄/註冊後可看大圖

http://www.kyosho.com/jpn/products/rc/detail.html?product_id=108169

日本都係12月29發售日, 香港冇咁 ...

hard to say, HK may have some 'water goods'

作者: asaka 時間: 2012-1-5 01:51
TOP 1/12 has better design for lipo

作者: Bluebird 時間: 2012-1-6 20:33
After thinking & thinking, decide to Sepernt.
Thanks all of you.

作者: hardmankam 時間: 2012-1-6 20:51
good choice, welcome to the 1/12 family!

作者: Bluebird 時間: 2012-1-10 16:16
I found there is no spur gear included in the Serpent kit (read from RCMan, I'm still waiting for mine). Is it the same as touring spur gear? Or special spur gear for 1/12?

作者: ernestf 時間: 2012-1-10 17:38
suggest to use 88t-94t spur, Xenon VSS for DD (direct drive)
http://www.roche.hk/shopping/ind ... &product_id=373

作者: Bluebird 時間: 2012-1-11 11:48
Thanks, will get it!
And about the gear ratio, if I use 1s lipo & 13.5t (at first, after test/practice, may use 5.5t), what is the gear ratio I should use for initial setup?

作者: ernestf 時間: 2012-1-18 20:36
Received my Ra today ;)

作者: ernestf 時間: 2012-1-18 21:44
回復 ernestf 的帖子

Price is in between xray and yokomo. Got it from local store here in Singapore. Will post more pictures once it is built.

作者: lcvwing 時間: 2012-1-21 09:59
香港有無得賣嫁？

作者: garywong5368 時間: 2012-1-21 17:35
Price is in between xray and yokomo
$1750-$2550 why buy kyosho?

作者: garywong5368 時間: 2012-1-21 17:37
唯一貪佢零件平過xray呱

作者: Bluebird 時間: 2012-1-23 20:25
I have my S120LT, asembling

作者: chris6200 時間: 2012-1-24 14:51
Great!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)