tugs1.jpg (63.47 KB, 下載次數: 16)
2011-11-16 12:24 上傳
tug2.jpg (73.53 KB, 下載次數: 12)
2011-11-16 12:24 上傳
作者: 自由人 時間: 2011-11-16 12:34
師兄 有新玩具....
作者: JerryLeung12 時間: 2011-11-16 12:37
YES ar, no time to build.. but now i will start law. just buy all components for ESC, MIXER, BOW thruster, copper propeller.. etc. haha. wish can complete it before chineses new year la.
作者: antony_wong2001 時間: 2011-11-16 12:42
係邊度買BOW thruster？
作者: 自由人 時間: 2011-11-16 12:45
本帖最後由 自由人 於 2011-11-16 13:03 編輯
JerryLeung12 發表於 2011-11-16 12:37
YES ar, no time to build.. but now i will start law. just buy all components for ESC, MIXER, BOW thr ...
努力,,
作者: JerryLeung12 時間: 2011-11-16 13:03
KWS
作者: JerryLeung12 時間: 2011-11-16 13:04
GOOD we build a new ship also haha
作者: JerryLeung12 時間: 2011-11-16 13:11
本帖最後由 JerryLeung12 於 2011-11-16 13:14 編輯
I will painted with this color
The picture come from a European RC boat maker
tug3.jpg (9.2 KB, 下載次數: 10)
2011-11-16 13:11 上傳
tug4.jpg (105.23 KB, 下載次數: 13)
2011-11-16 13:14 上傳
作者: antony_wong2001 時間: 2011-11-16 13:24
生交叉？唔該
作者: antony_wong2001 時間: 2011-11-16 13:25
JerryLeung12 發表於 2011-11-16 13:11
I will painted with this color
The picture come from a European RC boat maker
祝你早日成功。
作者: 自由人 時間: 2011-11-16 13:53
JerryLeung12 發表於 2011-11-16 13:11
I will painted with this color
The picture come from a European RC boat maker
師兄 你鍾意歐洲船款....好靚..
作者: chanknono 時間: 2011-11-16 14:39
我好仲意個船尾ar，C兄你隻新船係5係一樣嫁
作者: 平民艦隊 時間: 2011-11-16 14:54
隻拖船好新好靚，謝謝圖片分享
作者: Dork 時間: 2011-11-16 15:16
JerryLeung12 發表於 2011-11-16 13:11
I will painted with this color
The picture come from a European RC boat maker
幾錢師兄
作者: JerryLeung12 時間: 2011-11-16 15:47
Chanknono Ching : yes ar but I now only start to fix and the fibre hull polishing complete law
作者: JerryLeung12 時間: 2011-11-16 15:49
Dork Ching: cos some parts I make some part I order from England and the electronic parts I search and match but I think total about hkd8000
作者: JerryLeung12 時間: 2011-11-16 19:04
其實只是吉拿前車,廣華街或Jet 都有賣,
作者: cardo 時間: 2011-11-17 18:54
架拖船好靚好型呀~!!!
快D趕工啦~!!
作者: JerryLeung12 時間: 2011-11-17 18:59
好牙,但要秘密進行,大人話再多一架,佢會一次個將所有船破壞\(“▔□▔)/
作者: 自由人 時間: 2011-11-17 19:05
你同老虎講 : 其實我每買一隻船仔,都會買一隻鑽介比你..大家都有玩具玩下..( 應該買幾多隻船都冇問題嫁....)
作者: JerryLeung12 時間: 2011-11-19 00:22
I change idea law, i will use this color pattern and start build tomorrow.
tug5.jpg (99.99 KB, 下載次數: 8)
2011-11-19 00:22 上傳
作者: cardo 時間: 2011-11-19 00:48
哇~嚟張相"正"!!
有機會的話,我都想上真船~
再舉高架"小露寶" 影張相....哈哈
作者: JerryLeung12 時間: 2011-11-19 18:30
本帖最後由 JerryLeung12 於 2011-11-19 18:32 編輯
After the glassfibre hull build up and no continue long time, now start up again.. step 1 : prepare gear and rudder part.. Oh bb cry... need stop and continue next week..
作者: 自由人 時間: 2011-11-19 21:52
JerryLeung12 發表於 2011-11-19 18:30
After the glassfibre hull build up and no continue long time, now start up again.. step 1 : prepare ...
師兄 努力" 加油"
作者: JerryLeung12 時間: 2011-11-19 22:30
Thks, i want to use my BB car to transport this ship ... haha.... BB.. sorry ar!
作者: 自由人 時間: 2011-11-19 22:32
JerryLeung12 發表於 2011-11-19 22:30
Thks, i want to use my BB car to transport this ship ... haha.... BB.. sorry ar!
你帶邊隻船呢..用 BB 車....
作者: JerryLeung12 時間: 2011-11-19 22:50
No... i will still play paula III tomorrow (check after reapir ok or not), and i think dutch courage need 3 months installation time.
作者: 自由人 時間: 2011-11-19 22:53
JerryLeung12 發表於 2011-11-19 22:50
No... i will still play paula III tomorrow (check after reapir ok or not), and i think dutch coura ...
慢慢整唔急得,,有心情想整先整,,,心急整就唔靚.....
作者: JerryLeung12 時間: 2011-12-2 23:34
本帖最後由 JerryLeung12 於 2011-12-2 23:34 編輯
Ei ya.... yesterday night i add too much thinner to the "Filler" and not enough hardener , tonight come back...... WOW........... long time no see the terrible thing.... All filler have "CRACK" ,...........
........... clean it 3 hrs................
作者: 自由人 時間: 2011-12-3 10:58
JerryLeung12 發表於 2011-12-2 23:34
Ei ya.... yesterday night i add too much thinner to the "Filler" and not enough hardener , tonight c ...
,,,,,,咁大鑊......
作者: JerryLeung12 時間: 2011-12-5 23:57
本帖最後由 JerryLeung12 於 2011-12-6 00:02 編輯
Update progress... very very slow, i strengthen a lot about water prevention step
Epoxy (Jelly) + Epoxy (hard) + Filler + Epoxy (Jelly) + Star Star Putty + Base coating.....
progress 1.jpg (235.51 KB, 下載次數: 11)
2011-12-5 23:57 上傳
作者: cardo 時間: 2011-12-6 00:04
差不多喇~ 差不多喇~快D起貨放落水~~~!!!!
作者: 自由人 時間: 2011-12-6 11:24
JerryLeung12 發表於 2011-12-5 23:57
Update progress... very very slow, i strengthen a lot about water prevention step
Epoxy (Jelly) ...
喂!喂!喂!.......慢慢啦.....真係唔洗急,,不過最緊要.....快.....
作者: 自由人 時間: 2011-12-6 11:26
落水..就幾時都得啦..... 搵你隻 小露寶 拖住行 未得囉......:lo
橫掂都要試壓水......l
作者: cardo 時間: 2011-12-6 12:03
都好喎~!! 下次我拎埋架修咸頓要嚟拖住行先~作者: 自由人 時間: 2011-12-6 12:12
拖船一定要試左壓水先加麻.......
作者: JerryLeung12 時間: 2011-12-6 13:17
回復 自由人 的帖子
i original have a small tug, but sell yesterday law.
And agree ar, test water line and water eating volume very important.
Later call Cargo to help ... haha
作者: 自由人 時間: 2011-12-6 13:33
趕工...趕工........
作者: cardo 時間: 2011-12-6 14:49
^^非常樂意help you!
我今晚返去都噴下油先！
作者: 自由人 時間: 2011-12-6 15:02
又噴油.........
作者: JerryLeung12 時間: 2011-12-6 15:14
噴油 good ar, it is the final step / or modify step... relax step
作者: 自由人 時間: 2011-12-6 15:26
你隻拖船又搞成點呀.......
作者: JerryLeung12 時間: 2011-12-6 15:32
回復 自由人 的帖子
Tonight i will install BOW Thruster, and saturday cutting hull and spray base coating, maybe sunday or next week install electrical circuit, i think can test the hull in christmas and the superstructure may complete before CNY
作者: 自由人 時間: 2011-12-6 15:48
JerryLeung12 發表於 2011-12-6 15:32
回復 自由人 的帖子
Tonight i will install BOW Thruster, and saturday cutting hull and spray base co ...
總之努力啦..加油"
作者: shipourking 時間: 2011-12-6 15:51
Modelslipway 好難砌
作者: JerryLeung12 時間: 2011-12-6 16:23
回復 shipourking 的帖子
Yes, and most difficult is i only buy 30 % of their product, hull ,make by myself, electrical self searc from market , and metal parts i change a lot, original not enough strong.
作者: 自由人 時間: 2011-12-6 16:26
JerryLeung12 發表於 2011-12-6 16:23
回復 shipourking 的帖子
Yes, and most difficult is i only buy 30 % of their product, hull ,make by ...
你係咪返緊工嫁.....小心老細係你後面..一陣踢你屁股.....
作者: JerryLeung12 時間: 2011-12-6 16:32
回復 shipourking 的帖子
You also fixed Modelslipway before ar? (sometimes i think made by myself more easy than buy this) But most difficult model is England producer "Speedline" it is the most beautiful RC boat model in the world, but no instruction sheet, no electrical diagram, no step, and very very expensive.
作者: JerryLeung12 時間: 2011-12-6 16:43
回復 自由人 的帖子
Yes, i want to kill by him hahaha
作者: 自由人 時間: 2011-12-6 16:51
小心佢唔聲唔聲一腳踢你屁股....
作者: cardo 時間: 2011-12-6 21:40
本帖最後由 cardo 於 2011-12-6 21:44 編輯
今晚冇得噴喇~
原本打算噴返D欄杆~
忙到走唔到出去買材料>"<!!!!!!
唯有明天再去過~
作者: 自由人 時間: 2011-12-6 21:42
最緊要隻 修咸頓 等埋我 果隻.......
作者: cardo 時間: 2011-12-6 21:45
我果隻要遲少少了~
等我整埋架小露寶先再搞其他^^"
作者: 自由人 時間: 2011-12-6 21:46
咁我等埋你先整啦......
作者: cardo 時間: 2011-12-6 21:52
^^咁又唔使~
你拿拿聲整好佢星期日拎去玩啦~
我果架仲要排下期~
又要買返D材料~
最重要係有心情先可以搞.......
作者: 自由人 時間: 2011-12-6 22:14
星期日 唔知....趕唔趕到.....
作者: cardo 時間: 2011-12-6 22:15
本帖最後由 cardo 於 2011-12-6 22:16 編輯
星期六買完電變立即整都有機會趕得切
作者: cardo 時間: 2011-12-6 22:15
星期六買完電變立即整都有機會趕得切
作者: 自由人 時間: 2011-12-6 22:18
咁急...你教加麻...搞野 要有心情先得......
作者: cardo 時間: 2011-12-6 22:35
你啱~!!!!!!真係要有心情先得~!!!
上個星期我見到架船都冇咩心情郁~
作者: 自由人 時間: 2011-12-6 22:40
我都係想搞就搞下....唔想搞就掂都唔掂下......隻船...... <---- 驚D人又亂諗野....
作者: 自由人 時間: 2011-12-8 22:59
喂!喂!喂!有冇新進展呢......
作者: JerryLeung12 時間: 2011-12-8 23:39
I fixing the BOW Thruster and drill fibreglass.... i upload tomorrow.. haha
作者: 自由人 時間: 2011-12-9 10:49
JerryLeung12 發表於 2011-12-8 23:39
I fixing the BOW Thruster and drill fibreglass.... i upload tomorrow.. haha
收工返屋企記得出 木目 木目....
作者: JerryLeung12 時間: 2011-12-9 10:53
OK, and i already install "G brand" bb400 motor bow thruster law..
作者: 自由人 時間: 2011-12-9 10:55
記得今晚交下功課出下相.....
作者: JerryLeung12 時間: 2011-12-12 00:18
Progress 2 - install bow thruster completed
progress 2.jpg (120.74 KB, 下載次數: 5)
2011-12-12 00:18 上傳
作者: JerryLeung12 時間: 2011-12-12 00:26
slow progress....progress 2a.jpg (193.97 KB, 下載次數: 13)
2011-12-12 00:26 上傳
作者: JerryLeung12 時間: 2011-12-13 00:33
Give up water cooling, use 6V fan 45 degree cooling
progress 3.jpg (40.33 KB, 下載次數: 13)
2011-12-13 00:33 上傳
作者: 自由人 時間: 2011-12-13 11:09
有橫車啊.....正"
作者: JerryLeung12 時間: 2011-12-13 11:11
Yes, but bow thruster really difficult to install..
作者: 自由人 時間: 2011-12-13 11:12
裝到就得啦,,,試左水未呀....等你一齊玩嫁.....
作者: JerryLeung12 時間: 2011-12-13 11:16
Stop / Slow progress and move home soon...
作者: 自由人 時間: 2011-12-13 11:18
搬完屋搞掂晒D野先玩囉.....
作者: JerryLeung12 時間: 2011-12-13 11:23
OK, i will appear ASAP after move to new home
作者: 自由人 時間: 2011-12-13 11:27
GOOD........
作者: joesham 時間: 2011-12-15 10:54
Very good!!
作者: Leicaman 時間: 2011-12-15 13:20
想問下個馬達係咪有波箱？係香港可以買到同價錢是多少？thx
作者: JerryLeung12 時間: 2011-12-15 13:24
Yes, have gear box, This motor i buy from England, but HK also easy to find,
I calculate the ship size and use scale motor and gear box with BB500 and gear,
U can find some 540 motor in HK also good, cos Tug boat not use too high speed motor, but sure not use 2XX motor, sure burn!
作者: ragel 時間: 2011-12-15 13:53
師兄So good!
加油!! 我都好鍾意Dutch Courage這隻船~ 好靚~ 師兄你係訂返黎定係HK買的? 作者: JerryLeung12 時間: 2011-12-15 14:00
about 50% parts buy (superstructure and some decoration), hull self made and electronics parts in HK / England.
But buy from England , my experience is the england person not want to sell and not polite, and the delivery charge very expensive, 10kg HK$950... hahaha
But interesting is i can self made parts and use some their drawing and decoration, building time need half to one year.. quite happy ga
作者: 自由人 時間: 2011-12-15 14:12
JerryLeung12 發表於 2011-12-15 14:00
about 50% parts buy (superstructure and some decoration), hull self made and electronics parts in ...
又偷偷上網吹水...一陣比老細見到踢你屁股.....
作者: ragel 時間: 2011-12-15 14:32
JerryLeung12 發表於 2011-12-15 14:00
about 50% parts buy (superstructure and some decoration), hull self made and electronics parts in ...
oic~ 我見除左套kit外,仲有好多accessories同電子野要買~最重要同最好玩係裝~ 不過對於我d新手黎講,如果要整,一年半載都唔會起到貨la
不過我覺得架船好靚,期待師兄的完成品~作者: JerryLeung12 時間: 2011-12-15 16:37
也好，很累會踢醒，哈哈
作者: 自由人 時間: 2011-12-15 16:42
咁如果佢踢你..叫佢幫幫手大力D踢個屁股.....
作者: Leicaman 時間: 2011-12-15 23:11
回復 JerryLeung12 的帖子
Thanks..But can let me know where can find this type motor with gear box in HK?
I can`t see it in KWS.Thx
作者: JerryLeung12 時間: 2011-12-16 00:34
Leicaman 發表於 2011-12-15 23:11
回復 JerryLeung12 的帖子
Thanks..But can let me know where can find this type motor with gear box i ...
I buy in Jet Hobby before (many years before), try try ask them have or not? in front page this website can ask the boss have stock or not.
作者: 自由人 時間: 2011-12-16 11:32
聖誕隻船落得水未呀.....
作者: JerryLeung12 時間: 2011-12-16 11:49
可以，但只有船底。
作者: 自由人 時間: 2011-12-16 12:00
未好似冇著衫咁囉......
作者: JerryLeung12 時間: 2011-12-30 11:07
Rudder complete.. hardening and glue
image3.jpeg (25.04 KB, 下載次數: 10)
2011-12-30 10:51 上傳
image.2jpeg.jpeg (26.63 KB, 下載次數: 12)
2011-12-30 10:51 上傳
TANK 25M BB GUN TANK MODIFY COMPLETE AND WILL PLACE IN REAR DECK
image1.jpeg (40.89 KB, 下載次數: 8)
2011-12-30 10:51 上傳
作者: 自由人 時間: 2011-12-30 11:12
嘩" 真係裝 BB彈鎗好過份呀...真係想捉鯊魚.......
作者: joesham 時間: 2011-12-30 11:22
Ching 加油!!
作者: JerryLeung12 時間: 2011-12-30 11:25
NOT CATCH.. IS KILL SHARK.. 25M AIR GUN.. HAHAHA
作者: 自由人 時間: 2011-12-30 11:36
............殺鯊魚.........哼"
你落水就 口交 死你.......
1122307jd6gddebncg7zbp.jpg (36.43 KB, 下載次數: 9)
2011-12-30 11:35 上傳
作者: JerryLeung12 時間: 2011-12-30 11:39
Joke jei.. i love shark in pool, i will not kill shark, but bb gun i sure will install and fire the water or rock law.... hahaha
And electrical parts will complete in this new year holiday law... YEAH
作者: 自由人 時間: 2011-12-30 11:42
JerryLeung12 發表於 2011-12-30 11:39
Joke jei.. i love shark in pool, i will not kill shark, but bb gun i sure will install and fire th ...
JerryLeung12 發表於 2011-12-30 11:25
NOT CATCH.. IS KILL SHARK.. 25M AIR GUN.. HAHAHA <----鯊魚肯定追住你 口交 口交 口交"
作者: JerryLeung12 時間: 2011-12-30 12:34
My electrical parts will use this pattern..
electrical digram.JPG (33.49 KB, 下載次數: 19)
2011-12-30 12:34 上傳
作者: 138168 時間: 2011-12-30 20:19
鯊鱼仔，用呢幅相做头像..... 殺食
作者: 自由人 時間: 2011-12-30 21:35
呢幅個樣好惡喎...........
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |