[attach]560188[/attach]
[attach]560187[/attach]
picture released on 14/10/2011 作者: Marksman 時間: 2011-11-16 10:08
Very slim body, I think the internal layout is same as S811e or T8E作者: albertau2011 時間: 2011-11-16 10:09
what diff with DEX410v3作者: Marco明 時間: 2011-11-16 10:34
星期六唔落雨的話....................嘿嘿!!作者: Marksman 時間: 2011-11-16 19:31
Seem the F&R chassis brace have more strong and support than the T8E and 811e, however will it trade off the flexi properties? Really want to see how the car run in actual.作者: wildbruiser 時間: 2011-11-16 19:56
幾時見街呀！等吾到買架truggy玩住先作者: mansiu 時間: 2011-11-16 22:52
我都等待中作者: MR.TAMIYA 時間: 2011-11-17 07:32
我都等待中X2作者: 赤目軍馬 時間: 2011-11-17 22:59
Ｃ兄們知唔知幾時有貨呀，政府比的6000大元都要用尼買。作者: coolcooleric 時間: 2011-11-17 23:04 本帖最後由 coolcooleric 於 2011-11-17 23:06 編輯
my wish list
1 dex408 RX8+ 2000KV
2 desc410 SCT PRO + PRO4 4600KV作者: coolcooleric 時間: 2011-11-18 08:08
End of nov !!!!! But still hv to look at the layout whether it's worth it or not
我部dex210 用左hw 120a + Lrp x12 8.5t The esc Really JUST fit in!
Would there be a big difference between 2000kv and 2650kv ??作者: Marksman 時間: 2011-11-18 08:41 回復 coolcooleric 的帖子
Yes, there is a big different especially on the punch between 2000kv and 2650kv.
The closest ESC/motor combo To the RX8/2650kv I found so far is the castle ESC/2200kv used on the HPI Vorsa作者: Marksman 時間: 2011-11-18 09:40
>>coolcooleric punch 2000kv>2650kv speed 2650kv>2000kv correct??<<
Under the same voltage
Punch
2650>2000
Speed in straight
2650>2000
Low Torque
2000>2650作者: Marksman 時間: 2011-11-18 09:49
People said punch means how much the motor/power can follow your throttle finger, people always like the response of the power with no lagging or very sensitive when we apply the throttle just in gentle.
