smlming Hing, you post seem lock up, so I have the topic here first
Seem the TRX3.3 engine really not tough enough, let see if I can run this 2nd one one better.
I also thought to use another brand engine but the more $$$ not worth and may heavier
I also have an issue now, the air intake hose to the carb is so close to the spur gear, can I find some aftermarket to change it since the original one is very easy to break and leak, dust will get through the break hole to the engine directly. You can see why I wrapped the hose (the white part in the photo).
作者: Marksman 時間: 2011-11-14 15:16
Smlming, your Revo before seem over rpm and made this engine blown.
Mine above shoud be over heat due to too lean running
21 is too heavy for this chassis layout, will make it not balance good. Also these 21 bolt on engine is not cheap, cost at least $1600 or above, so finally I go back to original TRX3.3 which cost $975作者: Marksman 時間: 2011-11-15 00:03
>>tonglau2000 掛起佢可以放多 D : )<<
無錯, 我明天去買個組合鐵架, 13" x 23" x 60"高, 一層一架車放入去(拆轆), 不過都糸放6 架好了
