RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Losi Scte [打印本頁]

作者: coolcooleric    時間: 2011-10-19 10:40
標題: Losi Scte
買車啦!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
首先, Losi Scte 可以係邊度買? 如要大約訂要幾耐?
之後到motor   budget2000左右   
有咩好suggestion?最緊要爆,暴力

如果用1/8motor system 得唔得?

ps: 之前有ching 建議我買1/8既sc   不過我見到得ae有而且是rtr.....我想要kit...不過已經唔再出了
作者: fr888    時間: 2011-10-19 15:15
首先, Losi Scte 可以係邊度買? 如要大約訂要幾耐?

> Fast model @ victory street, order from kws, or order online

之後到motor   budget2000左右   
有咩好suggestion?最緊要爆,暴力

> Race legal: Tekin RX8 + Pro4 4600/4000
> Race "illegal": Hobbywing SC8 combo or any other 1/8 combo

如果用1/8motor system 得唔得?
> Duck

ps: 之前有ching 建議我買1/8既sc   不過我見到得ae有而且是rtr.....我想要kit...不過已經唔再出了
> SC8e very good!
作者: fr888    時間: 2011-10-19 15:33
回復 coolcooleric 的帖子

Factory Teams parts (Alu. shocks etc) or plastic like RTR? If FT, gogogo!
作者: coolcooleric    時間: 2011-10-19 15:44
Can u help me determine whether this is a FT version,

 

Authentic, scale 1.5mm thick short course truck unpainted body
Functional full roll cage with integral dirt shields
Functional and realistic front and rear bumpers with mud flaps
Scale wheels and tires with foam inserts and bead guards
Molded battery tray supports two ROAR-approved 1:10 scale size 7.4v LiPo battery packs with room for foam pads
Receiver box, servo, and battery tray remove from car in one piece for easy maintenance and cleaning
Convenient wire routing keeps critical electronic wires out of drive-train components and simplifies disassembly
Includes pinion gear (15T) and molded composite spur gear (46T)
Rigid one-piece motor mount utilizes standard motor screw mounting pattern
Large elevated speed control mounting area allows for easy screw mounting of common speed controllers
Upgraded dual bell-crank steering for more consistent steering and reduced bump-steer
16mm Big-Bore molded composite shocks with pre-load clips
Hard anodized 7075-T6 aluminum chassis
3mm aluminum shock towers
Durable 10mm thick suspension arms
Rear molded CVA boots to keep dirt and mud out of rear joints
Alloy steel turnbuckles
Caster blocks adjust 14, 16, or 18 degrees with molded inserts
Adjustable suspension pivot bushings for different pivot height options
4.30:1 ratio gearboxes
3.5mm light CVA drivetrain
Utilizes 3 hook-and-loop straps to secure LiPo batteries into battery tray
Enclosed receiver box to protects electronic components
Items Needed: SC8e

R/C 2-channel surface frequency radio system
Batteries:
qty 1 or 2 6-cell NiMH type packs (7.4v)OR
qty 1 or 2 2-cell LiPo type packs (7.4v, 11.1v, or 14.4v, depending on the compatibility of the speed control)
Note: if running LiPo, the charger and speed control have to be LiPo compatible.
Battery charger (peak detection charger recommended)
Electronic speed control
R/C electric motor
Tire adhesive
Paint for Lexan body
Tools: Phillips screwdriver, needlenose pliers, pencil-type soldering iron with Rosin core solder to solder motor wires, thread-locking compound, hobby knife, precision ruler, body scissors.
作者: fr888    時間: 2011-10-20 03:02
回復 coolcooleric 的帖子

自製SC8e FT like me:
RC8 FT + Tekno RC8T conversion kit + SC8 Tower/Bumpers/Roll Cage/Body
Total around USD700!
作者: Marksman    時間: 2011-10-20 13:47
Cool C Hing, I ordered one Losi SCTe kit and should arrive on 28th but I will not open it until I have time, if you still cannot get one in this peroid perhaps you can take my one first.
作者: coolcooleric    時間: 2011-10-20 14:39
回復 Marksman 的帖子

Thx ching! 不過唔係幾好意思!
如果要等得耐更加唔好意思攞你個架啦!

作者: Marksman    時間: 2011-10-20 15:49
>>>ikesan  how much ah? mark gou!<<<
The shop told me about $23XX, price will know when the goods arrive on 28th Oct.

Cool Hing, doesn't matter, just a toy for us (toy r us ), I just found I don't have enough time to finish so many projects Perhaps it is good for me to go with the RTR later.
作者: Marksman    時間: 2011-10-20 15:51
>>>22年  Such a generous gentleman!! Thumbs-up!!! <<<

You welcome
作者: coolcooleric    時間: 2011-10-20 16:04
回復 Marksman 的帖子

Thx Ching very much . Actually I'll go Kws and ask for details for scte, so if my friend can't wait any more , then I'll b contact you!

For me , I'm buy dex210 first then I'll buy a sc! Would there be any new sc coming ?
作者: Marksman    時間: 2011-10-20 16:11
回復 coolcooleric 的帖子

No problem, just take it easy.

I also want a 2wd, it is in my wish list. Once I complete my RC8.2, I will decide on what new project go next.

1/10 2wd truggy or buggy
1/10 SC
1/8 truggy
作者: Marksman    時間: 2011-10-20 17:10
>>>22年  1/8 truggy.............My RC8Te is waiting for companion<<<

Good ar, then I switch this to the next project then
作者: Marksman    時間: 2011-10-20 17:54
>>>jf813  Good man!!!!!! BTW: Going to MX this weekend? Think the TRC guys are going on Sunday.<<<

I will go mx on this Sunday
作者: fr888    時間: 2011-10-20 18:53
Marksman 發表於 2011-10-20 17:10
>>>22年  1/8 truggy.............My RC8Te is waiting for companion

Can Race w/ my SC8Te also
作者: MR.TAMIYA    時間: 2011-10-20 19:03
Speed passion V2.0 Pro + Noavk Ballistic 5.5t 550
550 13T pinion gear
作者: Marksman    時間: 2011-10-20 20:07
本帖最後由 Marksman 於 2011-10-20 20:09 編輯

>>>euro614  Mark哥,星期日先去?我地車隊星期六去喎。<<<

Euro 兄, 架大車要換避震所以順便在家開始砌架8.2 羅, 可能要下星期六先 join 到大隊了.

除非架車攞得早, 咁星期六下午都有幾會入的.

作者: Marksman    時間: 2011-10-21 07:59
當然唔系啦,支shocks夠斯換了
作者: ikesan    時間: 2011-10-21 08:19
Marksman 發表於 2011-10-21 07:59
當然唔系啦,支shocks夠斯換了

Mark哥,橫掂都換,叫師傅換4支長d嘅!入級都舒服d la!
作者: jf813    時間: 2011-10-21 09:40
回復 ikesan 的帖子

ya, increase the ride height and I am sure you will be the fastest guy to get to MX Club man.  
作者: Marksman    時間: 2011-10-21 09:41
ikesan 發表於 2011-10-21 08:19
Mark哥,橫掂都換,叫師傅換4支長d嘅!入級都舒服d la!

Can use damper with air bump to raise up the chassis ....... just afraid the air bump will activated accidentally while the car touring in 200kph+
作者: Marksman    時間: 2011-10-21 11:54
Pending this one coming


                               
登錄/註冊後可看大圖

作者: smlming    時間: 2011-10-21 22:42
22兄,上個星期曰你玩AE 果部SC呀,部車快過D油車,有睇我地D片就知
作者: coolcooleric    時間: 2011-10-23 13:59
係邊度可以買/訂Tekin RX8 + Pro4 4600/4000 ???

作者: coolcooleric    時間: 2011-10-23 15:13
MR.TAMIYA ching
so ,where can i buy Speed passion V2.0 Pro + Noavk Ballistic 5.5t 550 ?

作者: MR.TAMIYA    時間: 2011-10-23 15:14
回復 coolcooleric 的帖子

KWS or Amain hobby




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2