RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: BLS 352好定ORION既VDS-2612HV好??? [打印本頁]

作者: luntao 時間: 2011-8-16 08:52
標題: BLS 352好定ORION既VDS-2612HV好???
本帖最後由 luntao 於 2011-8-16 08:54 編輯

BLS 352
Speed:0.15sec/60° (at 6.0V)
Torque:18.0kg．cm (at 6.0V)

VDS-2612 HV
Speed: 0.12 sec/60°
Torque: 362 oz/in (26 kg/cm)

一隻就大力D又快D又便D,不過未用過ORION D SERVO
一隻出名野,行無刷,用過351,唔錯,不過好(肯)貴,有無C兄俾D意見,用黎轉向

作者: ozone 時間: 2011-8-16 10:54
本帖最後由 ozone 於 2011-8-16 14:55 編輯

Hitec HS-7945TH    Titanium Gear Train (MK first gear)
Speed (6.0V/7.4V):       0.12 / 0.10 second @ 60°
Torque oz./in. (6.0V/7.4V):       250 / 319
Torque kg./cm. (6.0V/7.4V):       18.0 / 23.0

Hitec HS-7954SH Steel Gear Servo
Speed (6.0V/7.4V):       0.15 / 0.12
Torque oz./in. (6.0V/7.4V):       333 / 403
Torque kg./cm. (6.0V/7.4V):       24.0 / 29.0
Spare Parts

Hitec HS-7980TH Titanium Gear Servo
Speed (6.0V/7.4V):       0.20 / 0.17
Torque oz./in. (6.0V/7.4V):       500 / 611
Torque kg./cm. (6.0V/7.4V):       38.0 / 46.0

HS-M7990TH Mega Torque HV Magnetic Encoder Servo    Titanium Gear Train (MK first gear)
Speed (6.0V/7.4V):       0.20 / 0.17
Torque oz./in. (6.0V/7.4V):       500 / 611
Torque kg./cm. (6.0V/7.4V):       36 / 44

作者: hk_sdu 時間: 2011-8-16 11:59
BLS 451
10.6kg
0.01sec
below $700
i am using on 1:8 轉向, good enough

0.15 sec too slow

作者: luntao 時間: 2011-8-16 12:06
HITEC 好用D???
Hitec HS-7954SH Steel Gear Servo
Speed (6.0V/7.4V):       0.15 / 0.12
Torque oz./in. (6.0V/7.4V):       333 / 403
Torque kg./cm. (6.0V/7.4V):       24.0 / 29.0
Spare Parts•55321 - Gear Set
•55414 - Case Set

依隻好似唔錯

作者: hk_sdu 時間: 2011-8-16 12:31
24kg is mostly aim for 1:8 buggy
Futaba is very reliable with reasonable price

Hitec, no comment.
Or u can choose Savox with better price

作者: coronafans 時間: 2011-8-17 18:06
Savox 1256 !!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)