RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 避震彈弓及toe out問題! 已更新 [打印本頁]

作者: mathew97726    時間: 2011-8-15 21:50
標題: 避震彈弓及toe out問題! 已更新
本帖最後由 mathew97726 於 2011-8-16 12:20 編輯

咁多位CHing真係唔好意思 我又要開post
但真係有野問 今次會虛心d聽大家講...
我想問 如果買油壓彈弓 我係JV玩
TT-01 nimh電 應該個彈弓配搭係點? 同埋建議買邊隻彈弓好(tamiya定3racing)? 因為我用緊3racing油壓同3racing枝油壓跟埋既彈弓 但枝彈弓太長 set唔到 所以聽日會出去買 想問我應該買咩彈弓同係長定短? 已爬文 但好多篇都是最後無講買邊隻...
~~~~~~~~~~~~~
另外問埋Toe out!
如果車頭要set toe out
點知應該set toe out幾多? 係咪要自已慢慢試? 有無d咩參考系數?
THX A lot!
請各CHing幫幫忙
~~~~~~~~~~~~~~~~~~
又有新問題!
咁set車高應該幾高? for jv thx!

作者: 車仔同學會    時間: 2011-8-15 21:57
師父應該買套HUDY set車架XD
你個四支3racing油壓應該係用長彈弓...
作者: truckman    時間: 2011-8-15 21:58
回復 mathew97726 的帖子

不用怕open post 係free
作者: mathew97726    時間: 2011-8-15 22:02
truckman 發表於 2011-8-15 21:58
回復 mathew97726 的帖子

不用怕open post 係free

有CHing不喜歡我不斷開post... 所以會避免開post
作者: jerwin123    時間: 2011-8-15 22:02
本帖最後由 jerwin123 於 2011-8-15 22:04 編輯

toe-out 1 or 1.5先啦, 想架車定d就慢慢加

作者: mathew97726    時間: 2011-8-15 22:02
車仔同學會 發表於 2011-8-15 21:57
師父應該買套HUDY set車架XD
你個四支3racing油壓應該係用長彈弓...

係用長彈弓架咩CHing?
作者: alan0108    時間: 2011-8-15 22:04
jerwin123 發表於 2011-8-15 22:02
toe-out 1 or 1.5先啦, 想架車定d就慢慢加, 太推就減
你係咪買錯左3racing sakura zero油壓呀, 佢係短左架

佢買果隻系籃色架, zero/s 佢地系用粉紅色架
作者: Tam    時間: 2011-8-15 22:06
本帖最後由 Tam 於 2011-8-15 22:07 編輯

3racing 彈簧手工不好長短不一, tamiya touring 彈簧好好多. 一set $65試到arm為止. toe out可以試. 一般0.5-1.5度. 如果要知幾度,要買set車架. 不過我都沒有買, 調兩三次試一下就知道最好setting

作者: 車仔同學會    時間: 2011-8-15 22:08
mathew97726 發表於 2011-8-15 22:02
係用長彈弓架咩CHing?

不如你打你個套油壓既型號出黎, 3racing有好多油壓產品
作者: mathew97726    時間: 2011-8-15 22:12
車仔同學會 發表於 2011-8-15 22:08
不如你打你個套油壓既型號出黎, 3racing有好多油壓產品

死啦...枝油壓no.......我要搵搵... sorry thx!
作者: 車仔同學會    時間: 2011-8-15 22:22
mathew97726 發表於 2011-8-15 22:12
死啦...枝油壓no.......我要搵搵... sorry thx!

咁影相....
作者: mathew97726    時間: 2011-8-15 22:34
車仔同學會 發表於 2011-8-15 22:22
咁影相....

http://hk.3racing.hk/products.php?products_key=3997
呢枝
作者: 車仔同學會    時間: 2011-8-15 22:36
mathew97726 發表於 2011-8-15 22:34
http://hk.3racing.hk/products.php?products_key=3997
呢枝

好似係長彈弓
四支油壓係你自己砌?
作者: mathew97726    時間: 2011-8-15 22:39
車仔同學會 發表於 2011-8-15 22:36
好似係長彈弓
四支油壓係你自己砌?

係自已砌呀! 但係...長彈弓牙...或者我出去問問啦 thx
作者: 車仔同學會    時間: 2011-8-15 22:45

你d油壓好多氣
作者: mathew97726    時間: 2011-8-15 23:20
車仔同學會 發表於 2011-8-15 22:45

你d油壓好多氣

係!?
作者: Allan007    時間: 2011-8-15 23:38
mathew97726 發表於 2011-8-15 23:20
係!?

要買呢樣野
http://www.tamiyausa.com/product/item.php?product-id=54152
作者: mathew97726    時間: 2011-8-15 23:43
Allan007 發表於 2011-8-15 23:38
要買呢樣野
http://www.tamiyausa.com/product/item.php?product-id=54152

好貴...
作者: Allan007    時間: 2011-8-15 23:55
mathew97726 發表於 2011-8-15 23:43
好貴...

我用緊呢套
http://www.rcmart.com/catalog/rc ... emover-p-33224.html
作者: fatchickterian    時間: 2011-8-16 09:55
回復 mathew97726 的帖子

Use Tamiya TRF short springs la!!

Front white with blue dot,

Rear white with yellow dot,

if you have enough money buy the spring set to try different combo!!

Toe use 0.5 - 1.5 (as other c-hing have said)
作者: fatchickterian    時間: 2011-8-16 09:57
Also if you don't want to by the air pump tool, just leave the shock open for overnight, it will help reduce the air!!




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2