RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 室內機仔人仕請進 [打印本頁]

作者: tat1010 時間: 2011-8-7 20:28
標題: 室內機仔人仕請進
本人玩緊CB100..........大家認為下一部機仔應該出邊部?.....
主要都會唸番華記
4#6B ? .... 上六通? or 其他?

作者: tat1010 時間: 2011-8-7 20:36
回復 tat1010 的帖子

OR V100D01 ?

作者: wave 時間: 2011-8-7 21:25
戶內定戶外？

作者: tat1010 時間: 2011-8-7 21:29
室內

作者: wave 時間: 2011-8-7 22:45
冇副翼係列

作者: only 時間: 2011-8-8 19:53
本帖最後由 only 於 2011-8-8 19:58 編輯

tat1010 發表於 2011-8-7 21:29

登錄/註冊後可看大圖

室內

我推薦你玩 E-Flite Blade msR
反應快, 又耐摔

http://www.youtube.com/watch?v=zp9jDCYPMWc

玩 6ch 前, 需練 '模擬器', 我也在練習中

作者: wave 時間: 2011-8-8 20:57

only 發表於 2011-8-8 19:53

登錄/註冊後可看大圖

我推薦你玩 E-Flite Blade msR
反應快, 又耐摔

準備升呢

作者: only 時間: 2011-8-8 21:11

wave 發表於 2011-8-8 20:57

登錄/註冊後可看大圖

準備升呢

起碼練熟 cup 機 4 面懸停先

作者: wave 時間: 2011-8-8 21:46

only 發表於 2011-8-8 21:11

登錄/註冊後可看大圖

起碼練熟 cup 機 4 面懸停先

ching 6ch未上手就諗住cup先果然有大志

作者: only 時間: 2011-8-8 21:56
本帖最後由 only 於 2011-8-8 22:00 編輯

wave 發表於 2011-8-8 21:46

登錄/註冊後可看大圖

ching 6ch未上手就諗住cup先果然有大志

我只係練 PhoenixRC, 暫時只可 cup 機對頭懸停

作者: willy228 時間: 2011-8-9 13:55
MCPX is the way to go....

作者: tat1010 時間: 2011-8-9 19:38
MCPX? 係咩?

作者: only 時間: 2011-8-9 20:16

tat1010 發表於 2011-8-9 19:38

登錄/註冊後可看大圖

MCPX? 係咩?

登錄/註冊後可看大圖

mcpx 是一台很輕巧的 6ch 細機

http://www.youtube.com/watch?v=CjBsmZRstcs

http://www.bladehelis.com/Products/Default.aspx?ProdId=BLH3500

作者: samho2088 時間: 2011-8-10 00:37
本帖最後由 samho2088 於 2011-8-10 00:37 編輯

回復 only 的帖子

呢部野現代有得賣，1330蚊，but 唔知係唔係全套

作者: Dsikk 時間: 2011-8-10 10:34
mcpx,,but it is using brushed motor,,,,

作者: rudy6183 時間: 2011-8-10 15:44
回復 tat1010 的帖子

細機再升就只有向難度挑戰, 上6動或可先玩無副翼嘅機先.
試吓Walkera 部 V100D06 (無副翼6通機, 但係用有擦摩打)

作者: f6f 時間: 2011-8-10 16:05
我建議上450 size, 最主要原因零件較平.

作者: wave 時間: 2011-8-10 18:49

rudy6183 發表於 2011-8-10 15:44

登錄/註冊後可看大圖

回復 tat1010 的帖子

細機再升就只有向難度挑戰, 上6動或可先玩無副翼嘅機先.

ching V100D06 係4通机黎架......

作者: hele 時間: 2011-8-10 19:16
better to start with 450 - better handling for beginners.

作者: rudy6183 時間: 2011-8-10 20:13
Sorry 寫錯咗應該係V100D08

作者: tat1010 時間: 2011-8-10 22:38
450太大....成日要出街放先好玩.........可能會玩多一兩部機仔先上450........
v100d01 有師兄玩過?.......

作者: shungyan 時間: 2011-8-11 00:54
Hi tat1010 Ching,

Let me share my experience.
I bought a m120d01 around 2 months ago. I enjoy it a lot and fly 3 packs of battery each day. But I spent about 2k for parts now!

2X cannopy (34 each) 68
1X pairs of main blade (HKD 22 each) ~300
6 main shaft (HKD25 each) ~ 150
6 main gear (HKD 33 each) ~ 200
5 feature shaft (HKD22 each) ~ 110
1 tail boom (HKD 60) 60
1 cyclic servo (HKD 80) 80
1 tail servo (HKD 80) 80
1 ESC (This one is accident actually. My fault) (hkd 120) 120
1 pair of tail blade (HKD 17) 17
1 bag of screw (HKD 32) 32
1 set of rotor head (HKD 100) 100
1 set of swashplate (HKD 48) 48
1 set of linkage (HKD 22) 22
1 set of tail boom holder (HKD 22) 22
1 set of metal frame (HKD 25)

All are not spare parts. They are those I consumed! I now have around 700 spare parts on hand!!
I agree walkera's small heli is good looking and fun. But the parts is really expensive. FYI, main shaft for a 450 size heli (tarot) is around 10 RMB .... for 3!

It you can, buy a clone of align trex 450 (tarot) and a MCP-x (choose the one with spektrum dx6i). Then you can have indoor fun and a real good outdoor heli. According to other heli ching, a clone is ok for a 450 size rc heli. It is heard that Tarot make good clone of align trex 450. They have combo as well!!! BTW, I plan to have a 450 as well!

Cheers!

作者: tat1010 時間: 2011-8-11 21:12
回復 shungyan 的帖子

thanks a lot .....
我會好好考慮。
其實我都係問定各位師兄既路程經驗。唔想浪費金錢買錯機行錯路。

作者: shungyan 時間: 2011-8-11 22:25
I think there is no wrong or right. But it needs to think twice. 450 size has its own fun and 120 size has it own unique feature. The only thing I complain about my m120d01 is parts are too expensive compare with 450 clone. But the main reason is there is no clone parts for such small size rc heli. If it has, I will never consider bigger size rc heli at this moment

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)