RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Savage Flux 同好召集~ (如何改成山寨版Baja) [打印本頁]

作者: iggihk 時間: 2011-5-30 10:33
標題: Savage Flux 同好召集~ (如何改成山寨版Baja)
本帖最後由 iggihk 於 2011-6-15 11:48 編輯

各位師兄, 小弟最近受魔鬼引誘入左部 Savage Flux, 經過成個月的等待已經變身成為山寨版 Baja 5b la
Parts needed:

Wheel hub to mount Baja Wheel

http://www.hpiracing.com/products/en/102530/

Wide Axle

http://www.hpiracing.com/products/en/86249/

Conversion

http://www.tcscrawlers.com/TCS-Flux-5T-conversion-kit-p-17912.html

How to use Baja Shocks

http://www.rccoh.com/rc.how-to/savage.5b.shockmod.html

作者: iggihk 時間: 2011-5-30 10:44
請問有無師兄試過淘寶隻 A123 8000mah 呢?

系KWS睇左好耐都無岩心水 11.1 Lipo... 一系太貴,一系唔夠Mah

作者: fr888 時間: 2011-5-30 11:07
Wah what parts are needed to upgrade flux to baja?

作者: rover901 時間: 2011-5-30 17:03
nice!

handles as good as a buggy?

作者: iggihk 時間: 2011-5-31 10:28
Too bad I have never had a buggy before... so I am not sure if it handles as well as a buggy...

I tried it out last time, and the off-road performance is excellent compare with Slash 4x4.

Let me edit my post and list the parts needed for the conversion.

作者: fr888 時間: 2011-5-31 10:35
ching does your motor/esc has enough power? I have a hobbywing 1/5 esc/motor combo too powerful which keep stripping my 8ight-T rear diff...

作者: iggihk 時間: 2011-5-31 14:10
The motor and esc is powerful enough for me.

It is actually a mamba monster 2200 kv combo, but branded as HPI Blur~

I change the pinion and spur gear to 15 / 44 due to the extra weight (stock is 22/44)

作者: fr888 時間: 2011-5-31 15:19
回復 iggihk 的帖子

you use 6s?

作者: iggihk 時間: 2011-5-31 16:35
I use 4 cell only, but i was play it on a very low traction surface.

As I said on the previous post, i couldn't find a 3 cell lipo that fits my need

作者: fr888 時間: 2011-6-1 00:44
回復 iggihk 的帖子

I just got a By 4500 45c for my fazer ep $4xx so far so good

作者: bennyberserk 時間: 2011-6-1 01:38
本帖最後由 bennyberserk 於 2011-6-1 01:48 編輯

i am using 25c 3s 3300 ip battery product around 350 per one
and my flux hp do backflip easily . the main problem on this car is the 17mm hex and nuts on rear right always get lose = =
i hate it so much and i want this staff to fix the original problem ! http://item.taobao.com/item.htm?id=9291822861
but they keep out of stock SO BAD!

作者: DK666 時間: 2011-6-1 15:29
回復 iggihk 的帖子

It is actually a mamba monster max 2200 kv combo, not mamba monster 2200 kv combo. and handles as good as a buggy if you ask me, cause I AM THE DEVIL/SATAN/魔鬼 that iggihk mentioned.....one thing was that he lost his pinion gear set screw within 5 minutes, and i broke the rear right shock within 10 minutes.....but still that was fun back there! DUST LIKE HELL, WET LIKE HELL, AND CLEAN LIKE HELL after we finished! now, i'm still waiting for free time to clean the 5t again...

作者: iggihk 時間: 2011-6-1 19:39
You should use your free time to play it instead of cleanning it

作者: DK666 時間: 2011-6-2 22:34
回復 iggihk 的帖子

you better be careful next time cause I'LL DO THE YOU JUMP I JUMP STYLE to you!!!

作者: bennyberserk 時間: 2011-6-2 23:56
one thing i bought this flux hp, because standing backflip. so if i change to 24mm hex hub and use 5B tires . can i still do a backfilp?

作者: iggihk 時間: 2011-6-3 17:33
回復 bennyberserk 的帖子

there is no way you can do stand still back flip after the conversion...

作者: bennyberserk 時間: 2011-6-3 22:08
so i won't converse on it hehe. i like its original look and good on these tire. AND I HATE THE {banned}ING WHEEL HEX NUTS of the original but as i said NO 24mm but i want this http://item.taobao.com/item.htm?id=9291822861& BUT OUT OF STOCK BECAUSE THE FACTORY MAYBE GONE !!! OMG PLEASE ANYONE CAN HELP FOR CUSTOM SOMETHING LIKE THIS SO I CAN GET THE ORIGINAL TO RUBBISH BIN ! THANK YOU!!!!

作者: iggihk 時間: 2011-6-4 00:13
I have a set of tires for sell... 100% new also, pm me if your are interested.

Where do you play your Savage?

作者: bennyberserk 時間: 2011-6-5 01:29
本帖最後由 bennyberserk 於 2011-6-5 01:30 編輯

i am thinking should i bring my flux to MXClub. well actrally i am a newbie

just got it few months still finding bugs from the flux. backflip . frontflip !~ let me show u the video !
http://www.youtube.com/user/SavageJunky#p/u/2/wapIo0KiVzY this call a JUMP?????????
http://www.youtube.com/user/SavageJunky#p/u/1/zzlr6U3NwB8 this call SKILL?????
http://www.youtube.com/user/SavageJunky#p/u/0/Pynm-2MAmc4 this call protection
good advice for newbie fluxer ! pls prepare like this before flux like him @@

作者: iggihk 時間: 2011-6-6 14:12
D片好正wor!

Ching通常去邊到玩ar?

作者: bennyberserk 時間: 2011-6-6 20:18
係紅磡海濱南岸屋院放貨區和後面Ｄ天橋底玩咋
三座大廈咁長的放貨區加有蓋但無貨又無人但要住客先入得靚地現在一人練習無人打搞
海濱南岸後有２條合併高速天橋底有公園仔有陰旁邊有條行人路又係勁長無人行又直用來試速度正！
但我最想去mxclub 老婆唔放人慘！

作者: iggihk 時間: 2011-6-6 20:56
請問系沙地定系on road?

MX Club D Ching話好污糟... 我就系掃管忽玩沙地

作者: bennyberserk 時間: 2011-6-6 22:13
加唔到你做朋友 msg{你目前沒有權限進行此操作點這裡查看權限}
行人路來的紅磚地

掃管忽玩沙地係邊？

作者: iggihk 時間: 2011-6-11 00:46
It is at the entrance of the 掃管忽village, right next to the construction site.

作者: iggihk 時間: 2011-6-15 11:47
唔通無咩人玩Savage Flux?

作者: DK666 時間: 2011-6-15 12:36
回復 iggihk 的帖子

Of Course

.....SATAN,SATAN,SATAN,SATAN,SATAN,SATAN

作者: waiwaiyick 時間: 2011-6-15 12:47
唔係無,過成五仟幾蚊好多人唔捨得姐.

作者: DK666 時間: 2011-6-15 12:51
回復 waiwaiyick 的帖子

c兄,你去好快捷買呀?HK$5xxx????我喺Tower Hobbies連shipping都係4中左右

作者: bennyberserk 時間: 2011-6-15 19:16
here really less ppl play maybe :O

作者: du0449 時間: 2011-6-15 20:31

iggihk 發表於 2011-6-6 20:56

登錄/註冊後可看大圖

請問系沙地定系on road?

MX Club D Ching話好污糟... 我就系掃管忽玩沙地

師兄掃管忽咩位置呀？係咪黃金右轉呀？

作者: iggihk 時間: 2011-6-15 23:10
本帖最後由 iggihk 於 2011-6-15 23:13 編輯

du0449 發表於 2011-6-15 20:31

登錄/註冊後可看大圖

師兄掃管忽咩位置呀？係咪黃金右轉呀？

Google Earth
22°22'33.34"北
114° 0'15.12"東
Google Map
22.375980, 114.004137

作者: little-car 時間: 2011-6-15 23:40

DK666 發表於 2011-6-15 12:51

登錄/註冊後可看大圖

回復 waiwaiyick 的帖子

c兄,你去好快捷買呀?HK$5xxx????我喺Tower Hobbies連shipping都係4中左右

D 匯率點計??

作者: bennyberserk 時間: 2011-6-15 23:44
本帖最後由 bennyberserk 於 2011-6-15 23:48 編輯

far far away

i am at east u at west

作者: iggihk 時間: 2011-6-15 23:48

little-car 發表於 2011-6-15 23:40

登錄/註冊後可看大圖

D 匯率點計??

美金對港元都走唔甩7.7-7.8 ga la

作者: bennyberserk 時間: 2011-6-15 23:56
本帖最後由 bennyberserk 於 2011-6-15 23:59 編輯

www.taobao.com have hpi savage flux 4050 RMB but don't trust so much.........
but take a look of other parts is good. there alwyas have stock. i buy these 17mm hex and nuts custom by mainland factory. i will have it real soon .when i get it. i will post report later

http://item.taobao.com/item.htm?id=10692025822
i wish this thing can fix my wheels comming off problem hehe

作者: little-car 時間: 2011-6-16 00:05

iggihk 發表於 2011-6-15 23:48

登錄/註冊後可看大圖

美金對港元都走唔甩7.7-7.8 ga la

paypal 有時用 d exchange rate 好高的, 可能高過 7.8

作者: bennyberserk 時間: 2011-6-16 00:15
HK to RMB is high rate too . if u buy taobao point from OK

作者: bennyberserk 時間: 2011-6-21 11:32
本帖最後由 bennyberserk 於 2011-6-22 12:28 編輯

套17mm hex and double nuts 終於到手!多謝祖國同包設計解決我的飛輪問題!!

作者: DK666 時間: 2011-6-21 12:12
回復 bennyberserk 的帖子

looks GOOD! how much is it with S&H to HK? and how's the material, good?

作者: bennyberserk 時間: 2011-6-21 12:17
full set aluminum with purple paint . 248RMB 15RMB to HK from Taobao
better than the FKing original hex and nuts !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

HPI need to learn this for MOnster POwer Car!!!!!!!!!

作者: DK666 時間: 2011-6-22 10:46
回復 bennyberserk 的帖子

thx, bro!

作者: bennyberserk 時間: 2011-6-22 12:04
回復 DK666 的帖子

我前面的post有賣此貨的link慢慢睇

作者: iggihk 時間: 2011-7-13 13:42
不如約出來一齊玩?

作者: MR.TAMIYA 時間: 2011-7-13 15:09
本帖最後由 MR.TAMIYA 於 2011-7-13 17:07 編輯

約局--7月16日大比例越野車 MX-Club 聚會

http://bbs.rc-evo.com/forum.php? ... 2826&extra=page%3D1

作者: bennyberserk 時間: 2011-7-26 18:50
http://www.youtube.com/watch?v=2606UHDOnCk
Backflip Alone at basketball Playground T.T
http://www.youtube.com/watch?v=-esdDBd29J0
And the Grass Child Playground T.T

作者: iggihk 時間: 2011-7-27 12:03
Can we come and play on the grass filed?

作者: bennyberserk 時間: 2011-7-27 18:00
when u free? i send message to u lol
but i am not sure the guard will force us leave

if too much big car kakaka

作者: qinglengql 時間: 2011-7-28 12:58
加長之後，玩法反到收到限制，空翻難度增加。不過很心情，很帥。

作者: qinglengql 時間: 2011-7-28 13:37
這裡能看到情人設計的龍爪接合器，卻看到青冷設計的SAVAGE防滾架，可惜了。給大家看看我設計的防滾架，哈哈
[attach]518969[/attach][attach]518970[/attach][attach]518971[/attach][attach]518972[/attach][attach]518973[/attach][attach]518974[/attach][attach]518975[/attach][attach]518976[/attach][attach]518977[/attach][attach]518978[/attach][attach]518979[/attach][attach]518980[/attach][attach]518981[/attach][attach]518982[/attach]

作者: iggihk 時間: 2011-7-28 16:26
這個跳台一級棒!!

作者: qinglengql 時間: 2011-7-28 16:34
回復 iggihk 的帖子

非常適合飛躍的弧度坡面，可折叠，可調坡面角度，坡面無凸起物，坡面透明，哈哈！只做了一個，就被本地人霸佔走了

作者: siboy 時間: 2011-7-29 11:16
邊度既草地玩架, 好正喎

作者: DK666 時間: 2011-7-30 11:18
回復 qinglengql 的帖子

Hi C-Hing, how much is the R/C Jump??? I want to get one! THX.

作者: qinglengql 時間: 2011-8-1 10:15

DK666 發表於 2011-7-30 11:18

登錄/註冊後可看大圖

回復 qinglengql 的帖子

Hi C-Hing, how much is the R/C Jump??? I want to get one! THX.

跳臺暫時還沒發售，等秋天可能會做幾個玩玩。到時再關注，謝謝你！

作者: waiwaiyick 時間: 2011-8-2 15:11
師兄唔識上綱買呀?請問在那裡可以四仟幾買到。

作者: iggihk 時間: 2011-8-2 16:32

waiwaiyick 發表於 2011-8-2 15:11

登錄/註冊後可看大圖

師兄唔識上綱買呀?請問在那裡可以四仟幾買到。

請問師兄你想表達什麼?

作者: bennyberserk 時間: 2011-8-2 19:14
我諗佢想講四千幾買架車

iggi when come out play . any stand jump bring out play lol

作者: waiwaiyick 時間: 2011-8-2 20:15
對呀ching!

作者: iggihk 時間: 2011-8-2 21:02
I want to come out and play with you, but I am very busy until the end of the month~

作者: iggihk 時間: 2011-8-2 21:07
回復 waiwaiyick 的帖子

唔識上網買的話你可以到快x買現貨.

加長組件一定要上網買的

作者: chiimann 時間: 2011-8-9 08:21
超正!不過要找到個好地方玩比較難

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)