speedpassiongtesc1-1.jpg (44.39 KB, 下載次數: 34)
2011-5-25 04:19 上傳
pls,can tel me speed passion GT 1.1v esc have turbo mod? this can use 4.0T motor?.............thx作者: hardmankam 時間: 2011-5-25 08:43
no turbo, this model cannot use 4.0T.
作者: buzzybee82 時間: 2011-5-25 10:36
Speed Passion crossover Hobbywing??
haha....interest.....looks like 老翻 to me
作者: hardmankam 時間: 2011-5-25 11:08
This is not 老翻.
This esc is called the Speed Passion LPF, designed to have a shorter heat sink, with no fan, designed to used in 1/12 pan cars. But the motor limit is about 5.5r to 6.5r for 2cell lipo.
作者: buzzybee82 時間: 2011-5-25 12:18
hardmankam 發表於 2011-5-25 11:08
This is not 老翻.
This esc is called the Speed Passion LPF, designed to have a shorter heat sink, ...
so is this make by Speed Passion? or Hobbywing? or another brand?作者: kkchung 時間: 2011-5-25 12:35
兩公司合作關係，Speed Passion特別版的Hobbywing電變。
作者: st_kuen 時間: 2011-5-25 13:35
回復 hardmankam 的帖子
How about for speed passion GT Version 2.0 carbon LPF ? Turbo mode available or not?
Thanks!
作者: t3lover 時間: 2011-5-25 13:49
回復 st_kuen 的帖子
No. LPF no turbo mode.
Go for Ver 2.1 for turbo.
作者: RCK 時間: 2011-5-25 13:51
ihave esc is like photo but not a LPF,is GT 1.1ver have turbo mod? can use 4.0T motor ?
作者: t3lover 時間: 2011-5-25 14:01
回復 RCK 的帖子
Stock turbo + 4.0T may burn down ESC/motor.
be careful on yr setting..... better play with modified mode on 4T motor....
作者: RCK 時間: 2011-5-25 14:05
thx......i just to know this esc have or not have? can or can't ?
作者: lung1 時間: 2011-5-25 14:39
本帖最後由 lung1 於 2011-5-25 15:35 編輯
GT2.0 LPF 係可以用到TURBO MODE 的(但要update firmware)
作者: lung1 時間: 2011-5-25 14:40
GT2.0 LPF (60A) & PRO(120A) 都可以update firmware, 只有舊款ver1.1 先無得update..
作者: lung1 時間: 2011-5-25 14:41
RCK 發表於 2011-5-25 13:51
ihave esc is like photo but not a LPF,is GT 1.1ver have turbo mod? can use 4.0T motor ?
GT ver1.1 係無turbo ...
作者: st_kuen 時間: 2011-5-25 15:03
回復 lung1 的帖子
Lung1 c-hing,
For my speed passion GT Version 2.0 carbon LPF, may I know how to update firmware for tubo mode ?
Many thanks!
作者: lung1 時間: 2011-5-25 15:28
本帖最後由 lung1 於 2011-5-25 15:32 編輯
去買個hobbywing既program box(150$)用作update firmware,
跟住上hobbywing網站download 返個software, 再將d線駁返去適當既位置就可update...
hobbwing 有好多唔同既firmware 提供, 有d 係for stock (有turbo /無turbo),有d係 for modify (有turbo /無turbo)
詳情請睇manual先...
作者: RCK 時間: 2011-5-25 16:00
c hing said 1.1ver no update firmware ,but i see progame card use for it why?
作者: st_kuen 時間: 2011-5-25 16:45
回復 lung1 的帖子
Lung1 c-hing,
Thanks for your advice.
作者: hardmankam 時間: 2011-5-25 19:01
本帖最後由 hardmankam 於 2011-5-25 19:02 編輯
回復 RCK 的帖子
Here is the summary for Hobbywing & SP:
* Version 1.0/1.1 cannot upgrade firmware.
* Version 2.0/2.1 can use turbo mode. (after firmware update)
* Each version has 60A and 120A versions.
* SP's 60A is called the LPF version
* 60A max is 5.5T (w/o turbo)
* 120A max is 3.5T (w/o turbo)
* With turbo, you will need to regear and use a higher turn motor.
* The program card is to change parameters within the ESC (like brakes, punch etc...) it does not mean it can use turbo.
If there are more questions, please ask.
作者: RCK 時間: 2011-5-25 19:08
can tel me 1.1ver is how many A out pull ? can use how turn motor ?.....thx
作者: hardmankam 時間: 2011-5-25 19:23
If your v1.1 is like the first picture, then it is 60a. Max motor is about 5.5.
作者: RCK 時間: 2011-5-25 19:44
回復 hardmankam 的帖子
but not LFP
作者: hardmankam 時間: 2011-5-25 19:53
LPF is a 60a esc, so max motor is 5.5r.
作者: st_kuen 時間: 2011-5-25 23:58
Hardmankam c-hing,
Many thanks for your detail information.
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |