RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Step by step modification of the centre oil damper [打印本頁]

作者: billy86che    時間: 2011-2-7 23:30
標題: Step by step modification of the centre oil damper
本帖最後由 billy86che 於 2011-2-8 00:00 編輯

See the pictures
作者: billy86che    時間: 2011-2-7 23:34
本帖最後由 billy86che 於 2011-2-7 23:37 編輯

Photos Two
作者: billy86che    時間: 2011-2-7 23:36
Photos Three
作者: billy86che    時間: 2011-2-7 23:40
Photos Four
作者: billy86che    時間: 2011-2-7 23:43
Photos Five

This oil damper now has 2 O-rings and thus the oil won't come out so easily.
作者: d.s    時間: 2011-2-8 00:09
拜服~!!!!!!!!!
作者: 800mah    時間: 2011-2-8 00:15
maybe two orings in a row is enough for dampening, u don't need oil in that anymore
作者: billy86che    時間: 2011-2-8 00:21
maybe two orings in a row is enough for dampening, u don't need oil in that anymore
800mah 發表於 2011-2-8 00:15



Friction is not equal to dampening. I have been using this in all my MR03s. Trust me, it works better.
作者: yipking811    時間: 2011-2-8 11:14
睇你好似好易整
作者: matthew0731    時間: 2011-2-8 11:17
即係做完防止流避震油?
作者: 葉生    時間: 2011-2-8 12:10
請問油壓係邊度買? 幾錢? thx~~~
作者: billy86che    時間: 2011-2-8 12:19
回復 11# 葉生

KWS; around $80 each.
作者: Tommy_Boy    時間: 2011-2-9 04:58
老師..幫我部ovenland整埋啦
作者: 800mah    時間: 2011-2-9 09:33
老師..幫我部ovenland整埋啦
Tommy_Boy 發表於 2011-2-9 04:58



    overland 咁整要用八支油壓wor, $600你整唔整
作者: matthew0731    時間: 2011-2-9 13:07
overland 咁整要用八支油壓wor, $600你整唔整
800mah 發表於 2011-2-9 09:33



around 80蚊枝油壓
8枝都640,仲要唔洗人工咁抵xdd哈哈
比我就整啦
作者: 800mah    時間: 2011-2-9 15:33
around 80蚊枝油壓
8枝都640,仲要唔洗人工咁抵xdd哈哈
比我就整啦
matthew0731 發表於 2011-2-9 13:07


overland個套係孖裝, 平d的
但係買八支, 五百尾都走唔甩
作者: matthew0731    時間: 2011-2-9 19:25
overland個套係孖裝, 平d的
但係買八支, 五百尾都走唔甩
800mah 發表於 2011-2-9 15:33



原來係咁
作者: roypo2001    時間: 2011-2-15 03:51
嘩!!!!
咁都得??犀利!!!!
獲益良知!!!謝謝




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2