RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 415同415ms 個前後波箱一吾一樣?? [打印本頁]

作者: 丞林    時間: 2006-8-22 23:04
標題: 415同415ms 個前後波箱一吾一樣??
415同415ms 個前後波箱一吾一樣??
thanks!
作者: AMAT    時間: 2006-8-22 23:08
好似......係一樣.....好似個分別係在於MS版係用新REVERSE臂....
去到MSX先可有上下式波箱設計.
作者: 丞林    時間: 2006-8-22 23:09
原帖由 AMAT 於 2006-8-22 23:08 發表
好似......係一樣.....好似個分別係在於MS版係用新REVERSE臂....
去到MSX先可有上下式波箱設計.



ms版好像寫住ms!
係吾係??
作者: AMAT    時間: 2006-8-22 23:14
原帖由 丞林 於 2006-8-22 23:09 發表



ms版好像寫住ms!
係吾係??


我未玩過MS版.....只係玩過415同415MSX....所以我都唔敢下確實定論
作者: 丞林    時間: 2006-8-22 23:15
原帖由 AMAT 於 2006-8-22 23:14 發表


我未玩過MS版.....只係玩過415同415MSX....所以我都唔敢下確實定論



都thank you
作者: Jimmyso    時間: 2006-8-23 14:51
原帖由 丞林 於 2006-8-22 23:04 發表
415同415ms 個前後波箱一吾一樣??
thanks!

It is not the same each others !!!
作者: 丞林    時間: 2006-8-23 21:37
即是一吾一樣??
作者: AMAT    時間: 2006-8-23 21:44
原帖由 丞林 於 2006-8-23 21:37 發表
即是一吾一樣??


我都唔知......睇相啦!~哈!

TRF415

                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖



TRF415MS

                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖

作者: 丞林    時間: 2006-8-23 21:45
原帖由 AMAT 於 2006-8-23 21:44 發表


我都唔知......睇相啦!~哈!

TRF415

                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖

[img] ...



好難see
作者: AMAT    時間: 2006-8-23 21:46
睇完相O既COMMENT係......車架配件應該係唔一樣,但布局位置相信係一樣.
作者: swkchow    時間: 2006-8-23 23:18
The rear bulkheads are not the same:
1. MS has the heat sink design on the motor mount
2. MS bulkhead has more curvature at the bottom so as to give clearance to the TB4 suspension arm

The front "looks" like the same when I compare it with the 415MS manual.  Can't confirm.

But the MS marking is definitely unique.
作者: 丞林    時間: 2006-9-1 15:25
原帖由 swkchow 於 2006-8-23 23:18 發表
The rear bulkheads are not the same:
1. MS has the heat sink design on the motor mount
2. MS bulkhead has more curvature at the bottom so as to give clearance to the TB4 suspension arm

The fro ...




底板一吾一樣??
作者: SPOONACCORD    時間: 2006-9-2 00:07
係冇可能唔知家~
作者: 阿昌    時間: 2006-9-3 22:15
download 份說明圖睇吓number係吾係一樣就知啦!!
作者: swkchow    時間: 2006-9-4 22:53
415 main chassis: 3mm, MS: 2.5mm
And 415 uses 48mm suspension pin (same as TA04), MS uses 46mm => different position for the lower suspension mount.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2