RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 急!!!鋰電個平行差條線斷左 [打印本頁]

作者: 阿彥    時間: 2010-8-30 12:46
標題: 急!!!鋰電個平行差條線斷左
琴日玩車果陣發覺條線斷左,我想問而家都點焊返佢??

作者: 3pk_supra    時間: 2010-8-30 12:48
爆開個盒佢~搵返原位去焊返囉=.="
作者: Q-pet    時間: 2010-8-30 12:48
我個時都係咁..我爆散個硬殼..自己焊番佢~"~
作者: 阿彥    時間: 2010-8-30 13:00
爆完之後點??
搵膠紙痴返??
作者: Q-pet    時間: 2010-8-30 13:08
爆完之後點??
搵膠紙痴返??
阿彥 發表於 2010-8-30 13:00


個時我手工差..個殼又難爆..結果個殼我無要..
我用熱膠袋縮好排電..再出邊包膠紙
作者: 2818627    時間: 2010-8-30 18:15
個時我手工差..個殼又難爆..結果個殼我無要..
我用熱膠袋縮好排電..再出邊包膠紙
Q-pet 發表於 2010-8-30 13:08



    Q-SIR 果然好野~襟都識整~
作者: 阿彥    時間: 2010-8-30 20:07
我想問點爆開個殼?
作者: ultra7    時間: 2010-8-30 21:39
i have the same situation, but it seems ok for me to use it and charge it, no problem wor
作者: com1010hk    時間: 2010-8-30 23:38
用剪鉗開唔開到?

你果舊邊隻牌子的電??
作者: c.h.k2009    時間: 2010-8-31 03:17
小心D吳好插穿入面牙,
作者: 阿彥    時間: 2010-8-31 15:13
BY電呀=.=
作者: 天娜    時間: 2010-8-31 16:07
我之前都斷過, 好在有得換, 之後都用熱溶膠"貫"落去整死, so far 未甩過
作者: xiang    時間: 2010-9-5 03:56
If this is a BY Energy Hard Case, then you can open it by squeezing the sides together at the joints with your fingers, the sonic weld holding the case together will give way, and you will hear small cracking sounds. just work your way up and down the case.

when you have re-soldered your tab, you can use super glue to put  the case back together.
作者: hknewton    時間: 2010-9-13 00:33
be careful not to touch another terminals when soldering




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2