RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 新成員cougar sv 2wd [打印本頁]

作者: chiuchiu 時間: 2010-5-25 14:22
標題: 新成員cougar sv 2wd
本帖最後由 chiuchiu 於 2010-5-25 14:32 編輯

好毒!!!!!!!

23xx 但設計及分佈(正)!!!

作者: RCman 時間: 2010-5-25 14:55
本帖最後由 RCman 於 2010-5-25 14:56 編輯

中置2wd...的確係好正！
不過分體電有DD煩
但$23xx...真係唔貴，好過買TRF
如果換左代理...更加好

作者: chiuchiu 時間: 2010-5-25 15:22
rc man gor!
電有兩種齊法一分體3+3 另一種直放電.己包在內,唔同cat sx

作者: RCman 時間: 2010-5-25 15:24

rc man gor!
電有兩種齊法一分體3+3 另一種直放電.己包在內,唔同cat sx
chiuchiu 發表於 2010-5-25 15:22

登錄/註冊後可看大圖

甘就太好啦！好好喜歡中置motor的

作者: oolong 時間: 2010-5-25 15:26
4X4 會不會更好呢??

作者: rk2 時間: 2010-5-25 15:51
各有各好的, 2wd 也可以好好玩的....

作者: chiuchiu 時間: 2010-5-25 16:29
本帖最後由 chiuchiu 於 2010-5-25 16:33 編輯

回復／ 4# RCman

rcman gor!
我都係鐘意你新買的三呎高的鐵甲萬能俠1號多D

出面冇晒貨賣,有貨都炒貴晒!!!!

作者: RCman 時間: 2010-5-25 16:38

回復／ RCman

rcman gor!
我都係鐘意你新買的三呎高的鐵甲萬能俠1號多D出面冇晒貨 ...
chiuchiu 發表於 2010-5-25 16:29

登錄/註冊後可看大圖

多謝欣賞

我係牛頭角買，$1680
果時我同個fd每人買左一個。

作者: chiuchiu 時間: 2010-5-25 17:17
本帖最後由 chiuchiu 於 2010-5-25 17:20 編輯

回復 8# RCman
上星期買隻375mm1/48 gundam 已齊好了,下一部係Durango DEX410R,吾知幾時到貨呢
?今個月大出血啦!

作者: RCman 時間: 2010-5-25 17:20

回復 RCman
上星期買隻375mm1/48 gundam 已齊好了,下一部係dx 410,吾知幾時到貨呢?
chiuchiu 發表於 2010-5-25 17:17

登錄/註冊後可看大圖

我的1/48 gundam...5%完成度

我都唔知幾時到哦！

作者: chiuchiu 時間: 2010-5-25 17:24
回復 10# RCman
rcman gor! 去玩具版,我send D gundam photo比你see see

作者: RCman 時間: 2010-5-25 17:30
本帖最後由 RCman 於 2010-5-25 17:32 編輯

回復 RCman
rcman gor! 去玩具版,我send D gundam photo比你see see
chiuchiu 發表於 2010-5-25 17:24

登錄/註冊後可看大圖

thanks

講番部Cougar SV 2wd, 你係咪係快摺買呢？
D parts到未呀？

作者: chiuchiu 時間: 2010-5-25 17:43
回復 12# RCman

parts 更係未有啦!我遲D買多部做parts好果.分散買都幾貴

作者: rk2 時間: 2010-5-25 17:52
http://www.racing-cars.com/pp/Car_Showroom/Cougar_SV.html#
流口水中. . . .

作者: RCman 時間: 2010-5-25 17:58

流口水中. . . .
rk2 發表於 2010-5-25 17:52

登錄/註冊後可看大圖

yes,個design真係好靚......好細緻　

作者: minimini 時間: 2010-5-25 22:54
咁嘅價位...........唔算貴...........好過買部款尾嘅 Asso B4 ..........

學 chiu gor 話齋...........早買早享受............

作者: 1524 時間: 2010-5-25 23:22
期待ching o既製成品相片及試車報告~

作者: joho 時間: 2010-5-26 15:51
本帖最後由 joho 於 2010-5-26 16:00 編輯

I have just finish building mine, if anyone is interest, I have a detail building report on RCfans.

To be honest, the Cougar really is not for beginners, and there are alot of things which I think can be improve. However, it does look great!

作者: minimini 時間: 2010-5-26 16:14

I have just finish building mine, if anyone is interest, I have a detail building report on RCfans.
...
joho 發表於 2010-5-26 15:51

登錄/註冊後可看大圖

wa.........好靚嘅水晶邊...........

作者: chiuchiu 時間: 2010-5-26 16:59
回復 18# joho

joho gor!

果然快手

作者: joho 時間: 2010-5-26 18:27
I spend a week with it already, but when you build it, be very careful, there are alot of little things you need to pay attention with....

Gear Box, take your time with it.... Read my post in RCfans, I have already point out things that you need to know, hope that can help all other Cougar lovers.

作者: rk2 時間: 2010-5-27 16:22
seems the steering cover is complicated. . . but the basic geometry is same as B4 type.

作者: joho 時間: 2010-5-27 18:00
Same with B4? Far from it! The fact that it's a mid motor are already miles apart with B4.

Cougar is not the first mid-motor car, but it should be the first mid motor car that can still use a stick pack batteries right in the middle, that I guess, will be one of the selling point

作者: joho 時間: 2010-5-27 18:23
Some more photo from start to finish!

作者: hihizaza 時間: 2010-5-27 18:48
is it come with wheels and tyres!!!!like cat sx??

作者: chiuchiu 時間: 2010-5-28 08:15
回復 24# joho

JOHO GOR!
高手

作者: rk2 時間: 2010-5-28 09:04

Some more photo from start to finish!
joho 發表於 2010-5-27 18:23

登錄/註冊後可看大圖

Hi brother, I can see you only use shrink tube for (+) connection in the ESC, is there a reason not use on the (-) as well ?

作者: joho 時間: 2010-5-28 11:32

is it come with wheels and tyres!!!!like cat sx??
hihizaza 發表於 2010-5-27 18:48

登錄/註冊後可看大圖

It only come with wheels but no tyres. I actually prefer that way since I do not have to paid for things that I can't use!

作者: joho 時間: 2010-5-28 11:36

Hi brother, I can see you only use shrink tube for (+) connection in the ESC, is there a reason ...
rk2 發表於 2010-5-28 09:04

登錄/註冊後可看大圖

The reason for the shrink wrap is to avoid shorting between the + and - pole, which are sitting next to each other. So you only need to wrap one pole to avoid that, but ofcause, you can do it both to make it look nice, I am just lazy...

作者: rk2 時間: 2010-5-28 11:47
o. ic ic.

作者: tiger1 時間: 2010-5-29 07:27
I met up with a Singapore 高手 last nite and had his SX car on my. I would say, very very nice car. Complicated design but very well made. Even the body shell was very strong! For the price, it is better than B4.

作者: chiuchiu 時間: 2010-5-29 11:32
回復 31# tiger1

Tiger Gor! long time no see wor!!!!

作者: joho 時間: 2010-5-29 11:47

I met up with a Singapore 高手 last nite and had his SX car on my. I would say, very very nice car. ...
tiger1 發表於 2010-5-29 07:27

登錄/註冊後可看大圖

Tiger Ching, you are talking about the SX or the SV? SX is 4WD and SV is 2WD. Can't compare the SX with the B4 for sure

作者: raymen 時間: 2010-5-29 12:22
本帖最後由 raymen 於 2010-5-29 12:26 編輯

如果換左代理...更加好
RCman 發表於 2010-5-25 02:55 PM

登錄/註冊後可看大圖

[/quote]

Yes....
But you think another shop in KWS will keep stock ? I want it..

And I saw the front wheels are not using the Lock nuts.....screw only is tight enough ?

作者: RCman 時間: 2010-5-29 12:42

如果換左代理...更加好
RCman 發表於 2010-5-25 02:55 PM

Yes....
But you think another sh ...
raymen 發表於 2010-5-29 12:22

登錄/註冊後可看大圖

[/quote]

Front wheels Screw-in design as same as Tamiya's new TRF 2WD,
but I don't know why is better than lock nuts

作者: joho 時間: 2010-5-29 13:24
Actually if I remeber correctly, B4 are using the screw method too. Infact, the Cougar are using the same wheel type and fitting method as Associated, which personelly, I prefer the Losi type.

I can finally get to test it on my track next week, will let all C-Hing know how it actually run, I suppose the set up will need to change big time compare with the astroturf track the European are use to.

作者: tiger1 時間: 2010-5-30 07:40
Joho: I was talking about the 2WD, not the 4WD la.

Chiu Gor: long time no see too

作者: chiuchiu 時間: 2010-5-30 07:58

回復 37# tiger1

TIGER GOR! 早呀!

作者: joho 時間: 2010-6-4 12:31
Finally finish the whole car, do some testing in our track last night. With some setting change, it's getting very close to my liking, however, it will be great if Schumacher include the 4 hole piston rather then 6 hole for the rear, even with AE 45, I still think it's abit too soft...

Some photo before the testing commence, when the car are nice and clean...haha

作者: rk2 時間: 2010-6-4 23:31
it come with different color front and rear wheel .. . .

, anyway shell looks good and the paint is good as well. only the rear wheel color . .. . .

作者: PKKC 時間: 2010-7-31 09:47
how is the handling of this car, better than B4?

作者: eugene.C 時間: 2010-7-31 10:15
我台也装好了！

还欠个殼未喷好！
[attach]398588[/attach]
http://bbs.rcfans.com/thread-283313-1-2.html

作者: Bluebird 時間: 2010-8-3 22:00
What is the difference between Pro CF & Race S1?
What is your version? Joho

作者: Bluebird 時間: 2010-8-3 22:06
And also, how much of these 2 version in HK?
Thanks

作者: joho 時間: 2010-8-4 14:17

What is the difference between Pro CF & Race S1?
What is your version? Joho
Bluebird 發表於 2010-8-3 22:00

登錄/註冊後可看大圖

Pro-CF means just like that, pro kit with full carbon fiber, also come with Big bore shocks. The S1 kit is a cheaper version whick replace all carbon fiber with FRP, also come with normal shocks. If you are asking me, go to the Pro kit la, it's worth every penny of it.

I am not sure about HK price, I got mine from the China distributor.

作者: Bluebird 時間: 2010-8-8 21:43
Is there servo saver? I didn't find it on the manual.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)