標題: 火咀蝕死佐係引擎頂蓋入面點樣擰得翻出來? [打印本頁] 作者: EricRC 時間: 2010-4-1 00:24 標題: 火咀蝕死佐係引擎頂蓋入面點樣擰得翻出來? 請問各位ching, 火咀蝕死佐係引擎頂蓋入面點樣擰得翻出來? 小弟用火咀匙好大力都擰唔出來. thx作者: 清清 時間: 2010-4-1 00:37
方法都係大力擰佢出黎，支批一定要夠硬扶手加長借力擰出黎！作者: hkbananaking 時間: 2010-4-1 01:26
take the 引擎頂 out first, try to spray a bit WD40 for lube, use something to knock it gently, and then try to screw it out. apply the force lightly and slowly first and then increase the power to take it out作者: ford 時間: 2010-4-1 01:34
take the 引擎頂 入厨房燒燒佢作者: EricRC 時間: 2010-4-1 09:29
thx以上師兄，問兩個問題
1·加長扶手用乜野加長呢？
2·knock it gently 噶時候點樣固定個引擎頂呢？
THX作者: arashi2009 時間: 2010-4-1 09:47
Another method of removing a seized glow plug involves heat. Glow plug and cylinder head are made from two different materials, aluminum and metal. A gas torch may suffice as the parent part; the cylinder head is not too heavy. You need to heat the part around the cylinder head. Heat will expand the cylinder head to encourage it to loosen its grip on the glow plug. Then unscrew the glow plug with the wrench immediately before the part has a chance to cool down.作者: hkbananaking 時間: 2010-4-2 03:38
thx以上師兄，問兩個問題
1·加長扶手用乜野加長呢？
2·knock it gently 噶時候點樣固定個引擎頂呢？
T ...
EricRC 發表於 2010-4-1 09:29
所以我無眼睇成架車成咗俾朋友,那台novarossi好似要成二千蚊的, 2000年的事了
