RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: CVD & Universal shaft 點分別 ? [打印本頁]

作者: WTO 時間: 2006-7-18 17:25
標題: CVD & Universal shaft 點分別 ?
有人話Universal shaft 即係CVD ??!!

究竟邊條係CVD ? 邊條係Universal Shaft 呢 ?

作者: 雷公 時間: 2006-7-18 17:33
they are the same thing. quoted from http://www.hpiracing.com/glossary.htm

CVD -- An abbreviation for Constant Velocity Drive. "CVD" is a trademark of MIP (Moore's Ideal Products, Inc.). MIP offers their CVD universal dogbones for many R/C kits, and their CVD's are featured as standard equipment on the RS4 Pro 2, Nitro MT Racer and RS4 Pro 3. The main features of the MIP CVD's are their improved efficiency over standard universal dogbones, ability to be rebuilt if an axle or "bone" is bent or damaged and ease of finding replacement parts.

作者: WTO 時間: 2006-7-18 17:38

原帖由雷公於 2006-7-18 17:33 發表
they are the same thing. quoted from http://www.hpiracing.com/glossary.htm

CVD -- An abbreviation for Constant Velocity Drive. "CVD" is a trademark of MIP (Moore's Ideal Pro ...

我知HPI係用MIP CVD. 咁 Kyosho 嗰d 萬向叫乜呢 ?

作者: 雷公 時間: 2006-7-18 17:40

原帖由 WTO 於 2006-7-18 17:38 發表

我知HPI係用MIP CVD. 咁 Kyosho 嗰d 萬向叫乜呢 ?

咪叫做 universal shaft 囉.........CVD is a neologism derived english word, it means the same thing as universal shaft

作者: WTO 時間: 2006-7-18 17:48

原帖由雷公於 2006-7-18 17:40 發表

咪叫做 universal shaft 囉.........CVD is a neologism derived english word, it means the same thing as universal shaft

咁universal shaft 有冇淨更換axle or bone ?

作者: 雷公 時間: 2006-7-18 17:50

原帖由 WTO 於 2006-7-18 17:48 發表

咁universal shaft 有冇淨更換axle or bone ?

有架﹐你咩車先﹖京商我唔清楚..........
但出面好多萬向都有得拆骨架啦﹐方便換﹐方便清洗

作者: WTO 時間: 2006-7-18 17:58

原帖由雷公於 2006-7-18 17:50 發表

有架﹐你咩車先﹖京商我唔清楚..........
但出面好多萬向都有得拆骨架啦﹐方便換﹐方便清洗

咁你清楚咩車 ? 同出面邊d車嘅萬向universal shaft有得拆骨 ?

原帖由雷公於 2006-7-18 17:33 發表
they are the same thing. quoted from http://www.hpiracing.com/glossary.htm

CVD -- An abbreviation for Constant Velocity Drive. "CVD" is a trademark of MIP (Moore's Ideal Pro ...

咁你又話係一樣嘅 ?

[ 本帖最後由 WTO 於 2006-7-18 18:01 編輯 ]

作者: 雷公 時間: 2006-7-18 18:02

原帖由 WTO 於 2006-7-18 17:58 發表

Kyosho , hpi , tamiya GP & EP

咁出面邊d車嘅萬向universal shaft有得拆骨 ?
TAMIYA 有﹐陣間POST相比你睇

咁你又話係一樣嘅 ?

係一樣播﹐CVD即係 CokaCola﹐universal shaft 咪係大眾化講既 Coke 囉﹐你明唔明商標註冊既principles?

作者: 雷公 時間: 2006-7-18 18:08

登錄/註冊後可看大圖

作者: WTO 時間: 2006-7-18 18:16

原帖由雷公於 2006-7-18 18:08 發表

登錄/註冊後可看大圖

登錄/註冊後可看大圖

CVD ?

作者: 雷公 時間: 2006-7-18 18:17

原帖由 WTO 於 2006-7-18 18:16 發表

CVD ?

up to u

作者: WTO 時間: 2006-7-18 18:18
咁呢樣叫咩 ?

作者: 雷公 時間: 2006-7-18 18:20

原帖由 WTO 於 2006-7-18 18:18 發表
咁呢樣叫咩 ?

咪又係萬向囉﹐至於可唔可以拆骨就視乎有無螺絲扭到出黎

作者: coronafans 時間: 2006-7-18 19:05
Kyosho都有散件賣

作者: WTO 時間: 2006-7-18 19:29

原帖由 coronafans 於 2006-7-18 19:05 發表
Kyosho都有散件賣

上圖有冇 ?

作者: lolman 時間: 2006-7-18 19:31
話時話...我鍾意o個 D 拆唔到o個D 萬向喎.....

因為有時你粒幾米扭唔實....支橫塞會走出來...整爆個杯喔......=.=

作者: WTO 時間: 2006-7-18 20:07
Kyosho嘅萬向 call universal swing shafts.

[ 本帖最後由 WTO 於 2006-7-18 20:08 編輯 ]

作者: 雷公 時間: 2006-7-18 20:14

原帖由 WTO 於 2006-7-18 20:07 發表
Kyosho嘅萬向 call universal swing shafts.

你係咪想知道你想要個條萬向係咪有得拆骨呀﹖你比個PART NUMBER﹐可能會幫你找到答案﹐你就甘比幅圖無用

作者: WTO 時間: 2006-7-18 20:20

原帖由雷公於 2006-7-18 20:14 發表

你係咪想知道你想要個條萬向係咪有得拆骨呀﹖你比個PART NUMBER﹐可能會幫你找到答案﹐你就甘比幅圖無用

Kyosho IFW162.

作者: 雷公 時間: 2006-7-18 20:20

登錄/註冊後可看大圖

尼條應該無得拆

作者: WTO 時間: 2006-7-18 20:43
所以我覺得 < just my 2cents >
有得拆骨嘅萬向節 call CVD 較適合.
冇得拆骨嘅萬向節 call universal swing shaft 較適合.

作者: 雷公 時間: 2006-7-18 21:00

原帖由 WTO 於 2006-7-18 20:43 發表
所以我覺得 < just my 2cents >
有得拆骨嘅萬向節 call CVD 較適合.
冇得拆骨嘅萬向節 call universal swing shaft 較適合.

甘如果你鐘意甘樣叫都無問題﹐不過事實就係就算拆得既都係叫做UNIVERSAL SHAFT﹐HPI都清清楚楚講左CVD係MIP個TRADEMARK﹐即係話如果唔係MIP既萬向﹐你就唔可以叫CVD﹐同樣道理﹐KFC係無BIG MAC或巨無霸賣﹐任天堂係無PSP或PS2賣。

作者: WTO 時間: 2006-7-18 21:36

原帖由雷公於 2006-7-18 21:00 發表

甘如果你鐘意甘樣叫都無問題﹐不過事實就係就算拆得既都係叫做UNIVERSAL SHAFT﹐HPI都清清楚楚講左CVD係MIP個TRADEMARK﹐即係話如果唔係MIP既萬向﹐你就唔可以叫CVD﹐同樣道理﹐KFC係無BIG MAC或巨無霸賣﹐任天 ...

我係指hpi ,kyosho嘅萬向咁叫有乜問題呀 ? (1st pic is HPI , 2nd pic is Kyosho)
另, 我咪寫咗兩種都係萬向節囉...煩人

至於MIP CVD 如冇為嗰種車出CVD當然唔可以叫CVD啦.....

原帖由 WTO 於 2006-7-18 17:25 發表
有人話Universal shaft 即係CVD ??!!

究竟邊條係CVD ? 邊條係Universal Shaft 呢 ?

請再睇睇我嘅問題........究竟邊條係CVD ? 邊條係Universal Shaft 呢 ?

原帖由雷公於 2006-7-18 17:33 發表
they are the same thing. quoted from http://www.hpiracing.com/glossary.htm

CVD -- An abbreviation for Constant Velocity Drive. "CVD" is a trademark of MIP (Moore's Ideal Pro ...

又係你自己答 they are same thing............

作者: 雷公 時間: 2006-7-18 23:39
universal shaft 咪即係萬向囉﹐CVD咪又係萬向囉
Yes, they are the same thing, both functionally and structurally.
Your question is too ambiguous, it's equivalent to asking: "可口可樂 & 汽水點分別 ?"
我唔係煩人﹐我係工房入面最蠢果位弟弟入黎誤會左你一個無一不曉既高人﹐失敬失敬

作者: WTO 時間: 2006-7-19 09:35

原帖由雷公於 2006-7-18 23:39 發表
universal shaft 咪即係萬向囉﹐CVD咪又係萬向囉
Yes, they are the same thing, both functionally and structurally.
Your question is too ambiguous, it's equivalent to asking: "可口可樂 & 汽 ...

咁你又入嚟回post !!!

你好煩 !!

ps. 你嘅心事解决未 ???

作者: oliver 時間: 2006-7-20 16:23

原帖由 WTO 於 2006-7-19 09:35 發表

咁你又入嚟回post !!! 你好煩 !!

ps. 你嘅心事解决未 ???

this?

作者: monkichi0210 時間: 2006-7-20 16:58
just want to say something.....
the things brother thunder said are the truth......that's it!!!
萬向狗骨 = universal shaft
CVD = 萬向狗骨 = universal shaft......but CVD is the trademark of MIP.........so u can't said for example tamiya universal shaft = tamiya CVD......
said anything is CVD or not............not depends on it can change the parts or not.......just depends it's from MIP or not......so simple
if bro. understand the example of cola........should be understand the case of universal shaft.......
bro. don't argue la......to be fair la.......

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)