RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Audi R8R work in progress...Finished! [打印本頁]

作者: avenger 時間: 2006-7-17 23:03
標題: Audi R8R work in progress...Finished!
Hi, just to share with u guys my latest project..Tamiya F103 Audi R8R..

....work is still in progress...

[ 本帖最後由 avenger 於 2006-8-11 22:59 編輯 ]

作者: Mobility 時間: 2006-7-18 12:42
i'm waiting for this one

作者: avenger 時間: 2006-7-18 13:38

原帖由 Mobility 於 2006-7-18 12:42 發表
i'm waiting for this one

me too me too!!!!

I'll definitely buy more than one!!

Hope Tamiya will continue to release more LMP shells!!

作者: Mobility 時間: 2006-7-18 16:06

原帖由 avenger 於 2006-7-18 01:38 PM 發表

me too me too!!!!

I'll definitely buy more than one!!

Hope Tamiya will continue to release more LMP shells!!

Cheer Bro, when it release, we go to buy together!

作者: avenger 時間: 2006-7-18 23:04
More progress today!

Some pics showing the extremely nice carbon fibre cockpit panel and tail lights! (I didn't notice these when I bought the body set!!) Tamiya's product always have good quality!

But the rear wing sticker is very tricky to apply...impossible to avoid 'bubbles' in the screw position. I would recommend painting the silver color of the rear wing and then cut out and paste the audi logo instead of applying the whole sticker to anyone who is going to build this body kit.

[ 本帖最後由 avenger 於 2006-7-18 23:11 編輯 ]

作者: 龍崗小吳 時間: 2006-7-18 23:56
My R8R & XJR-12

作者: avenger 時間: 2006-7-19 00:57

原帖由 龍崗小吳 於 2006-7-18 23:56 發表
My R8R & XJR-12

cool stuff!!

can u take a close up pic at the R8R rear wing?

作者: loken 時間: 2006-7-19 13:13
禁多c兄玩 Le Mans, 約唔到玩車, 約出泥吹下水都好!

作者: 鬼見仇 時間: 2006-7-21 11:47
我都有部R8R, 仲未開工!

作者: RX-7FD 時間: 2006-7-21 22:45

原帖由 loken 於 2006-7-19 13:13 發表
禁多c兄玩 Le Mans, 約唔到玩車, 約出泥吹下水都好!

係咪先? 我100% lemans fans...

作者: avenger 時間: 2006-7-23 01:04
More progress today!!

Painting the driver took more time than I have expected....

I used Gunze H311 (Gray) for the driver's clothes as they are never pure white....
The sticker are home made and the quality of the sticker is not as good as I have anticipated...but ok la...

....where is the head!!??

helmet painting in progress

The helmet needed a LOT of sanding

[ 本帖最後由 avenger 於 2006-7-23 01:14 編輯 ]

作者: RX-7FD 時間: 2006-7-23 01:47
服晒你~~好細緻

作者: speedstar 時間: 2006-7-23 09:59

原帖由 avenger 於 2006-7-23 01:04 發表
More progress today!!

Painting the driver took more time than I have expected....

I used Gunze H311 (Gray) for the driver's clothes as they are never pure white....
The sticker are home made ...

You paint on the outer of the shell? Is it easy to come out as Gunze H311 is just arcylic paint for static models. I used to paint from the inside.

作者: avenger 時間: 2006-7-23 11:34

原帖由 RX-7FD 於 2006-7-23 01:47 發表
服晒你~~好細緻

Thanks!
Life is boring, have to find something interesting to kill time

原帖由 speedstar 於 2006-7-23 09:59 發表

You paint on the outer of the shell? Is it easy to come out as Gunze H311 is just arcylic paint for static models. I used to paint from the inside.

I paint from outside of the shell, so that the driver will not appear shiny and waxed.
The Gunze paint is much easier to hand paint and takes up much better than the XF7 I used for the gloves!

作者: speedstar 時間: 2006-7-23 16:25

原帖由 avenger 於 2006-7-23 11:34 發表

I paint from outside of the shell, so that the driver will not appear shiny and waxed.
The Gunze paint is mu ...

Yes, shiny is a problem...may be I try next time to see whether it works good...

作者: avenger 時間: 2006-7-29 18:25
Still in progress!!

The helmet took me longer than the car itself (almost)!!

Process done = sanding, primer, white base, red color, stickers

The stickers are very hard conform to the round surface of the helmet....there is a visible wrinkle in the blue area....

[ 本帖最後由 avenger 於 2006-7-29 18:27 編輯 ]

作者: jpmontoya2 時間: 2006-7-29 18:50
Oh..the wrinkle....i suggest you to paint it back in Blue..rather than use sticker~

作者: avenger 時間: 2006-7-31 00:27
Sigh...
Difficult ma...If I paint the area blue, I still have to cut the "E.Pirro" out...thus still unable to get perfectly flat.
But it is in the 'rear' part of the helmet, not readlly seen when the helmet is attached to the car...
Anyway, I'll try to spray a clear topcoat to see if the 'wrinkle' slightly improve next week.

作者: loken 時間: 2006-8-3 11:41

原帖由 avenger 於 2006-7-29 18:25 發表
Still in progress!!

The helmet took me longer than the car itself (almost)!!

Process done = sanding, primer, white base, red color, stickers

The stickers are very hard conform to the round ...

一字記之曰 '靚'!

作者: loken 時間: 2006-8-3 11:46
在pyc攪個 Le Mens 同樂日, 唔知有冇興趣!

作者: courel500 時間: 2006-8-3 11:58

原帖由 Mobility 於 2006-7-18 12:42 發表
i'm waiting for this one

ME 2 , NOW WAITING PICK UP

作者: courel500 時間: 2006-8-4 11:18

原帖由 loken 於 2006-8-3 11:46 發表
在pyc攪個 Le Mens 同樂日, 唔知有冇興趣!

好喎 !

作者: avenger 時間: 2006-8-4 20:58

原帖由 loken 於 2006-8-3 11:46 發表
在pyc攪個 Le Mens 同樂日, 唔知有冇興趣!

有興趣!

作者: loken 時間: 2006-8-5 10:14
一於貢話!
在晴朗的一天.......出發!!!!!!!!!!!!

[ 本帖最後由 loken 於 2006-8-5 10:15 編輯 ]

作者: tomy 時間: 2006-8-10 01:13

原帖由 loken 於 2006-8-3 11:46 發表
在pyc攪個 Le Mens 同樂日, 唔知有冇興趣!

我去,玩得PM我呀師兄.THX

作者: RX-7FD 時間: 2006-8-10 10:21

原帖由 loken 於 2006-8-3 11:46 發表
在pyc攪個 Le Mens 同樂日, 唔知有冇興趣!

龜速車河同樂日..

作者: courel500 時間: 2006-8-10 10:37

原帖由 RX-7FD 於 2006-8-10 10:21 發表

龜速車河同樂日..

其實都唔慢呀 ! 我而家試緊個 101 雙星電變可以用到幾耐 , 全原裝齒比 , 行黑豬 540

作者: loken 時間: 2006-8-10 10:54
Le Mens & F1 同樂日
18/08 下星期五如何?

[ 本帖最後由 loken 於 2006-8-10 12:39 編輯 ]

作者: courel500 時間: 2006-8-10 12:00
8月 ?

作者: Mobility 時間: 2006-8-10 12:39
一至五要返工

作者: loken 時間: 2006-8-10 12:39

原帖由 courel500 於 2006-8-10 12:00 發表
8月 ?

已更正!

作者: avenger 時間: 2006-8-11 22:53

原帖由 loken 於 2006-8-10 10:54 發表
Le Mens & F1 同樂日
18/08 下星期五如何?

But Friday I need to work....
Maybe I can fire my boss?!?

Anyway, my F103RS Audi R8R is finally finished!!
Please note that I have the original Audi R8R wheel set!!

Hope u guys like it!

[ 本帖最後由 avenger 於 2006-8-11 22:58 編輯 ]

作者: gibson 時間: 2006-8-11 23:01
Very smart, breathless......
Outstanding!!!!!!

作者: coronafans 時間: 2006-8-11 23:04

原帖由 loken 於 2006-8-10 10:54 發表
Le Mens & F1 同樂日
18/08 下星期五如何?

要返工呀!

作者: loken 時間: 2006-8-11 23:27

原帖由 avenger 於 2006-8-11 22:53 發表

But Friday I need to work....
Maybe I can fire my boss?!?

Anyway, my F103RS Audi R8R is finally finished!!
Please note that I have the original Audi R8R wheel set!!

Hope u guys like it!

Good Idea!
Fire Him!

作者: AMAT 時間: 2006-8-11 23:28

原帖由 avenger 於 2006-8-11 22:53 發表

But Friday I need to work....
Maybe I can fire my boss?!?

Anyway, my F103RS Audi R8R is finally finished!!
Please note that I have the original Audi R8R wheel set!!

Hope u guys like it!

NICE~!^_^

作者: loken 時間: 2006-8-11 23:31
貢多人要返工, 不如改期啦!
大家比d意見!

作者: rcplayer 時間: 2006-8-12 11:03

原帖由 loken 於 2006-8-11 23:31 發表
貢多人要返工, 不如改期啦!
大家比d意見!

19 la

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)