RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Sand Scorcher [打印本頁]

作者: ebe 時間: 2010-3-2 14:15
標題: Sand Scorcher
係 KWS 見到 Sand Scorcher $1,690 連電變, 價 $$ 好似唔錯唔…偉 x 就貴幾十...

作者: albertau2011 時間: 2010-3-2 14:46
偉 x 就貴幾十...正常!

作者: ikesan 時間: 2010-3-2 15:17
c hing邊間$1,690 連電變、我２星期前見過19xx、係KWS街頭第一間。

作者: ericlam 時間: 2010-3-2 15:25
$1690 ??第一批Order價都吾止，有咁平我又買多部做parts車lu

作者: tommy1218 時間: 2010-3-2 17:00
咁平,抵買喎

作者: ericlam 時間: 2010-3-2 17:14

係 KWS 見到 Sand Scorcher $1,690 連電變, 價 $$ 好似唔錯唔…偉 x 就貴幾十...
ebe 發表於 2010-3-2 14:15

登錄/註冊後可看大圖

Pls pm shop name, Thx!

作者: hochoi 時間: 2010-3-2 18:00
創x,我見咁抵都忍唔住買多部

作者: fyin 時間: 2010-3-2 18:13
創x啲價係海鮮價, 平就好快啲買喇. 第日可能即刻唔同價錢.
創x標價習慣成日轉價錢, 等你check唔到邊間平.
同等你就算check第2間覺得平, 但都要去佢間睇吓佢啲價會唔會再平啲.
佢做生意捉客人心理一流.

所以大家都成日都一定會去創x睇價.

作者: markyu 時間: 2010-3-2 22:45
早兩個星期問, 1850 HKD,

作者: fyin 時間: 2010-3-3 09:59

早兩個星期問, 1850 HKD,
markyu 發表於 2010-3-2 22:45

登錄/註冊後可看大圖

創x就係這樣捉住我地啲模型友心理囉.
用一招....今日唔知聽日價$$$$$ - 等你日日去check價

作者: jypepe 時間: 2010-3-3 10:46
點止今日唔知聽日...
以前時不時o向門口出面
聽到d 阿甲阿乙前後腳咁去問價,
出番黎講..."半個鐘前問幾$幾$喎..., 又唔同左啦?"

作者: fyin 時間: 2010-3-3 11:01
所以問到平價就好買喇, 轉頭可能又唔同價位喇.

作者: Badman916 時間: 2010-3-3 11:29
請問呢批貨係咪已經搞返好車尾零件漏鑽孔果個問題?

作者: RCman 時間: 2010-3-3 12:04

請問呢批貨係咪已經搞返好車尾零件漏鑽孔果個問題?
Badman916 發表於 2010-3-3 11:29

登錄/註冊後可看大圖

出面賣緊的..個尾cage都重係有問題的嗎？

作者: peter7 時間: 2010-3-3 13:30
You can always exchange the bad rear cage with the shop. I exchanged mine from Wang Kee.

作者: Oakfield 時間: 2010-3-3 19:06

請問呢批貨係咪已經搞返好車尾零件漏鑽孔果個問題?
Badman916 發表於 2010-3-3 11:29

登錄/註冊後可看大圖

What's the problem. have photos to see see!!

作者: peter7 時間: 2010-3-3 22:28
16# Oakfield

the hold drilled too far back. Should drill at the red dot.

[attach]350344[/attach][attach]350344[/attach]

作者: jpmontoya2 時間: 2010-3-3 22:58
thanks brother peter7 for the clarification...

作者: Oakfield 時間: 2010-3-3 23:10

16# Oakfield

the hold drilled too far back. Should drill at the red dot.

350344350344
peter7 發表於 2010-3-3 22:28

登錄/註冊後可看大圖

Oh. No. I just bought today

Is a big problem?

作者: jpmontoya2 時間: 2010-3-3 23:19

Oh. No. I just bought today
Is a big problem?
Oakfield 發表於 2010-3-3 23:10

登錄/註冊後可看大圖

You can force a new hole if you want...or u can wait for a 3rd party metal cage..:-)

作者: peter7 時間: 2010-3-3 23:25
You can exchange at the shop. Tamiya sent all replacement rearcages to dealer. Go ask your shop first. I bought my SS with bad rearcage at Wang Kee. And went there to exchange for a good one. They have a whole box of rearcage waiting for customer to exchange. I think other shop can do the same.

作者: jpmontoya2 時間: 2010-3-3 23:37

You can exchange at the shop. Tamiya sent all replacement rearcages to dealer. Go ask your shop first. I bought my SS with bad rearcage at Wang Kee. And went there to exchange for a good one. They hav ...
peter7 發表於 2010-3-3 23:25

登錄/註冊後可看大圖

Sounds great customer service...:-)

i am waiting for a metal one form ebay...haahha

作者: peter7 時間: 2010-3-4 00:00
22# jpmontoya2

Good CS but bad QC

作者: combatfung 時間: 2010-3-6 11:44
i buy $1831 ah at wai X

作者: python 時間: 2010-3-6 18:19

22# jpmontoya2

Good CS but bad QC
peter7 發表於 2010-3-4 00:00

登錄/註冊後可看大圖

Could this be produced by other south-east asian country instead of Japs?

作者: lespaul 時間: 2010-3-8 19:25
本帖最後由 lespaul 於 2010-3-8 19:26 編輯

Could this be produced by other south-east asian country instead of Japs?
python 發表於 2010-3-6 18:19

登錄/註冊後可看大圖

Maybe in Philippines!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)