RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Seek comment on servo, ESC & battery for Cross 1/18 fire kart [打印本頁]

作者: oowan 時間: 2009-12-12 13:03
標題: Seek comment on servo, ESC & battery for Cross 1/18 fire kart
Just assembled the kart,
Chings, any recommendation on the servo, ESC and battery

: 登錄/註冊後可看大圖

作者: tonyho88888 時間: 2009-12-12 13:25
好似好單薄?

作者: hobby123 時間: 2009-12-12 13:40
18仔,差唔多咖啦!

以前玩X-ray部18仔都係咁上下,不過吳知有冇海綿Bumber咁啫？

作者: hobby123 時間: 2009-12-12 13:42
本帖最後由 hobby123 於 2009-12-12 13:52 編輯

Just assembled the kart,
Chings, any recommendation on the servo, ESC and battery
oowan 發表於 2009-12-12 13:03

登錄/註冊後可看大圖

Servo用Hitec HSG-5084MG 得唔得呢?
Spec 如下:
Motor Type: 3 Pole
Bearing Type: Metal Gear
Speed: 0.07 / 0.05 sec @ 60 deg.
English Metric
Torque: 21 / 26 oz.in (4.8v/6v) 1.5 / 1.9 kg.cm
Size: 1.14" x 0.51" x 1.18" 29.00 x 13.00 x 30.00mm
Weight: 0.76oz 21.50g

: 登錄/註冊後可看大圖

作者: sunfffd 時間: 2009-12-12 14:02
are the tyres typical 18th tyres?

作者: oowan 時間: 2009-12-14 13:06
I wanted to find suitable servo and battery at KWS last Sat. but disappointed.
No suitable 6.6v battery found, also not from Cat Shop, moreover, the staff of Cat Shop said that he never saw player who could play this kart.
I tried to put a Hitec mini servo to it but found no good, I also found if using a 280 size motor, it was overheated but if using 370 size motor, the motor mount was not fit for the screw hole of the motor.
I spent 4 hrs. for using different electronic equipment to test but now the kit is only in the box.

作者: -69- 時間: 2009-12-29 02:01
都幾好樣 ! ;-)
Hm....加上來好像還貴過架京商油Kart.... !! 如果平D就真係一流.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)