RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 請問京商28偈可快啲嗎? [打印本頁]

作者: 雪茄 時間: 2006-7-6 16:57
標題: 請問京商28偈可快啲嗎?
請問各位大大.京商28偈架車点改會快啲..我架28唔夠15級快=.="...希望各位大大指教XP..

作者: coronafans 時間: 2006-7-6 20:57
玩Buggy? 定平地?

作者: 雪茄 時間: 2006-7-6 22:18
是平地車..

作者: lokaman 時間: 2006-7-11 02:41
標題: hi
京商28偈架車点改會快啲,用得大机車身有返上下重,有時試直路當然無15機快,10touring得1/3 到重量比8仔,咁點會快得架頭段

作者: benson 時間: 2006-7-15 03:21
雪茄你好.....28偈扭力太大,1波起步齒行14太慢,2波行17齒唔夠快,改改佢,1波起步齒行16,2波行20,跟手抬埋波箱,換2波齒改行41,包你脫胎換骨,15偈食晒...騎騎騎騎...........

作者: sleepyleung 時間: 2006-7-15 03:36
雪茄你好我知石門有高人在星期六夜晚10:00到放28偈.有時間來看看好嗎?

作者: chrishkyung 時間: 2006-7-15 13:31
the above is right....the original gear ratio is too slow....
BTW, the original 28 engine can be modified to be more powerful....but the following problems have to be considered:

1) do u have these cutting skills? Did u have experience in using dremel....

2) do u have any idea about engine modification

3) the durability....yes, we have modified the Kyosho 28 engine...and it surely is faster than the orignal bit la...But we found that the wearness of the piston and cylinder is very serious after modification....the material used for 28 engine is similar to that of kyosho GXR15 engine....the cylinder and piston material is too soft la........Although the modification can make engine running faster, the engine life is shorten unreasonably. Since we are looking for using other engine, we dont care the life of the orignal engine...then do the modification.

Therefore, we dont recomment u to modify it.....Just change the gears and modify the 2speed clutch is good enough for playing

作者: chrishkyung 時間: 2006-7-15 13:33
the above is right....the original gear ratio is too slow....
BTW, the original 28 engine can be modified to be more powerful....but the following problems have to be considered:

1) do u have these cutting skills? Did u have experience in using dremel....

2) do u have any idea about engine modification

3) the durability....yes, we have modified the Kyosho 28 engine...and it surely is faster than the orignal bit la...But we found that the wearness of the piston and cylinder is very serious after modification....the material used for 28 engine is similar to that of kyosho GXR15 engine....the cylinder and piston material is too soft la........Although the modification can make engine running faster, the engine life is shorten unreasonably. Since we are looking for using other engine, we dont care the life of the orignal engine...then do the modification.

Therefore, we dont recomment u to modify it.....Just change the gears and modify the 2speed clutch is good enough for playing

作者: 雪茄 時間: 2006-7-15 17:35
多謝各位大大分享!
小弟新手一名, 邊到可以買到d波箱牙?
廣華街d老闆話要自己做..=.="

作者: 無限mtx-3 時間: 2006-7-15 17:42

原帖由雪茄於 2006-7-15 17:35 發表
多謝各位大大分享!
小弟新手一名, 邊到可以買到d波箱牙?
廣華街d老闆話要自己做..=.="

不要強求喔....通常 28 級 25 級講既都係大扭力.....強行黎改都無所為...大家取向唔同嘛！

如果你改左...到你要黎玩 offroad，扒野就唔夠力水喇！

你買部 12 級既 1/10 平地車就快哂啦！

作者: coronafans 時間: 2006-7-15 23:58
果部Kyosho ST玩像真多過玩速度

作者: WTO 時間: 2006-7-16 08:37

原帖由 coronafans 於 2006-7-15 23:58 發表
果部Kyosho ST玩像真多過玩速度

係Inferno GT

作者: lokaman 時間: 2006-7-16 09:05

原帖由 sleepyleung 於 2006-7-15 03:36 發表
雪茄你好我知石門有高人在星期六夜晚10:00到放28偈.有時間來看看好嗎?

rold and hohoho426 for kyosho inferno GT 28偈 wo

作者: lokaman 時間: 2006-7-16 09:17

原帖由 benson 於 2006-7-15 03:21 發表
雪茄你好.....28偈扭力太大,1波起步齒行14太慢,2波行17齒唔夠快,改改佢,1波起步齒行16,2波行20,跟手抬埋波箱,換2波齒改行41,包你脫胎換骨,15偈食晒...騎騎騎騎...........

作者: lokaman 時間: 2006-7-16 09:18

原帖由雪茄於 2006-7-6 16:57 發表
請問各位大大.京商28偈架車点改會快啲..我架28唔夠15級快=.="...希望各位大大指教XP..

kyosho inferno GT???

作者: lokaman 時間: 2006-7-16 09:19

原帖由 無限mtx-3 於 2006-7-15 17:42 發表

不要強求喔....通常 28 級 25 級講既都係大扭力.....強行黎改都無所為...大家取向唔同嘛！

如果你改左...到你要黎玩 offroad，扒野就唔夠力水喇！

你買部 12 級既 1/10 平地車就快哂啦！

I AGREE

作者: 雪茄 時間: 2006-8-1 19:45
哦..
咁睇黎我都要買過架車喇 @@
玩街車無理由慢吞吞架嘛..
各位大大有乜好介紹呢?

作者: wai 時間: 2006-8-1 20:15
你係想直路快姐,咁 1/8 21級偈足夠,快到你驚........

作者: 雪茄 時間: 2006-8-1 21:14
1/8會唔會貴到驚?..
都係買架1/10玩下, 唔知會唔會好d?
聽人講VoneSSS同FW-05T都唔錯玩,
邊部好d??

作者: andrewlio 時間: 2006-8-1 21:46
3s 吧!

05系列太哂錢啦!

作者: 雪茄 時間: 2006-8-7 15:41
唉..
終於買左部新車..希望依部快d啦

部新車有乜要set架?希望各位大大指點~
新手砌車, 請大大們比d意見~
今次真係玩大左

登錄/註冊後可看大圖

[ 本帖最後由雪茄於 2006-8-7 21:33 編輯 ]

作者: WTO 時間: 2006-8-7 16:29

原帖由雪茄於 2006-8-7 15:41 發表
唉..
終於買左部新車..希望依部快d啦
部新車有乜要set架?希望各位大大指點~
新手砌車, 請大大們比d意見~
今次真係玩大左

[img]http://image07.webshots.com/7/3/25/18/2055325180080572600PmPQpb_ph.j ...

d相睇吾到 !

作者: TODA 時間: 2006-8-7 19:25

原帖由雪茄於 2006-8-7 15:41 發表
唉..
終於買左部新車..希望依部快d啦
部新車有乜要set架?希望各位大大指點~
新手砌車, 請大大們比d意見~
今次真係玩大左

[img]http://image07.webshots.com/7/3/25/18/2055325180080572600PmPQpb_ph.j ...

3R...Good Car...

買多幾套胎入場飛下啦....

作者: oliver 時間: 2006-8-7 20:01

原帖由 TODA 於 2006-8-7 19:25 發表

3R...Good Car...

買多幾套胎入場飛下啦....

ar豪哥 check PM

作者: missivan 時間: 2006-8-7 21:48
d相整番好喇~
好車好車!!

[ 本帖最後由 missivan 於 2006-8-7 21:52 編輯 ]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)