RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Nuova Faor 1/5 Electric SUPERBIKE 2009 Factory R-Edition [打印本頁]

作者: EDI 時間: 2009-11-2 21:25
標題: Nuova Faor 1/5 Electric SUPERBIKE 2009 Factory R-Edition
請問LEE隻電單車難唔難玩GAR!~THX

作者: jf813 時間: 2009-11-3 09:20
Not too hard ar. We are playing the nitro one now. Just need some time the set it up properly.

作者: EDI 時間: 2009-11-3 12:46
OH!~JF813!~你玩緊油....我想玩電...你係邊度買GAR?....我ONLY見網有得買...TOTAL 成7000蚊
我怕玩油ENGINE難攪 THX!~

作者: jf813 時間: 2009-11-4 12:45
We play at Yuen Long and Jordan. I play the TT nitro and my friends have the NF501 and NF506, and one 501 converted to electric. Try Hung sing I know they have the nitro one but not sure if they have the electric version. Get one and play together ar.

作者: EDI 時間: 2009-11-4 13:11
我問代理...都冇覆我...我買左就搵你地la!~

作者: ANGELZ 時間: 2009-11-4 13:23
NEW TTE BIKE值得等待噢!!

作者: jf813 時間: 2009-11-4 13:38
http://www.nuovafaor.it/modules. ... article&sid=724

maybe you can consider this one ar. still the latest 509 with front brake at only 1/3 the px wor.

作者: jf813 時間: 2009-11-4 13:40
Maybe too busy eating, I see them eating dinner at KWS last night.

我問代理...都冇覆我...我買左就搵你地la!~
EDI 發表於 2009-11-4 13:11

登錄/註冊後可看大圖

作者: EDI 時間: 2009-11-13 17:24
armarm郵差送左黎la~..
但有d失望...個盒係506...嚇差死....
同架車有少少生銹,,,,
又冇說明書....lee鋪真係毛蟲入手....
有兩個servo位.....要一個定二個ervo gar?....唉,,官網又冇menu download....

作者: jf813 時間: 2009-11-13 17:55
yes ar, you need 2 servo, one for brake and the other for steering. The front fork was rusted!!! Try to use some polishing compound and clean it off. For normal use it should be ok as it is always moving and should not rust anymore. Looking forward to see you run it soon. hehe

作者: EDI 時間: 2009-11-13 18:05
ok!~so what servo size i should use?9551 size or 9650 size?

作者: jf813 時間: 2009-11-13 18:11
Standard size is ok. 9551

作者: EDI 時間: 2009-11-13 18:18
Thx q I will go kws buy tonight...but for break serveo don't need to use 9551 right?

作者: jf813 時間: 2009-11-13 18:33
You just need a high torque servo for the brake.

作者: ANGELZ 時間: 2009-11-13 19:37
E-BIKE的前煞車SERVO 不需要大扭力您必須與ESC後輪煞車混控
我的經驗前碟煞車SERVO使用3KG-CM 配合ESC後輪煞車有很好的效果
為了減輕重量使用微型SERVO SAVOX SH-255

登錄/註冊後可看大圖

若是要使用在 n-bike 那就要考慮前後碟的搭配可能就需要大扭力servo
參考參考!!

作者: EDI 時間: 2009-11-13 19:54
Thx Q my friend! 要聽日先去買得。。servo 碟有冇咩特別要求？我咩menu都冇，，，慘，有冇師兄可以影張servo 擺位大特寫睇吓

作者: jf813 時間: 2009-11-13 21:35
nothing really special. Just remember the steering is reversed. The wheel turn right the bike will turn left. That's all. hehe

作者: minimini 時間: 2009-11-13 22:58

armarm郵差送左黎la~..
但有d失望...個盒係506...嚇差死....
同架車有少少生銹,,,,
又冇說明書....lee鋪真係毛蟲入手....
有兩個servo位.....要一個定二個ervo gar?....唉,,官網又冇menu download....
EDI 發表於 2009-11-13 17:24

登錄/註冊後可看大圖

how much is this car ??............

作者: EDI 時間: 2009-11-13 23:01

nothing really special. Just remember the steering is reversed. The wheel turn right the bike will turn left. That's all. hehe
jf813 發表於 2009-11-13 21:35

登錄/註冊後可看大圖

哈!~咁奇怪....thx

作者: jf813 時間: 2009-11-14 09:52
Ya, because the 1/5 steering use the shift of cg to steer. so the wheel turn right to make the bike lean to the left. And do not tighten the steering push rod spring too much as it will become very hard to drive. A good starting pt is if you push the front wheel by hand from side to side with the radio off it will not move the servo.

哈!~咁奇怪....thx
EDI 發表於 2009-11-13 23:01

登錄/註冊後可看大圖

作者: EDI 時間: 2009-11-15 00:56
我問鬼佬點解我訂509用506盒,有生銹,冇說明書.....佢妙問妙答...
don't worry about the box, NF always has older boxes for the bikes. When
the SF-506 was new, they sold it in SF-501 boxes :-)

Unfortunately NF doesn't have a manual yet, I'm still fighting to get
one. If I have one, you will be able to download it from the SF-509
website in my shop.

This is just surface rust, it can be easily removed. I made good
experience with "Nevr Dull", this is some kind of special polish towels
for chrome parts of custom motorcycles.
我比佢吹啤

作者: EDI 時間: 2009-11-15 12:02
你地D parts 如車軑通常係邊度買?...

作者: jf813 時間: 2009-11-15 13:56
本帖最後由 jf813 於 2009-11-15 13:58 編輯

Wor, sales talk man!! For my TT I got my parts locally. NF my friend got it for the distributor in HK (Hobbyxxx). Tires I got them from oversea. We had 5 1/5 bikes in Yuen Long last night, 2 NF, 3 TT. It was so much fun I stay till 4:30am

BTW: We are playing again on Wednesday night start around 9pm. Feel free to join us. hehe

作者: EDI 時間: 2009-11-15 21:28
我今日巳經買了兩隻servo同9.5t motor...
但我在完全冇說明書下,都晤知d電孑野點裝...我星期三去搵你地,可否教吓我點裝嗎?尤其個break..毛蟲入手呀

作者: silvavisil 時間: 2009-11-16 00:08

Wor, sales talk man!! For my TT I got my parts locally. NF my friend got it for the distributor in HK (Hobbyxxx). Tires I got them from oversea. We had 5 1/5 bikes in Yuen Long last night, 2 NF, 3 ...
jf813 發表於 2009-11-15 13:56

登錄/註冊後可看大圖

John, 係咪打邊爐? 邊個帶先?電子爐?咁我帶變壓器啦.我架tt 啡令正左白色sticker la~ hehe. Looking forward on wednesday! 希望Andy快d正1/5活動人仔啦~期待x1000.

作者: jf813 時間: 2009-11-16 09:42
yaya, I will bring the 電子爐. you bring the 變壓器啦. And ask Andy to buy some food. Hehe. No problem edi. one ching have a 509 you can see his bike if anything is not clear. See you Wednesday.

作者: EDI 時間: 2009-11-16 10:58
共元朗邊鼠等呢?

作者: jf813 時間: 2009-11-16 13:14
本帖最後由 jf813 於 2009-11-16 13:20 編輯

http://bbs.rc-evo.com/viewthread ... page%3D1&page=1
You can see the location at page 1 second post. If you not sure where it is call me. I pm my number to you.

作者: EDI 時間: 2009-11-16 21:09
i just ask Nuova Faor ..they dont have menu too..$%^&*()_
can i put the esc like that?thx

作者: silvavisil 時間: 2009-11-17 00:59

i just ask Nuova Faor ..they dont have menu too..$%^&*()_
can i put the esc like that?thx
EDI 發表於 2009-11-16 21:09

登錄/註冊後可看大圖

yo bro, i don't have a NF, but i think you should take off the esc fan~otherwise the seats can't put properly!

作者: EDI 時間: 2009-11-17 07:33
OH REALLY~!THX SILVAVISIL~!
IF WITHOUT THAT FAN ,I WORRY OVER HEAT WOO....OR I NEED OTHER ESC

作者: jf813 時間: 2009-11-17 09:39
Can you just tape it onto the side of the main frame? Your bike is nice looking forward to see your bike soon.

作者: EDI 時間: 2009-11-17 13:32
唉!~ JF813!~你睇下我D SERVO....全部"擺"上去JAR...D SERVO HORN點裝我都未知呀...
有乜理由.盒未印好,說明書未有,咁都賣出街......
佢話一有說明書就會即刻SENT 比我......激鬼死....

作者: jf813 時間: 2009-11-18 00:21
don't worry. Lot of NF and we will sort it out tonight.

作者: silvavisil 時間: 2009-11-23 10:06

唉!~ JF813!~你睇下我D SERVO....全部"擺"上去JAR...D SERVO HORN點裝我都未知呀...
有乜理由.盒未印好,說明書未有,咁都賣出街......
佢話一有說明書就會即刻SENT 比我......激鬼死....
EDI 發表於 2009-11-17 13:32

登錄/註冊後可看大圖

上星期3為甚麼不來呀,大家都係超新手~especially me.今個星期3 JF813同我去橫州(元朗工業村) 玩電單車.

作者: EDI 時間: 2009-11-23 10:28
我喺大陸做野..d時間好Q煩....今個星期三幾點呢?

作者: EDI 時間: 2009-11-23 17:06
早前訂的包圍,,,

作者: jf813 時間: 2009-11-23 17:31
wor. Is that thing real carbon fiber!!! It is cool man. I ordered a 509 (only the cheap model)and will pick it up tomorrow. And Andy brought one too. Wednesday will start at around 9pm. Looking forward to see you.

BTW: We will go tonight too for more testing.

作者: EDI 時間: 2009-11-23 20:30
Yhea Is real carbon fiber....if I have time I will go to see u guys

作者: EDI 時間: 2009-11-23 20:31
I bought other two set tires too (soft)

作者: jf813 時間: 2009-11-25 10:08
We pickup 3 509 last night. Lot of 509 to play with you la. hehe BTW: Will have a 1/5 bike race on 13/12. Have time to race?

作者: EDI 時間: 2009-11-25 13:13

咁你地今晚係咪去元朗試車?

作者: jf813 時間: 2009-11-25 13:30
Ya, but not the 509's. Not finished building it yet. Will run my old TT tonight and 501, TTe, etc.

作者: ANGELZ 時間: 2009-11-26 14:54
本帖最後由 ANGELZ 於 2009-11-26 14:56 編輯

登錄/註冊後可看大圖

請問 EDI 這前叉是不是油壓避震器??感謝!!

作者: EDI 時間: 2009-11-26 15:34

係呀!~油壓生銹避震器!~以我所知!~大部份都係生銹

作者: silvavisil 時間: 2009-11-27 00:04
25/11/09 橫州 1:5 scale NF + FM-1e and n

作者: jf813 時間: 2009-11-27 10:03
Dear Angelz:

My friend got this front fork yesterday. Very very smooth. I am thinking about it too but it is kind of expensive... a little less than 200usd with upper and lower tripod. And it is very nice as the top cap is removable to chang the spring. BTW: it come with 2 extra spring with the kit. very nice. hehe

44# ANGELZ

作者: jf813 時間: 2009-11-27 10:05
Dear silvavisil:

Your phone is good man. The picture look very clear wor. hehe

46# silvavisil

作者: silvavisil 時間: 2009-11-27 15:35
Thx, hey, is that the fork which Mr.Porsche

is trying to sell it to me?!
Waitting for my carbon tt frame.

作者: ANGELZ 時間: 2009-11-27 16:13

Dear Angelz:

My friend got this front fork yesterday. Very very smooth. I am thinking about it too but it is kind of expensive... a little less than 200usd with upper and lower tripod. And it i ...
jf813 發表於 2009-11-27 10:03

登錄/註冊後可看大圖

Hi jf813,
上星期我的朋友買了一部 509 PRO 原廠前叉只有彈簧避震沒有油壓避震器 ....
不懂??

作者: jf813 時間: 2009-11-27 17:34
Really!!! Ya, from the picture in the NF web page the pro bike come with the normal fork. I have not seen Edi's bike yet. And the local shops don't have the pro bike in stock so I am not sure which one it comes with......

Hi jf813,
上星期我的朋友買了一部 509 PRO 原廠前叉只有彈簧避震沒有油壓避震器 ....
不懂??
ANGELZ 發表於 2009-11-27 16:13

登錄/註冊後可看大圖

作者: jf813 時間: 2009-12-7 10:04
Hello EDI: Try your bike yet. all our 509's are running already, and TT as well.

When will you come out and play?

作者: EDI 時間: 2009-12-7 16:22
係呀!~我放晒電子郢GAR LA..係個BREAK哥度唔係幾明點SET!~真係要搵日出黎請教下...

另保護架車兩邊哥兩條U字係邊度有得買呢?THX JF813

作者: jf813 時間: 2009-12-7 21:58
I will give you some next time. I got lots.

作者: EDI 時間: 2009-12-7 22:00
haha thxq jf813

作者: 馬田 時間: 2009-12-7 22:57
你地係嚮橫洲邊個停車場玩? 可以黎睇你地玩MA?

作者: jf813 時間: 2009-12-8 09:55
Please refer to the map, the parking lot beside the 污水處理廠. We play on Sat. and when we have time. But not sure about this Sat. as there will be a Race this Sunday at TRC for 1/5 bikes.

http://maps.google.com.hk/maps?f ... ll&sll=22.38131,114.168639&sspn=0.004563,0.006791&ie=UTF8&ll=22.4667,114.026606&spn=0.004561,0.006791&z=17

作者: hornethong 時間: 2010-1-3 03:00
本帖最後由 hornethong 於 2010-1-3 03:01 編輯

Hi C-hing, which one is selling by HobbyPro?

I only saw this one in KWS (photo copied from http://bbs.rc-evo.com/viewthread ... &extra=page%3D1):

登錄/註冊後可看大圖

作者: silvavisil 時間: 2010-1-3 04:32

Hi C-hing, which one is selling by HobbyPro?

I only saw this one in KWS (photo copied from http://bbs.rc-evo.com/viewthread.php?tid=155429&extra=page%3D1):
http://bbs.rc-evo.com/attachments/day_0 ...
hornethong 發表於 2010-1-3 03:00

登錄/註冊後可看大圖

c-hing, the 2nd one is the NF pro bike (carbon ver.)

作者: jf813 時間: 2010-1-3 11:37
They are both made by Nuova faor. The second one is the top of the line one. Hobby pro don't have it in stock (they only have the first one in stock) but you can ask the shop in KWS to order it for you. It will take around 1 month.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)