RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Any Associated 1/8 onroad rc series in HONG KONG [打印本頁]

作者: polarbear 時間: 2009-10-2 13:01
標題: Any Associated 1/8 onroad rc series in HONG KONG
Hello Associated rc 100 200 300 500 buddies,
please show up and share you associated 1/8 onroads with us, in particular those still exist in HONG KONG.

作者: aattaa 時間: 2009-10-2 14:45
已經買回來一段時間,今天清閒,可以執出來整理一吓....

作者: polarbear 時間: 2009-10-2 15:16
有沒有原居香港, 見証過馬場鑊+木方, 電梯膠 track 的Assoc "本地文物"呢?丟哂

作者: turbo997 時間: 2009-10-2 15:50
你去找章老餅啦

作者: siu 時間: 2009-10-2 15:56
唔知仲有無人有西松出嗰架 1:8 油車?

作者: camlchris 時間: 2009-10-2 16:11

已經買回來一段時間,今天清閒,可以執出來整理一吓....
aattaa 發表於 2009-10-2 14:45

登錄/註冊後可看大圖

Wow!!! It is beautiful !!!!!!!

作者: polarbear 時間: 2009-10-2 16:30
5# siu

Yes. Mr Wong machined it out from aluminium . I saw him feeling so proud of his work to his partner when completing the spur gear at his shop at To kwai wan someday. (also his clone 1/12's provided some less pricy support , especially on the elect. stuff to my 12E). I wonder if someone still keeps the design, it can be reborn somewhere in China

作者: polarbear 時間: 2009-10-2 16:31

你去找章老餅啦
turbo997 發表於 2009-10-2 15:50

登錄/註冊後可看大圖

Assoc was his opponent wow.

作者: polarbear 時間: 2009-10-2 16:51
Aattaa, I recall the Perry "jam jam carb" and it costed me a trophy at Shatin track

作者: aattaa 時間: 2009-10-2 18:04

Aattaa, I recall the Perry "jam jam carb" and it costed me a trophy at Shatin track
polarbear 發表於 2009-10-2 16:51

登錄/註冊後可看大圖

Perry "jam jam carb"....??我真係吾識呢個化油器喎...

早期的馬場賽事,好似係'福利'攪.是嗎?

作者: sport 時間: 2009-10-3 14:21
30 years old?

作者: polarbear 時間: 2009-10-5 10:34
本帖最後由 polarbear 於 2009-10-5 10:44 編輯

10# aattaa

Fok Lee led the Serpent team, Waigo had the Yoko Assoc. All the three major shops hoisted the races at Shatin. You needed to be club mambers of them to join the races. So I was member of World model and Waigo.

You see the Perry carb is rotory type , not the slide type with dust cover on the barrel. There were lots of innovative ideas to prevent dust but slide carb was the key. Slide carbs from Preston, Mccoy, Ops, Delta, PB, not to leave out the Japanese Mikuni were hot hop up....In addition, those L lever and spring make up the overriding machanism but the throttle servo was not strong enough to force through the jammed barrel.

作者: polarbear 時間: 2009-10-5 10:38

30 years old?
sport 發表於 2009-10-3 14:21

登錄/註冊後可看大圖

I think a lot of vintage rc cars got "killed" or srapped in Hong Kong due to 1997 migrations move on top of the normal growing up, study overseas, getting married, not enough family space etc problems.

作者: polarbear 時間: 2009-10-5 10:47
2# aattaa

I would suggest a decent Elfin Canam body will make it a good candidate in the our time passage.

作者: aattaa 時間: 2009-10-5 16:39
呢個殻果時比賽好似標準裝備似的....

作者: polarbear 時間: 2009-10-6 08:29
15# aattaa

Wow! Elfin gives high front bite and the rear wing provides adjustable rear down force. Steering of Rc 300 is neutral to a bit pushing , so need Elfin. On the other hand, the Delta has a more responsive dialing characteristic, so they use the MRP Spyder or something with lower profile.

作者: tiger1 時間: 2009-10-6 08:43
polar bear: you are right, I always remember the Delta bodies are more aggressive in the front end.

作者: camlchris 時間: 2009-10-6 13:49

15# aattaa

Wow! Elfin gives high front bite and the rear wing provides adjustable rear down force. Steering of Rc 300 is neutral to a bit pushing , so need Elfin. On the other hand, the Delta h ...
polarbear 發表於 2009-10-6 08:29

登錄/註冊後可看大圖

Spyder Body like this !!!!

作者: blueray 時間: 2009-10-6 14:33
wOw, A lot buddies have great collections. Great history.

作者: camlchris 時間: 2009-10-6 23:32
標題: RE: Any Associated 1/8 onroad rc series in HONG KONG
本帖最後由 camlchris 於 2009-10-7 04:30 編輯

Great old bodies

作者: tiger1 時間: 2009-10-7 08:40
Camlchris: this cityhobby body is fantastic!! What an art.

作者: benli46 時間: 2009-10-7 21:07
I'm prefer 1／8 parma/budweiser., 型！

作者: 回答 時間: 2009-10-10 23:47
i dumped mine delta super J long time ago, i regret a lot.

作者: winson.. 時間: 2009-10-11 14:23
西松架油車可推着車架

作者: amadeus3408 時間: 2009-10-12 10:02
真是一部好車

作者: chiwingedwinlo 時間: 2010-1-7 11:45
I looking for this shell................Can I own !

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)