標題: YR for Tamiya F103 Hop Ups Parts feature & tips [打印本頁] 作者: Dinballian 時間: 2009-6-5 15:54 標題: YR for Tamiya F103 Hop Ups Parts feature & tips Yeah Racing New & Unique Design Hop Ups Parts
The Yeah Racing (#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver Set (1,2,3 deg) (BK) for Tamiya F103RM
1. The camber could be set in 3 different angles (-1°, -2°, -3°) with the installation of the 3 particular camber uprights included in the Yeah Racing Aluminum Knuckle Arm & Servo Saver Set.
Tips
<-1°,-2°&-3° Camber>
Camber affects the car’s traction. Generally more negative (inward) camber means increased grip since the side-traction of the wheel increases.
Adjust front camber so that the front tires wear flat.
2. The length of the Aluminum Front Knuckle Arm is adjustable in order to set up different toe-in and toe-out angles of the wheel.
Tips
Increased (more toe-in)
‧ Increases understeer (decreases oversteer).
‧ Decreases steering at corner entry.
‧ Increases “nervousness.”
‧ Makes car more difficult to drive.
Decreased (more toe-out)
‧ Decreases understeer (increases oversteer).
‧ Increases steering at corner entry.
‧ Increases straight-line stability.
‧ Makes car easier to drive.
3. An extra O-Ring would adjust the chassis in a higher or lower height.
*Picture demonstrating the chassis in different height by adjusting the O-ring.
Furthermore, the Yeah Racing Knuckle Arm is made of black aluminum which light weight the chassis. The specific designed servo saver enhances the strength of the chassis. This feature also increases the strength of holding up the saver to provide a more accurate turn angle in cornering. With this stylishly designed Upright Set, the F1 chassis looks more outstanding, compared with other similar products in the market.
Where to buy?
(#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver Set (1,2,3 deg) (BK)
The Yeah Racing (#F103RM-021BK) Aluminum Ball Battery Mount is made of a single piece aluminum. The single piece design could efficiently increases the strength of the F1 chassis but light in weight. The pivot ball is the key feature of the battery mount which allow the T-plate to tweak smoothly in order to gain a better handling and grip. For advance setting, there are 2 tweak screws on the battery mount for chassis balancing adjustment. This battery mount is prefect fit for the square / round hard case Li-Po battery or normal stick pack.
The Yeah Racing (#F103RM-021BK) Aluminum Ball Battery Mount is suitable for Tamiya F103 RM / F103GT / F103 (15th Anniversary)
For the TamiyaF103 chassis have released another rear end suspension solution following up from their floating solution released last month. The new 2mm FRP Suspension set works with the F103RM and adds a very precise pivoting connection between the t-bar and single piece rear motor mount. The system is connected by bearings so the up and down action is now very precise and doesn’t effect the twist of the t-bar.
Description:
This is the Aluminum + 2mm FRP Suspension Set (BK) for Tamiya F103RM
Aluminum Damper Set (BK) for Tamiya F103 Series / F104 Pro
Description:
# This is the Yeah Racing (#F103RM-020BK) Aluminum Damper Set (BK) for Tamiya F103RM/F103GT/F103 15th Anniversary/F104 Pro.
Feature:
# For: Tamiya F103RM/F103GT/F103 15th Anniversary/F104 Pro
# Material: Aluminum
# Color: Black
Tips:-The Yeah Racing Damper Set contains 2 dampers. The remain damper for spare use or use different damper oil to let more short time to get the better set- up.
Include:
# Damper (2 Pcs)
# Soft Spring (Black) (2 Pcs)
# Hard Spring (Blue) (2 Pcs)
# Medium Spring (Silver) (2 Pcs)
# Pillow Ball (2 Pcs)
# Ball Nut (2 Pcs)
# 3 x 16mm Flat Hex Screw (2 Pcs)
# 3 x 16mm Round Hex Screw (2 Pcs)
# 3 x 9mm Flat Hex Screw (2 Pcs)
# Pistons in 1-Hole (2 Pcs)
# Pistons in 3-Hole (2 Pcs)
*Please click the image below to download the F103RM-020BK Manual
