RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 塑膠染色..... [打印本頁]

作者: crunch 時間: 2006-6-1 20:06
標題: 塑膠染色.....
Check out these wheels and wing that I dyed black.

Thanks to Brother Mike for ordering these wheels for me...

1) Wash the wheels with dish washing liquid, this will ensure the color attaching to the plastic as deep as it could and evenly.

作者: crunch 時間: 2006-6-1 20:08
This is the dye powder I use for the coloring. I bought this at a stationary story, many other different colors are available.

Prepare a LARGE pot of water and bring it to a boil.

作者: crunch 時間: 2006-6-1 20:11
While the water boils, prepare the plastic with metal wire or anything you can use to get the parts in and out of the water.

De-solve the powder in the water and make sure it's all melted and turn off the heat.

Put in plastic parts and leave it in there for at least 4 hours. I left the wheels in there overnight to ensure the black is as black as it can get.

作者: crunch 時間: 2006-6-1 20:11
The final product!!!

作者: D1仔 時間: 2006-6-1 20:15
染得好靚牙~易唔易甩牙D色~

作者: ice1234 時間: 2006-6-1 20:15
so good , where ｃａｎ i buy it?
thx

作者: crunch 時間: 2006-6-1 20:16
甩色? No way.....

The color is soaked in the plastic and it will should NEVER fade.

作者: andrewlio 時間: 2006-6-1 20:16
good wo...

質素唔錯!!! total 用左幾多銀?!?!

作者: WTO 時間: 2006-6-1 20:16

原帖由 crunch 於 2006-6-1 20:11 發表
The final product!!!

好似原裝啤出來....正

要幾多升水 : 1 dye powder ?

作者: crunch 時間: 2006-6-1 20:23
I bought the dye powder in Mong Kok, the stationary store right around the corner of Tong Choi Street and dundas street.

The powder is very cheap if I remember correctly....I bought it a LONG time ago lu...

I just used enough water to cover the plastic parts.....never really measured the amount.

作者: WTO 時間: 2006-6-1 20:25

原帖由 crunch 於 2006-6-1 20:23 發表
I bought the dye powder in Mong Kok, the stationary store right around the corner of Tong Choi Street and dundas street.

The powder is very cheap if I remember correctly....I bought it a LONG t ...

got it .thanks

作者: ice1234 時間: 2006-6-1 20:26
染得好靚

作者: crunch 時間: 2006-6-1 20:27

原帖由 ice1234 於 2006-6-1 20:26 發表
染得好靚

Thank you Thank you

作者: WTO 時間: 2006-6-1 20:28
電磁爐應較幾多度火煲4小時 ?

作者: crunch 時間: 2006-6-1 20:32
Oh...nonono....

Once the powder is fully melted, I removed it from the heat and let it sit.......

作者: DC-5 時間: 2006-6-1 20:33
你做少左一樣野

作者: WTO 時間: 2006-6-1 20:33

原帖由 crunch 於 2006-6-1 20:32 發表
Oh...nonono....

Once the powder is fully melted, I removed it from the heat and let it sit.......

ok..ok....thx

作者: crunch 時間: 2006-6-1 20:35

原帖由 DC-5 於 2006-6-1 20:33 發表
你做少左一樣野

Oh?? What did I miss?

作者: DC-5 時間: 2006-6-1 20:41
落盬呀

作者: crunch 時間: 2006-6-1 20:44
落盬 ?? Can you please tell me why?

作者: slau01b 時間: 2006-6-1 20:59
你做少左一樣野.........你唔記得幫我整埋....。

作者: Skyline 時間: 2006-6-1 22:13

原帖由 crunch 於 2006-6-1 20:44 發表
落盬 ?? Can you please tell me why?

Brother, the color water still at your home right??

作者: crunch 時間: 2006-6-1 22:59
not anymore my friend......u have something you want to dye??

I can do for you ga~~

作者: 好立克 時間: 2006-6-3 17:47

原帖由 DC-5 於 2006-6-1 20:41 發表
落盬呀

仲有野未落呀

海鮮湯底包

作者: 127937499 時間: 2006-6-3 19:02

原帖由 好立克 於 2006-6-3 17:47 發表

仲有野未落呀

海鮮湯底包

加多包烏冬

作者: 好立克 時間: 2006-6-3 19:06

原帖由 127937499 於 2006-6-3 19:02 發表

加多包烏冬

叫埋D親戚開餐

作者: barrypops 時間: 2006-6-27 11:09
請問師兄在那裡買此染料呢？

而比例又如何呢（一盒要開多少水)？

THX

作者: hc1309 時間: 2006-6-27 11:13
soak for how long?
over nite?

作者: karhey 時間: 2006-6-27 11:17
>>>>>Put in plastic parts and leave it in there for at least 4 hours. I left the wheels in there overnight to ensure the black is as black as it can get.

作者: 雷公 時間: 2006-6-27 19:00

原帖由 barrypops 於 2006-6-27 11:09 發表
請問師兄在那裡買此染料呢？

而比例又如何呢（一盒要開多少水)？

THX

響兆萬對面咪有間文具店既﹐咪就係果間囉﹐最頂層﹐22蚊一舊
西洋菜街尾呀

作者: hc1309 時間: 2006-6-28 10:00

原帖由 karhey 於 2006-6-27 11:17 AM 發表
>>>>>ut in plastic parts and leave it in there for at least 4 hours. I left the wheels in there overnight to ensure the black is as black as it can get.

Oh yea~~
I was @_@
sorry~~

作者: barrypops 時間: 2006-6-28 11:53

原帖由雷公於 2006-6-27 19:00 發表

響兆萬對面咪有間文具店既﹐咪就係果間囉﹐最頂層﹐22蚊一舊
西洋菜街尾呀

Thanks ! 師兄 !

作者: crunch 時間: 2006-6-29 22:41
Sorry I didn't reply....I have been very busy and haven't been browsing the site.....

Sorry Sorry

作者: barrypops 時間: 2006-7-1 14:59

原帖由 crunch 於 2006-6-29 22:41 發表
Sorry I didn't reply....I have been very busy and haven't been browsing the site.....

Sorry Sorry

Not a problem !

But would please to tell me ..what are the ratio about water & dye ?

Thanks !

作者: crunch 時間: 2006-7-1 23:31
Ummm....I never really paid attention to that. I just used one big pot of water and I can of dye.

作者: barrypops 時間: 2006-7-2 01:40

原帖由 crunch 於 2006-7-1 23:31 發表
Ummm....I never really paid attention to that. I just used one big pot of water and I can of dye.

Thanks ! brother !

作者: 雷公 時間: 2006-7-2 02:24

原帖由 barrypops 於 2006-7-1 14:59 發表

Not a problem !

But would please to tell me ..what are the ratio about water & dye ?

Thanks !

好似好立克甘樣沖就得架喇
不過最近要唔係太“杰”﹐如果唔係會無甘勻循
“欺”得濟就無甘上色﹐但都有得補救

作者: barrypops 時間: 2006-7-2 02:54
Thanks so much

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)