RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 分享下你架mini-z 呀 [打印本頁]

作者: isaacleeaa 時間: 2009-2-22 12:00
標題: 分享下你架mini-z 呀
改左
___________________________
前珠差
全身bearing
前彈弓
前杯2度
狗骨
頭尺
金屬中軸
金屬中軸固定座
前金屬cover
金屬motor齒
金屬電cover
+FET
天線
金屬MOTOR COVER
STOCK R MOTOR
後KYOSHO珠差
後SAS

作者: billy86che 時間: 2009-2-22 13:10
OK.
Here is one of mine.

作者: magiceye 時間: 2009-2-22 16:10
嘩! 師兄, 架車好勁, 係唔係攞o左MR02個底黎改? 個頭改o左乜? 有冇多D相睇?

作者: isaacleeaa 時間: 2009-2-22 16:14
What motor you use?

作者: billy86che 時間: 2009-2-22 22:15
Here are some more photos. Forgive the dust.

作者: billy86che 時間: 2009-2-22 22:17
Other shots.

作者: magiceye 時間: 2009-2-22 22:31
嘩! 師兄, 架車咁闊, 有乜殼啱裝?

作者: billy86che 時間: 2009-2-22 22:35

原帖由 magiceye 於 2009-2-22 22:31 發表

 登錄/註冊後可看大圖

嘩! 師兄, 架車咁闊, 有乜殼啱裝?

I am using AE86.

作者: scalpel 時間: 2009-2-22 22:52

原帖由 billy86che 於 2009-2-22 22:17 發表

 登錄/註冊後可看大圖

Other shots.

真係嘆為觀止

，Billy兄我想問下你個kyosho 尾珠叉杯兩邊會唔會被狗骨整蝕？有無方法解決？

作者: billy86che 時間: 2009-2-22 22:52
Check these.

作者: magiceye 時間: 2009-2-22 23:03
呢位師兄真係好有心機, 連個殼都改得咁勁. 我都有個86殼, 因為裝唔到闊呔, 所以只用黎玩漂移.

作者: billy86che 時間: 2009-2-22 23:15

原帖由 scalpel 於 2009-2-22 22:52 發表

 登錄/註冊後可看大圖

真係嘆為觀止，Billy兄我想問下你個kyosho 尾珠叉杯兩邊會唔會被狗骨整蝕？有無方法解決？

I am now using original plastic u-joints in all my cars. Unlike what many people think, they are actually very reliable and durable, provided that you know how to adjust and maintain your differential. Anything like gear differential, one-way or even tighter ball differential should be avoided.

[ 本帖最後由 billy86che 於 2009-2-23 23:00 編輯 ]

作者: scalpel 時間: 2009-2-22 23:23

原帖由 billy86che 於 2009-2-22 23:15 發表

 登錄/註冊後可看大圖

I am now using original plastic u-joints in all my cars. Unlike what many people think, they are actually very reliable and durable, provided that you know how to adjust and maintain your differen ...

But if using original plastic u-joints, will it be less power transferred onto the wheels?

作者: billy86che 時間: 2009-2-22 23:30

原帖由 scalpel 於 2009-2-22 23:23 發表

 登錄/註冊後可看大圖

But if using original plastic u-joints, will it be less power transferred onto the wheels?

It matters very little because of this small scale. Try it yourself to see if you can feel the difference.

[ 本帖最後由 billy86che 於 2009-2-23 13:39 編輯 ]

作者: scalpel 時間: 2009-2-22 23:35

原帖由 billy86che 於 2009-2-22 23:30 發表

 登錄/註冊後可看大圖

It matters very little because of this small scale. Try it yourself if you can feel the difference.

Alright, thanks for your advice, I will have a go!

作者: 2slow 時間: 2009-2-22 23:49
hi billy, I notice u are using the new Atomic tyres, so any comment on it?

作者: billy86che 時間: 2009-2-22 23:54

原帖由 2slow 於 2009-2-22 23:49 發表

 登錄/註冊後可看大圖

hi billy, I notice u are using the new Atomic tyres, so any comment on it?

I tried 6 or 7 packs of battery at M?S only yesterday. 20 for front and 10 for rear. It was cool. I made a record of 10.1?? a lap. I had never been able to do that with a 86 previously when I was using other tyres.

[ 本帖最後由 billy86che 於 2009-2-22 23:55 編輯 ]

作者: scalpel 時間: 2009-2-23 00:01

原帖由 billy86che 於 2009-2-22 23:54 發表

 登錄/註冊後可看大圖

I tried 6 or 7 packs of battery at M?S only yesterday. 20 for front and 10 for rear. It was cool. I made a record of 10.1?? a lap. I had never been able to do that with a 86 previously when I was ...

Better grip than the normal ATM tires?

作者: billy86che 時間: 2009-2-23 00:03

原帖由 scalpel 於 2009-2-23 00:01 發表

 登錄/註冊後可看大圖

Better grip than the normal ATM tires?

Yes. The V pattern 20 is better than the block threaded 20, while the v 10 better than the block threaded 10, in whichever running direction.

作者: 2slow 時間: 2009-2-23 00:12

原帖由 billy86che 於 2009-2-22 23:54 發表

 登錄/註冊後可看大圖

I tried 6 or 7 packs of battery at M?S only yesterday. 20 for front and 10 for rear. It was cool. I made a record of 10.1?? a lap. I had never been able to do that with a 86 previously when I was ...

Cool~ when are u going to M?S again... lets have some fun together~

anyway, how many packs of battery will it last..?

作者: -69- 時間: 2009-2-23 03:14
Wooooo ! Very Very nice

e..裝左計時用的sender?

[ 本帖最後由 -69- 於 2009-2-23 03:19 編輯 ]

作者: billy86che 時間: 2009-2-23 08:12

原帖由 2slow 於 2009-2-23 00:12 發表

 登錄/註冊後可看大圖

Cool~ when are u going to M?S again... lets have some fun together~

anyway, how many packs of battery will it last..?

Are you talking about the chassis? I have been playing with it for 9 months. (6 to 7 packs refer to the new tyres.)
I usually go there on Fri night. Come please.

[ 本帖最後由 billy86che 於 2009-2-23 08:13 編輯 ]

作者: LokSpec 時間: 2009-2-23 22:03

原帖由 billy86che 於 2009-2-22 22:35 發表

 登錄/註冊後可看大圖

I am using AE86.

請問尾闊軨是0 offset?

作者: billy86che 時間: 2009-2-23 22:25

原帖由 LokSpec 於 2009-2-23 22:03 發表

 登錄/註冊後可看大圖

請問尾闊軨是0 offset?

-1 offset

作者: scalpel 時間: 2009-2-24 03:10

原帖由 billy86che 於 2009-2-23 22:25 發表

 登錄/註冊後可看大圖

-1 offset

Never see -1 offset before!

作者: billy86che 時間: 2009-2-24 08:08

原帖由 scalpel 於 2009-2-24 03:10 發表

 登錄/註冊後可看大圖

Never see -1 offset before!

I have it DIY.

作者: 2slow 時間: 2009-2-24 09:53

原帖由 billy86che 於 2009-2-24 08:08 發表

 登錄/註冊後可看大圖

I have it DIY.

cool~ have you tried DIY the MR02 rims for AWD use?? coz I got some really cool MR02 rims...

作者: billy86che 時間: 2009-2-24 11:00

原帖由 2slow 於 2009-2-24 09:53 發表

 登錄/註冊後可看大圖

cool~ have you tried DIY the MR02 rims for AWD use?? coz I got some really cool MR02 rims...

That is more possible only if you plan to make wheels with positive offset, not a negative one.

作者: piano 時間: 2009-2-25 00:31

原帖由 billy86che 於 2009-2-22 22:17 發表

 登錄/註冊後可看大圖

Other shots.

Very ugly,dirty,nasty and silly

作者: billy86che 時間: 2009-2-25 10:35

原帖由 piano 於 2009-2-25 00:31 發表

 登錄/註冊後可看大圖

Very ugly,dirty,nasty and silly

Thanks for your comments.

By the way, I've asked about the Hi-8 for you. We have only VHS for making into CD/DVD... so if you can go to Ngap Liu Street to buy an adaptor (Hi-8 to VHS), I can help you duplicate it into whatever you want.

作者: billy86che 時間: 2009-2-25 10:52

原帖由 piano 於 2009-2-25 00:31 發表

 登錄/註冊後可看大圖

Very ugly,dirty,nasty and silly

I agree with what you said. It is exactly like my friend who is called, let me see... Ah Ken who is very ugly if you talk about his appearance but inside he is gentle and kkkkkkkind-hhhhhhearted. This is a story telling us not just to look at somebody's or something's appearance.

作者: piano 時間: 2009-2-25 16:41

原帖由 billy86che 於 2009-2-25 10:35 發表

 登錄/註冊後可看大圖

Thanks for your comments.

By the way, I've asked about the Hi-8 for you. We have only VHS for making into CD/DVD... so if you can go to Ngap Liu Street to buy an adaptor (Hi-8 to VHS), I can he ...

Thanks! I got it.

作者: piano 時間: 2009-2-25 16:45

原帖由 billy86che 於 2009-2-25 10:52 發表

 登錄/註冊後可看大圖

I agree with what you said. It is exactly like my friend who is called, let me see... Ah Ken who is very ugly if you talk about his appearance but inside he is gentle and kkkkkkkind-hhhhhhearted. ...

Yeah !!! Same as my other friend whom is very ugly and lusty too.....but inside he is very soft....never stiff

作者: ganboy 時間: 2009-2-25 17:21

原帖由 piano 於 2009-2-25 16:45 發表

 登錄/註冊後可看大圖

Yeah !!! Same as my other friend whom is very ugly and lusty too.....but inside he is very soft....never stiff

so sad....never stiff
do I know your "other friend"?

作者: piano 時間: 2009-2-25 22:56

原帖由 ganboy 於 2009-2-25 17:21 發表

 登錄/註冊後可看大圖

so sad....never stiff
do I know your "other friend"?

Yes! Of course! He always run his AE86. His AE86 is very fast but...........still very soft....never stiff....therefore we all call him Soft Old Lion

作者: samy 時間: 2009-2-25 23:35
9XII backlight project..................

作者: samy 時間: 2009-2-25 23:37
i knew a people who call lion but not old wor.

作者: piano 時間: 2009-2-26 02:46

原帖由 samy 於 2009-2-25 23:35 發表

 登錄/註冊後可看大圖

9XII backlight project..................

The guy replied already. He charged for US$60 for all the necessary parts, instruction manual and postal, what do you think? Should we take the risk? Caused we need to pay in advance by Paypal.

作者: billy86che 時間: 2009-2-26 10:34
getting off-topic......

I guess there is another area for helicopters.

[ 本帖最後由 billy86che 於 2009-2-26 10:44 編輯 ]

作者: piano 時間: 2009-2-26 21:10

原帖由 billy86che 於 2009-2-26 10:34 發表

 登錄/註冊後可看大圖

getting off-topic......

I guess there is another area for helicopters.

I'm very sorry. You are right, we should not off-topic. Let's talk about soft old lion again

作者: billy86che 時間: 2009-2-26 23:00

原帖由 piano 於 2009-2-26 21:10 發表

 登錄/註冊後可看大圖

I'm very sorry. You are right, we should not off-topic. Let's talk about soft old lion again

But we can still chat on something half relevant. For example, Can someone use the 9XII to control a mini-z? Please share your photos.

:hug: :hug:

作者: isaacleeaa 時間: 2009-2-26 23:13
please all share your photo la.

作者: 800mah 時間: 2009-3-1 00:22
mr02-LM
front: low ride height hard springs, 2deg, +1offset, ATM 10deg, 0-toe
rear: 3R LM pod, 3R DPS, 3R 10-ball diff, 0offset, ATM Ti-shaft, ATM 10deg, soft T-plate
power: original 2.4g no modify, AD-stock motor
body: Enzo Ferrari

作者: 800mah 時間: 2009-3-1 00:25
mr02-MM
front: low ride height hard springs, 2deg, -0.5offset, ATM 10deg, 0-toe
rear: ATM MM pod, ATM DPS, kyosho ball diff, 0offset, 3R Ti-shaft, ATM 10deg, mid T-plate
power: original 2.4g no modify, Stock motor
body: McLaren F1 street ver.

作者: 800mah 時間: 2009-3-1 00:28
mr015-MM
front: original springs, 2deg, 0offset, soft foams, 1 deg-toe out
rear: ATM 94mm pod, ATM DPS + derlin disc, kyosho ball diff, 0offset, 3R Ti-shaft, soft foams, hard T-plate
power: original 2.4g no modify, kyosho Xspeed motor
body: Altezza

作者: 800mah 時間: 2009-3-1 00:33
Overland
wheelbase: 105mm, 2-A position
damper: original damper with kyosho #30000 diff gear grease, GPM shock towers
power: original 2.4g no modify, kyosho X-speed motor
body: Land Cruiser (extend front wheel well)

作者: 800mah 時間: 2009-3-1 00:35
AWD - drift car
tires: ATM F+R
power: original 2.4g no modify, kyosho Xspeed motor
body: R34 street

作者: 800mah 時間: 2009-3-1 00:48
some more... two modded chasis without PCB

作者: bidforfuns 時間: 2009-3-1 14:20
標題: My Mini Z: MR01 MR02RM MR02MM AWD
My Mini Z: MR01 MR02RM MR02MM AWD

作者: bidforfuns 時間: 2009-3-1 14:21
標題: My MR01
My MR01

作者: bidforfuns 時間: 2009-3-1 14:23
標題: My MR02RM
My MR02RM

作者: bidforfuns 時間: 2009-3-1 14:40
標題: My AWD
My AWD

作者: SpaceBoy 時間: 2009-3-1 23:38

原帖由 800mah 於 1-3-2009 12:28 AM 發表

 登錄/註冊後可看大圖

mr015-MM
front: original springs, 2deg, 0offset, soft foams, 1 deg-toe out
rear: ATM 94mm pod, ATM DPS + derlin disc, kyosho ball diff, 0offset, 3R Ti-shaft, soft foams, hard T-plate
power: origina ...

唔好意思~off topic 一問

c兄~ d foam呔係邊到買架~?
thx

作者: isaacleeaa 時間: 2009-3-1 23:50
good!!thanks for sharing

作者: miniz 時間: 2009-3-2 00:54
wah now all people chnage ja to play AWD la
no more people to play Mr02 lu

作者: bidforfuns 時間: 2009-3-2 09:12
標題: My MR02MM
My MR02MM

[ 本帖最後由 bidforfuns 於 2009-3-2 21:44 編輯 ]

作者: bidforfuns 時間: 2009-3-2 22:40
標題: My AWD
AWD

作者: isaacleeaa 時間: 2009-3-2 22:40
標題: 回復 49# 的帖子
hey,what motor you use in the overland

作者: isaacleeaa 時間: 2009-3-2 22:43
今日入手

作者: 800mah 時間: 2009-3-2 23:21

原帖由 isaacleeaa 於 2009-3-2 22:40 發表

 登錄/註冊後可看大圖

hey,what motor you use in the overland

just an Xspeed with bearing case installed, nothing special~

作者: 800mah 時間: 2009-3-2 23:33
the whole fleet...

作者: isaacleeaa 時間: 2009-3-2 23:39
setting the overland......

作者: isaacleeaa 時間: 2009-3-2 23:41
which 避震 you prefer the best?(overland)

作者: 800mah 時間: 2009-3-2 23:49

原帖由 isaacleeaa 於 2009-3-2 23:41 發表

 登錄/註冊後可看大圖

which 避震 you prefer the best?(overland)

best... of coz kyosho oil shock la~ but they're sooooo expensive.

so you can buy some really heavy diff gear grease and lube it onto the stock pistons.

it works !!
i use kyosho #30000 diff gear grease.

作者: 800mah 時間: 2009-3-2 23:52
and bear in mind Overland / monster are just for light offroading, don't attempt to let it fall from hieght,
something will break for sure.

作者: isaacleeaa 時間: 2009-3-3 00:06
how about the 3 racing?i saw $120 for 4shock,and it is make of tan too,

and i want to know where cani buy 30000 diff gear grease?thanks

作者: 800mah 時間: 2009-3-3 21:53

原帖由 isaacleeaa 於 2009-3-3 00:06 發表

 登錄/註冊後可看大圖

how about the 3 racing?i saw $120 for 4shock,and it is make of tan too,

and i want to know where cani buy 30000 diff gear grease?thanks

that one is okay too, u can see i have that on one of my overland, but it leaks slowly, i'm thinking of putting diff gear grease inside the 3R oil shock

作者: isaacleeaa 時間: 2009-3-3 23:09
oh,thanks you suggestion,but between kyosho x-speed motor and atm stock motor,who is better for overland?

and what is the rpm of x-speed motor?thanks

作者: paulpoon306 時間: 2009-3-3 23:46
前後kyosho珠差
全身bearing
前彈弓
前後杯1.5kyosho度
狗骨
頭尺
金屬中軸
金屬中軸固定座
前金屬cover
金屬motor齒
+FET
天線
金屬MOTOR COVER
手繞MOTOR
ad brand

作者: isaacleeaa 時間: 2009-3-7 17:40
more
hummer overland

x-speed motor
bearings
3-racing油壓備震

[ 本帖最後由 isaacleeaa 於 2009-3-7 17:44 編輯 ]

作者: isaacleeaa 時間: 2009-3-7 17:41
monster!

ATM STOCK motor
Tires
overland spring

[ 本帖最後由 isaacleeaa 於 2009-3-7 17:46 編輯 ]

作者: Wayne~~ 時間: 2009-3-7 22:11
MINI-Z AWD X2
MINI-Z Monster X 2

作者: isaacleeaa 時間: 2009-3-7 22:24
標題: 回復 73# 的帖子
哇，你部monster起冰度買全金屬>>?good

作者: Wayne~~ 時間: 2009-3-7 22:43

原帖由 isaacleeaa 於 2009-3-7 22:24 發表

 登錄/註冊後可看大圖

哇，你部monster起冰度買全金屬>>?good

五金鋪囉~
http://www.gpmracing.com.hk/catalog/index.php

作者: isaacleeaa 時間: 2009-3-8 11:28
哦,how much you spend it?

作者: Wayne~~ 時間: 2009-3-9 20:47

原帖由 isaacleeaa 於 2009-3-8 11:28 發表

 登錄/註冊後可看大圖

哦,how much you spend it?

忘記得一乾二靜

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)