RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想請問單向等唔等於直軸 ? [打印本頁]

作者: natnatbobo 時間: 2009-1-19 11:35
標題: 想請問單向等唔等於直軸 ?
想請問各位 c兄單向等唔等於直軸呢 ? 因我有兩個單向, 咁樣裝前後得唔得呢 ? 係唔係裝單向會好飄 D 呢 ? thx !!

作者: scalpel 時間: 2009-1-19 12:14

原帖由 natnatbobo 於 2009-1-19 11:35 發表

 登錄/註冊後可看大圖

想請問各位 c兄單向等唔等於直軸呢 ? 因我有兩個單向, 咁樣裝前後得唔得呢 ? 係唔係裝單向會好飄 D 呢 ? thx !!

They are different! 直軸 just like a shaft for L & R wheel......both wheels move at the same direction at the same time!

作者: billy86che 時間: 2009-1-19 14:44
What a brand new idea it is to put one-way axle in both front and rear bulkhead! But is the running direction correct if you put it in the rear???

Also, it will be difficult for you to stop the car.

[ 本帖最後由 billy86che 於 2009-1-19 14:46 編輯 ]

作者: scalpel 時間: 2009-1-19 14:51

原帖由 billy86che 於 2009-1-19 14:44 發表

 登錄/註冊後可看大圖

What a brand new idea it is to put one-way axle in both front and rear bulkhead! But is the running direction correct if you put it in the rear???

Also, it will be difficult for you to stop the c ...

The wheel will be the same direction if you put the 直軸 on rear, actually this setting is for drifting only, and it has no problem for stopping the AWD.

作者: billy86che 時間: 2009-1-19 15:12

原帖由 scalpel 於 2009-1-19 14:51 發表

 登錄/註冊後可看大圖

The wheel will be the same direction if you put the 直軸 on rear, actually this setting is for drifting only, and it has no problem for stopping the AWD.

I guess he is asking about one-way, not solid axle. "Same direction"? U sure?

作者: scalpel 時間: 2009-1-19 15:17

原帖由 billy86che 於 2009-1-19 15:12 發表

 登錄/註冊後可看大圖

I guess he is asking about one-way, not solid axle. "Same direction"? U sure?

I mean the solid axle will be in same direction!

作者: billy86che 時間: 2009-1-19 15:22

原帖由 scalpel 於 2009-1-19 15:17 發表

 登錄/註冊後可看大圖

I mean the solid axle will be in same direction!

I know. But he was asking whether he can use 2 one-way axles on the same chassis according to what I interpreted.

This was his line: "因我有兩個單向, 咁樣裝前後得唔得呢 ? "

[ 本帖最後由 billy86che 於 2009-1-19 15:23 編輯 ]

作者: natnatbobo 時間: 2009-1-19 15:30

原帖由 billy86che 於 2009-1-19 15:22 發表

 登錄/註冊後可看大圖

I know. But he was asking whether he can use 2 one-way axles on the same chassis according to what I interpreted.

This was his line: "因我有兩個單向, 咁樣裝前後得唔得呢 ? "

let me try and see see....

作者: billy86che 時間: 2009-1-19 15:40
Let me clarify:

If you put 2 one-way axles on the same car without modification, it becomes a FWD but it can still stop by the rear wheels.

If you modify the one-way axle in the rear so it aligns with running the direction of the front, it becomes a non-stopable AWD and you will find that it can't reverse.

It sounds interesting, isn't it?

[ 本帖最後由 billy86che 於 2009-1-19 15:42 編輯 ]

作者: natnatbobo 時間: 2009-1-19 15:53

原帖由 billy86che 於 2009-1-19 15:40 發表

 登錄/註冊後可看大圖

Let me clarify:

If you put 2 one-way axles on the same car without modification, it becomes a FWD but it can still stop by the rear wheels.

If you modify the one-way axle in the rear so it align ...

thx for your info, may be i make it clear...my point is or my question is "whether after i make this arrangement, i can drift better, i dont care whether the car can reverse or not" ???

作者: 800mah 時間: 2009-1-19 20:14

原帖由 natnatbobo 於 2009-1-19 11:35 發表

 登錄/註冊後可看大圖

想請問各位 c兄單向等唔等於直軸呢 ? 因我有兩個單向, 咁樣裝前後得唔得呢 ? 係唔係裝單向會好飄 D 呢 ? thx !!

叫得頭單...就梗係for 頭only

作者: 800mah 時間: 2009-1-19 20:18

原帖由 natnatbobo 於 2009-1-19 15:53 發表

 登錄/註冊後可看大圖

thx for your info, may be i make it clear...my point is or my question is "whether after i make this arrangement, i can drift better, i dont care whether the car can reverse or not" ???

whether the car can go reverse or not is not crucial here, what billy86che is saying is....
your can will not be able to STOP if u put one way tubes in both front & rear

even if the motor stops spinning, brakes, going reverse or even jammed, your car will still move forward, does this sound like drifting to you?

作者: natnatbobo 時間: 2009-1-19 20:33

原帖由 800mah 於 2009-1-19 20:18 發表

 登錄/註冊後可看大圖

whether the car can go reverse or not is not crucial here, what billy86che is saying is....
your can will not be able to STOP if u put one way tubes in both front & rear

even if the motor stop ...

thx all bros, btw, while i tried to put the 單向 at rear, i realised that the direction goes backward...that means, the 單向 i put in front could only goes forward, and the 單向 i put at rear could only goes backward, both opposite direction, haaaaaaa

, dont work

作者: 800mah 時間: 2009-1-19 21:04
標題: 回復 13# 的帖子
that's becoz 頭單 is 頭單, u'll need a "尾單" to complete what u were thinking of.

作者: 謙v3v 時間: 2009-1-19 22:36
咁如果想買頭單應該買atm定kyosho定其他牌子呢?
同埋想問問頭單後面配咩最好drift?
因為聽人講頭單配尾直靜係甩到一d細灣
大灣好難甩?係咪真架呢?
因為我宜家用緊頭尾直(頭尾都係牙差拎tempo塞住)
想試下換枝頭單

作者: 椰禮 時間: 2009-1-20 04:14

原帖由 謙v3v 於 2009-1-19 22:36 發表

 登錄/註冊後可看大圖

咁如果想買頭單應該買atm定kyosho定其他牌子呢?
同埋想問問頭單後面配咩最好drift?
因為聽人講頭單配尾直靜係甩到一d細灣
大灣好難甩?係咪真架呢?
因為我宜家用緊頭尾直(頭尾都係牙差拎tempo塞住)
想試下換枝 ...

ed應該係我謂掛

係車場用頭尾珠差同用頭尾直濕分別係邊&有幾大差別??

作者: 謙v3v 時間: 2009-1-20 07:00

原帖由椰禮於 2009-1-20 04:14 發表

 登錄/註冊後可看大圖

ed應該係我謂掛
係車場用頭尾珠差同用頭尾直濕分別係邊&有幾大差別??

係咩

唔記得啦
之前爬文見到

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)