RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: LeoChan
收起左側

Tekin 資訊交流區

[複製鏈接]
 樓主| LeoChan 發表於 2008-2-16 04:30:20 | 顯示全部樓層
 樓主| LeoChan 發表於 2008-2-22 04:25:37 | 顯示全部樓層
25/2 Monday arrive !
& have HotWire for R1 series firmware update
HotWire fit B1 , FX & R1 Series ESC update & setup ...
TekinHotWire.gif
doooouglas 發表於 2008-2-22 11:28:16 | 顯示全部樓層
GOOD NEWS~~
 樓主| LeoChan 發表於 2008-2-24 23:02:13 | 顯示全部樓層
derek5 發表於 2008-2-26 21:38:29 | 顯示全部樓層

回復 22# 的帖子

Leo兄,我想知HotWire在那兒買到?我問過陳叔,佢話未有,連Polo恤都話未知,但我個R1 Pro是在他那兒買的,謝!
 樓主| LeoChan 發表於 2008-2-27 02:08:07 | 顯示全部樓層
原帖由 derek5 於 2008-2-26 21:38 發表
Leo兄,我想知HotWire在那兒買到?我問過陳叔,佢話未有,連Polo恤都話未知,但我個R1 Pro是在他那兒買的,謝!


HotWire first lot was all sold out !
next lot after 2 weeks

If you want update your R1 Pro can MON-FRI after pm 5:00 go to we Co. update New firmware Free service !

Polo shirt need go to we office with invoice & packing.

Thanks!

[ 本帖最後由 LeoChan 於 2008-2-27 02:12 編輯 ]
 樓主| LeoChan 發表於 2008-3-5 03:33:25 | 顯示全部樓層
New Firmware ver.171 in Tekin web site d/l !

[ 本帖最後由 LeoChan 於 2008-3-5 19:52 編輯 ]
johnsonhong 發表於 2008-3-12 16:54:44 | 顯示全部樓層
Leo, tekin 358 motor have stock?
calvinpun2000 發表於 2008-3-12 17:29:48 | 顯示全部樓層
原帖由 LeoChan 於 2008-3-5 03:33 發表
New Firmware ver.171 in Tekin web site d/l !




用咩線連上esc?
doooouglas 發表於 2008-3-12 17:32:16 | 顯示全部樓層
原帖由 calvinpun2000 於 2008-3-12 17:29 發表




用咩線連上esc?


                               
登錄/註冊後可看大圖
calvinpun2000 發表於 2008-3-12 17:36:48 | 顯示全部樓層
原帖由 doooouglas 於 2008-3-12 17:32 發表


                               
登錄/註冊後可看大圖



你有冇~!?
 樓主| LeoChan 發表於 2008-3-12 18:27:12 | 顯示全部樓層
原帖由 johnsonhong 於 2008-3-12 16:54 發表
Leo, tekin 358 motor have stock?


Sold out !
 樓主| LeoChan 發表於 2008-3-12 18:27:57 | 顯示全部樓層
HotWire back in stock !
johnsonhong 發表於 2008-3-13 13:54:15 | 顯示全部樓層
Tekin RS can pre-order now? I saw in http://www.rcmarket.com.hk/
 樓主| LeoChan 發表於 2008-3-13 16:33:55 | 顯示全部樓層
yes !
 樓主| LeoChan 發表於 2008-3-22 07:30:32 | 顯示全部樓層
Version 172 should be out pretty soon. We are always improving things and have found a little more speed. We expect people will be able to gear back a little with version 172 and still have all the speed. Heat will be reduced even further.

No heat sinks or fans just means all that wasted power is going to the motor instead of adding to global warming.
 樓主| LeoChan 發表於 2008-4-11 04:59:43 | 顯示全部樓層
Next week have new R1 series Firmware should have more punch and more top speed.
 樓主| LeoChan 發表於 2008-4-26 03:46:07 | 顯示全部樓層
The new Hotwire version 2.6 and the new R1 version 178 is now available for download at the teamtekin .com website.

http://www.teamtekin.com/hotwire.html

Please use windows Add/Remove programs to uninstall the old Hotwire and install the new version.

R1 version 178 improvements….

1 – Fixed the timing adjustment, which may help starts a little with some motors.

2 – Improved low voltage operation, It should crawl home even on a dead 4 cell battery with no hesitations or stutters. This was really for the RS where it really rocks with sensored motors and tall gearing in 4 cell Oval or 1/12 scale.

3 - Smoothed out a little issue we found in the drag brake.

4 – Improved radio signal processing for spectrum bibbles, still a good idea to run a cap on spectrum if you see any shutdowns.

New Hotwire version 2.6 items…..

1 – The new Hotwire features do require that you update the R1 to version 178 for compatibility. You will be prompted this is happening when you plug in the R1 units for the first time to the new Hotwire.

2 - We added a lot of right click and mouse over options and information. Look around and see what you find.

3 - Timing now adjust a lot further for use with the high turn stock BL motors. In most cases less timing and more gear is better, but to equal the no load kv’s of the 13.5 and 17.5 BL motors with sensored controllers you need a lot of timing. We realize gearing up eve further is really difficult. It adjust from 0 to 30 degrees, 1 to 100 on the slider.

Note - Our sensorless motors run best at the default setting. You can increase timing slightly, but we do not recommend very much more than default or you will just see a lot of heat. Min timing is neutral and really where all motors run the most efficient. For 1/8 scale motors the min timing or just a few degrees advanced is best.

4 - The custom voltage cutoff is now stored on led4. You can turn it off or choose another cutoff with the onboard user interface and still return to the stored custom value.

We increased the custom voltage cutoff level to 17.9 V for 5s and 6s applications. Still not designed for use in 1/8 scales, but it works and people are doing it, so we are supporting it. IMPORTANT - above 3s you must use a higher voltage cap than is supplied with the unit. We have forum thread explaining these applications. We could not get to 18V due to some math limitations, we could have fibbed. However, since our voltage cutoff reacts very fast and under load, it is still a lot more accurate and better for the batteries than most voltage cutoffs that only react after the battery has been below the setting for seconds.

5 - The drag brake in the R1 will adjust to higher levels in the Hotwire than on the speedo user interface. The speedo will adjust to about 60% brake strength for drag brake. The Hotwire will allow full brake strength for drag brake for crawler applications.

6 – In the R1 you can now adjust Drag Brake and Reverse Strength separately in the Hotwire. If you adjust BS on the controller they unfortunately pull back together to the same setting.

There is a RS interface in this Hotwire so those who get them soon will have something until we finish it all up and make it look sweet. There is a sensored only mode in the RS. In this mode it will still run a sensorless motor. It will also still roll to sensorless mode if it detects a bad sensor or the plug comes out. This mode simply does not allow a sensored motor to roll into sensorless mode during run. It stays in sensored mode, which basically removes our timing settings and runs the motor with the physical timing set in the motor.

Have fun!
 樓主| LeoChan 發表於 2008-5-3 16:27:23 | 顯示全部樓層
New R1 Firmware 179 !!

[ 本帖最後由 LeoChan 於 2008-5-3 16:30 編輯 ]
FX%20hotwire.jpg
R1%20hotwire.jpg
 樓主| LeoChan 發表於 2008-5-9 00:32:08 | 顯示全部樓層
Ver. 180 now !
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 18:23 , Processed in 0.037012 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表