Tamiya CC01 project(new bumper)

回復 rover901 的帖子

我估ＫＷＳ應該有。
仲有就係在 RCxxrt 買ＹＲ會平d，所以當日我最終都cancel GPM的order，去RCxxrt買YR出的CC-01 parts.
好似記得ＹＲ轉向坏係7x，但ＧＰＭ就要百幾蚊

仲有一樣野，就係你套ＲＰＭ燈組係For Short Course的，唔知岩唔岩CC-01..
你應該買3Racing or Autocad 果套會合適d，而且連LED

euro614 發表於 2011-6-1 10:11

                               
登錄/註冊後可看大圖

仲有一樣野，就係你套ＲＰＭ燈組係For Short Course的，唔知岩唔岩CC-01..
你應該買3Racing or Autocad 果 ...

I planned to use the long ones for the roof, while the short ones for the bonnet.

Hope it works.

euro614 發表於 2011-6-1 10:06

                               
登錄/註冊後可看大圖

回復 rover901 的帖子

我估ＫＷＳ應該有。

I struggled between YR and GPM, but thought I try the GPM whole set will fit more.....a wrong decision maybe

回復 rover901 的帖子

都係咁用者，無問題的...

不過......


如果在ＧＰＭ訂，你就可以統一所有parts color，唔駛又紅又藍...

I like red and blue wor

回復 rover901 的帖子

3 racing果隻，有四棧燈／五棧燈，兩款的，

finished 70% of the car:

with a little help from a set of better tools:

                               
登錄/註冊後可看大圖

first the front lower arm, the GPM arms look really nice:

                               
登錄/註冊後可看大圖

this one is easy, just attach it on to the "subchassis"

the steering from GPM:

                               
登錄/註冊後可看大圖

it took me a while to find out I assembled the set incorrectly.....

it took me a while to find out I assembled the set incorrectly.....

after 1.5 hours, I finally figured it out:

                               
登錄/註冊後可看大圖

then I assembled the upper arms and c hub:

                               
登錄/註冊後可看大圖

I know I know, u think the color don't match

a closer look

                               
登錄/註冊後可看大圖

and I can't use my 80mm YR shocks in the front cause the suspension mov't is very limited

                               
登錄/註冊後可看大圖

so I used the stock shocks

to be continue

你唔改頭避震，成架車會頭低尾高，師兄有咩辦法去改?

好靚!毒死人

euro614 發表於 2011-6-3 10:40

                               
登錄/註冊後可看大圖

你唔改頭避震，成架車會頭低尾高，師兄有咩辦法去改?

The front suspension system is a dead end,unless I cut lots of chassis, and replace lots of parts, I can make the front with more travel and clearance, I will reserch and see if anyone done this before.

At the moment, I will change back to FR 70mm.....

alanwhc 發表於 2011-6-3 10:58

                               
登錄/註冊後可看大圖

好靚!毒死人

thanks!

rover901 發表於 2011-6-3 12:41

                               
登錄/註冊後可看大圖

The front suspension system is a dead end,unless I cut lots of chassis, and replace lots of parts, ...

我都係用ＹＲ80mm，強行裝入去。
就咁睇樣，頭尾好balance，但講性能，就好死硬...

I finished the chassis:

                               
登錄/註冊後可看大圖