進軍Formula One.......F103 我黎喇.... ^^~

我又攪事喇.......
我個老友不斷放毒.......
最後...今日解左毒..........

F103 我黎喇.........
^^b

^^~
remark.........
嘻~~嘻~~
重點係....
一張金牛多少少.....
攪掂....
^^v

恭喜恭喜, 全部好野! Full option!

散砌最環保, 零廢料

HKD 1000 only? Good deal

- carbon lower & upper deck chassis
- Alu 1 piece motor mount
- 1,2,3 degree camber steering cup + Carbon front arm
- Le Mans body
...

有沒parts list....咁會使更多人玩假 pro 10....
但我要平呔呀 !!!!
真pro 10 呔都係under $200

平呔 ok, change to 103GT wheel hub and play GP Foam tires, $100 = front and rear

or play F1 rubber tire, PRO 10 do not have rubber tire, cannot use 1:10 GP foam tire.

That's why me and Milkboy like 假 pro 10

一雞兩味, 換bumper, 又F1, 又 LeMan, 1k 重想點?

3 *Yeah Racing (#F103GT-014SV) Aluminum Main Drive Shaft (SV) For  USD$8.37
1 *Yeah Racing (#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver  USD$16.67
1 *Yeah Racing (#F103RM-013BK) Aluminum Motor Mount Single Piece (  USD$11.06
2 3Racing (#F103GT-03) Low Fraction Pads  USD$5.80
1 3Racing (#F103GT-06/WO) Graphite Friction Damper  USD$4.00
1 3Racing (#F103GT-22) Alum Friction Damper Post  USD$3.90
1 3Racing (#F103GT-24) Friction Damper Spring Set  USD$2.00
1 3Racing (#F103RM-08) Graphite Upper Deck For F103RM  USD$8.50
1 Blade Racing (#BL014) TWR XJR14 For Tamiya F103  USD$20.90
1 Kawada (#FOB582) F1 Spur Gear 48P 82T W/Balls  USD$5.90
1 Tamiya (#50505) F1 T-Bar For F103 Chassis  USD$3.90
1 Tamiya (#50506) F-1 Spare Gear Set  USD$3.20
1 Tamiya (#51346) F103 Thrust Set  USD$3.90
1 Tamiya (#51347) F103 Disc Ball Set  USD$2.20
2 Tamiya (#53248) Formula Lightweight Diff Joint Set  USD$11.80
1 Tamiya (#54153) F103 Carbon Reinforced Sus Arms  USD$6.50

Yeah racing 大約56算
Tamiya, blade, all others, 大約8算

or play F1 rubber tire, PRO 10 do not have rubber tire, cannot use 1:10 GP foam tire.

That's why  ...
hk_sdu 發表於 5/1/2011 09:42 PM

                               
登錄/註冊後可看大圖

係一雞三味, 仲有103GT

agree...it true....
ching now use what degree front GP foam tire as you before say run out of front tire...
mine now use old GP front tire dia around 55 to 58...but rear only have 54mm (F1 tire)
it look some

1:10 GP tire usually 37F 35R, or 35F, 32R

the problem is some LeMans body wheel arc is very small but GP tire, diameter is larger than F103 tire. May need to trim down the foam.
On the other hand, large diameter wheel make your car run faster (larger rollout) and more stable

回復 9# lung1

其實係一雞四味, some people use touring body, Speed6 with F103GT
可能係世上最多玩法RC, 星星問你服未?

thx info...colt body 200mm is for oil car...that fit those GP foam tire
<-------protoform one and those for f103  are small wheel arc....that why i need  open arc very large.....
but this body should be retire soon (broken alot)...so let it be

i think i blow too much water here, need to post some picture of my 103

1. F1 - stock spec ESC + 17.5 = TRC 仕樣

2. LM Chassis 造 103GT + XJR14 shell (裝燈) or COLT = JV  仕樣

* can fit with 5000 50c SMC lipo

abcde hope to see u in JV later

回復 8# hk_sdu
眞係好心機

i think i blow too much water here, need to post some picture of my 103

1. F1 - stock spec ESC +  ...
hk_sdu 發表於 2011-1-5 22:44

                               
登錄/註冊後可看大圖

多謝分享....hope to see you too in JV....
我地玩hw 9t (4300kv) 多....大約有8.5t(4000kv)有senior 速度到
pro ten 朋友用lipo...我用a123...所以慢d...(但我巳用lipo mode 黎差 a123....電壓升dd啦)
星期六早上玩多...但見有師兄星期日都有玩...可能我自己會玩多日

恭喜恭喜，支持一雞多吃

milk哥~!
我見到你有d TRG Parts係咩黎

擒晚出咗KWS同fan行街同買pro ten呔.
老鴻真好識搵$$$. 上星期我買1套前後都係$165.
今次要$185 多咗$20, 佢可能見到多人玩所以加價. 食硬你.
不過都平過玩tamiya F1 綿呔, tamiya F1 呔頭尾一套過$200 + 向JV蝕得好快.

回復 18# dl

^^~
TRG 5020 尾翼碼囉.....