RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 6055|回復: 21
打印 上一主題 下一主題
收起左側

砌scx10請教

[複製鏈接]
1#
965 發表於 2014-12-29 10:10:45 | 顯示全部樓層
Motor (brushed) is water proof .. some receivers are water proof (resist) too ..

The internal bec from the hobby wing esc may not be strong enough, but should be ok, try try first ..

Lipo battery is much better then Nimh ..... Lipo (hard case with some DIY weather proof) is ok with rain snow .. but not drive into water, that is why people still use nimh, if you are not into high speed, 7.2/8.4 nimh is ok, you can also get 9.6, 10.8 or even 12V nimh, that hobby wing esc can that 3s voltage anyway.
2#
965 發表於 2014-12-29 11:40:50 | 顯示全部樓層
ricksonchow 發表於 2014-12-29 10:55
Good suggestions, I left all my Nimh rotten already. So how do you water proof your Lipo?  Coz I n ...

I am not that crazy on waterproof my lips, I drove my cars with lips on snow..... So far ok....

But most the RC guys I know here are quite hardcore into crawler/trailer..... They plasti dipped the whole lipo..... Esc....servo...RX......and marine greased all the bearings ..... They treat their RC cars as submarines!!
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-18 02:54 , Processed in 0.081009 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表