Dennis巴士建造中...分享製作過程

原帖由 dalelee 於 2006-11-28 15:59 發表
ＬＥＥ幾日因太忙
整得頭燈ＪＡ

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

個頭唔太似
下一部會好Ｄ

Woaw, thank for sharing. If you can add more knowledge about how to make most of the shape curve or even dimension. It will be perfect (Well, I know maybe I ask too much )
I think there will be another good buy after the single deck CITIBUS. I hope another owner can also share some process how he made it.

原帖由 dalelee 於 2006-11-28 18:17 發表



ok, tonight i will be more free,
i will write or draw the format to make the curve for all brother
but 其實我有d手工都未做到最好
希望大家唔會介意la

謝謝你無私既分享.
手工好唔好我覺得唔係大前題.
而我亦相信技術分享會有更好更快既進步.
就算我自己整咗一部車, 我會希望分享後有另一部更好既車出現

原帖由 dalelee 於 2006-11-28 18:34 發表
orange00
你有邊一方面想知ar???
我今晚試試整一d simple 比你睇睇la

其實我唔係想整巴士, 只係想整貨車. 但最頭痛永遠都係d curve唔知點整. 仲要左右兩邊.
眼水差d都整到大細超. 仲有N咁多嘢想問