Tamiya TRF-417 玩家專區

大家好，我都係417用Speed Passion 4.5
車身高前5mm/後5.5mm
前Toe in 1度/後3度
前HPI金/HPI銀
試過用前银/後銀，但入彎好堆頭，現在金/銀出彎推，想問樓主你Downstop Set多少?

arto6 發表於 2011-9-9 13:33

                               
登錄/註冊後可看大圖

請問c hing  用咩呔呢? 有無 overheat 的聲音呢?

Solex 40

And what you mean by "overheat Sound"? Sorry, I am quite new to these thing

arto6 發表於 2011-9-9 13:31

                               
登錄/註冊後可看大圖

頭 6 尾 5 係我的標準, 有時入灣時甩尾會試頭 6 尾 5.5 - 6 .

You mean Downstop or Ride High?

arto6 發表於 2011-9-9 18:54

                               
登錄/註冊後可看大圖

轉彎時呱呱聲

OIC, no sound....

arto6 發表於 2011-9-9 21:35

                               
登錄/註冊後可看大圖

我覺得新手係可以玩417的，因為它有着全面的調較有助新手學set車， 缺點是車價較貴， 其實新手可考 ...

I agree with C hing, as now I am progress learning how to set it to my driving style too but it will be nice, like C hing sharing what their set up are...

arto6 發表於 2011-9-9 18:53

                               
登錄/註冊後可看大圖

我r.h. 頭4.8 ; 尾5.2 (d.s. 頭6; 尾5 至6)

C hing how about the spring?

arto6 發表於 2011-9-9 23:33

                               
登錄/註冊後可看大圖

我每次會以原裝setting來應付新track layout, 之後都係聽呔的聲音來變setting來對抗overheat or overcool ...

How about the gear?  You use 48 or 64??

OIC now I am using 48 the car seems ok, I have try new setting but now do have some over-steering at rear...
Downstop, all same for front and rear at 5
Ride High at 5/5.5
Camber 1/1
Front Toe out 1/rear original

sex8088 發表於 2011-9-1 11:37

                               
登錄/註冊後可看大圖

MY TRF 417用Hobbywing 60A + 5.5T Brushless  113T/26T , MOTOR TEMP 70 DEGREE, VERY SLOW,  I'LL TRY TO ...

Did you update the ESC?  And did you run on the finial Gear Ratio for your motor? As now yours should be 8.45 for final gear ratio, mine seems slow compare to my friends using the same 5.5T motor (mine is 4.5T) but my guess is he set turbo (he always catch me at 2/3 of the straight road) and I use 48 patch 84/18 and after updating the ESC, its better not slow but not faster than my friend....

arto6 發表於 2011-9-14 22:04

                               
登錄/註冊後可看大圖

over-steering 要對正下藥, 是入灣, 灣心,出灣over-steering 呢

出灣，有什麼高見？

arto6 發表於 2011-9-15 11:11

                               
登錄/註冊後可看大圖

不高不高我識小小把了，如果你不是暴力full油出彎的話， 最大可能是你後差速過緊， 其次是尾油壓太直， 尾 ...

Yes you are right, 我原來set錯hole, now rest set to a new one, still need to go and try to see the out come....but thanks for tips!!

arto6 發表於 2011-9-15 11:21

                               
登錄/註冊後可看大圖

my 4.5turn, LRP X12 with h.w. esc setting is drrs 7, boost timing 12, turbo timing 11,delay 0.1,ge ...

haha I just updated it and trusted those guys in speedpassion, now I am using their MOD V3, and didn't change anything inside...

arto6 發表於 2011-9-16 08:21

                               
登錄/註冊後可看大圖

鬥五分鐘的車手大部份都係4t 加 turbo (當然唔係條條賽道都得啦)

too bad I am not use to turbo, I crash my car once when I add it!!底版斷咗!!

arto6 發表於 2011-9-16 15:19

                               
登錄/註冊後可看大圖

too bad,
有時快時並不快，慢時並不慢

Agree because it is not like driving real car and know when it will kick in!!  Or may be it is just me...

Anyone care to share more setting??

jythegreat 發表於 2011-9-28 01:40

                               
登錄/註冊後可看大圖

我係新手,不過都膽粗粗加入左417嘅大家庭,請各位師兄過人多多指教

Yea more people to share is good....where you play?

jythegreat 發表於 2011-9-28 13:43

                               
登錄/註冊後可看大圖

most probably 隧道口

OIC go JV different, can go really high speed but if crash...really big wor...which I just did today haha

jythegreat 發表於 2011-9-28 20:16

                               
登錄/註冊後可看大圖

唔係417出事啩

Yes but it is just me, didn't pay attention during the high speed corner