買左件新玩具

回復 7# Racon


你是否話花左呢, 我都係呀

Geroge兄,

俾d相你參考下, 我係好有好有耐性咁run, 係車場第run足一日都無落地行過, d朋友都叫我落地行, 我都照用run in 油, 你睇頭三張相, 頂至底一條紋都無.

但係另一面就, 我係完全無快玩的情況下無左一套司桶, 所以新一副司桶都係俾有經驗的朋友搞

回復 16# RCwing

RCwing兄,

我諗呢部機真係要小心d教, 可否提供你run-in後用機厚盤頂介子, 什麼極力子彈弓, pre-load同cluth gap幾多呢, 唔想又無一套司傘呀. 謝謝!!

今日又再ko一套司桶, 今次已經係場問玩開d高手點搞, 而且都係好好好小心, 溫機加介子, 完全無磨金屬的狀態下先拿走介子, 先開始快, keep住七十度, 都係咁, 無玩過又一套司桶, 後尾嬲嬲地又得佢係個場係咁full雞亂飛, 又無野仲超快, 但ideal唔到, 返到來無曬壓縮, 但真係好快, 吹帳, 但唔奮氣, 都想再試, 再唔得的話埋個搥馬上卜爆佢. 然後影上來俾大家睇.

其實一向都鍾意OS的產品, 但今次真係好鬼嬲, 係場好多人睇住我好忍手, 慢慢溫, 去到唔夾機先五六點先俾高手整(唔好意思講邊個), 肯定唔係人問題. 但真係覺得造工有問題. 也不是錢問題, 一套司桶七佰靚元, 但係曬心機, 車錢, 時間, 無快過, 未飛過. 昨日嬲到係場係咁FULL, 想佢啤令機瞉完部死, 等自己死心. 但又唔死. 最慘D crankshaft 啤令一d績都無閃令令.

回復 25# mmsrontam

Yes, I have been there for run in my OS engine two week ago, but I don’t re member who you are. Anyway, I went ACO yesterday to run in that engine again, unfortunately, same result as many C Hing. And many C Hing seen what I did yesterday, I sure I did well in the run in procedure. No overheat, the engine reach the optimum before running on track, no full speed. But………………same result.

回復 27# valklai

有朋友都試過用溫機台溫好先, 溫滑左先, 但落地後無幾耐都一樣. 但見人地又有d無事玩得, 咁先唔訓氣.

回復 32# kspleung

其實都好難講, 我只可話當時已經完成初步run-in, 才剛開始睇溫度較機, 但十圈以耐出事. 個司傘內外仲立立令.

但又聽過有d師兄花了照玩都得, 但已經無曬壓縮. 係差唔多完全無壓縮, 但ok的. 要問下d師兄先知了.