Nuova Faor 1/5 Electric SUPERBIKE 2009 Factory R-Edition

Not too hard ar.  We are playing the nitro one now.  Just need some time the set it up properly.  

We play at Yuen Long and Jordan.  I play the TT nitro and my friends have the NF501 and NF506, and one 501 converted to electric.  Try Hung sing I know they have the nitro one but not sure if they have the electric version.  Get one and play together ar.  

http://www.nuovafaor.it/modules. ... article&sid=724

maybe you can consider this one ar.  still the latest 509 with front brake at only 1/3 the px wor.

Maybe too busy eating, I see them eating dinner at KWS last night.  

我問代理...都冇覆我...我買左就搵你地la!~
EDI 發表於 2009-11-4 13:11

                               
登錄/註冊後可看大圖

yes ar, you need 2 servo, one for brake and the other for steering.  The front fork was rusted!!!  Try to use some polishing compound and clean it off.  For normal use it should be ok as it is always moving and should not rust anymore.  Looking forward to see you run it soon.  hehe

Standard size is ok.  9551

You just need a high torque servo for the brake.  

nothing really special.  Just remember the steering is reversed.  The wheel turn right the bike will turn left.  That's all.  hehe

Ya, because the 1/5 steering use the shift of cg to steer.  so the wheel turn right to make the bike lean to the left.  And do not tighten the steering push rod spring too much as it will become very hard to drive.  A good starting pt is if you push the front wheel by hand from side to side with the radio off it will not move the servo.  

哈!~咁奇怪....thx
EDI 發表於 2009-11-13 23:01

                               
登錄/註冊後可看大圖

Wor, sales talk man!!  For my TT I got my parts locally.  NF my friend got it for the distributor in HK (Hobbyxxx).  Tires I got them from oversea.  We had 5 1/5 bikes in Yuen Long last night, 2 NF, 3 TT.  It was so much fun I stay till 4:30am

BTW:  We are playing again on Wednesday night start around 9pm.  Feel free to join us.  hehe

yaya, I will bring the 電子爐.  you bring the 變壓器啦.  And ask Andy to buy some food.  Hehe.  No problem edi.  one ching have a 509 you can see his bike if anything is not clear.  See you Wednesday.  

http://bbs.rc-evo.com/viewthread ... page%3D1&page=1
You can see the location at page 1 second post.  If you not sure where it is call me.  I pm my number to you.

Can you just tape it onto the side of the main frame?  Your bike is nice looking forward to see your bike soon.  

don't worry.  Lot of NF and we will sort it out tonight.  

wor.  Is that thing real carbon fiber!!!  It is cool man.  I ordered a 509 (only the cheap model)and will pick it up tomorrow.  And Andy brought one too.  Wednesday will start at around 9pm.  Looking forward to see you.    BTW:  We will go tonight too for more testing.  

We pickup 3 509 last night.  Lot of 509 to play with you la.  hehe  BTW:  Will have a 1/5 bike race on 13/12.  Have time to race?

Ya, but not the 509's.  Not finished building it yet.  Will run my old TT tonight and 501, TTe, etc.

Dear Angelz:

My friend got this front fork yesterday.  Very very smooth.  I am thinking about it too but it is kind of expensive...  a little less than 200usd with upper and lower tripod.  And it is very nice as the top cap is removable to chang the spring.  BTW:  it come with 2 extra spring with the kit.  very nice.  hehe

44# ANGELZ

Dear silvavisil:

Your phone is good man.  The picture look very clear wor.  hehe

46# silvavisil

Really!!!  Ya, from the picture in the NF web page the pro bike come with the normal fork.  I have not seen Edi's bike yet.  And the local shops don't have the pro bike in stock so I am not sure which one it comes with......

Hi jf813,
上星期 我的朋友買了一部 509 PRO 原廠前叉只有彈簧避震 沒有油壓避震器 ....
不懂??
ANGELZ 發表於 2009-11-27 16:13

                               
登錄/註冊後可看大圖