RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1616|回復: 10
打印 上一主題 下一主題
收起左側

Brushless ESC for F104

[複製鏈接]
跳轉到指定樓層
1#
hk_sdu 發表於 2009-8-19 14:20:03 | 顯示全部樓層 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Which model of brushless ESC used on your F104?

Most of the brushless ESC is pretty large. My HW 120A is forcing the car body out a lot !!!
2#
 樓主| hk_sdu 發表於 2009-8-19 17:01:59 | 顯示全部樓層
hi c hing, LRP SXX is with cooling fan or without?
3#
 樓主| hk_sdu 發表於 2009-8-20 11:17:41 | 顯示全部樓層
i start with brushed ESC, GM V12, with fan black pig, stock gear ratio.
Now want it to be faster, with 3300kv.

the hobbywing ESC is too large, may be it will be better if i don't use "round side part" on the card body.
4#
 樓主| hk_sdu 發表於 2009-8-20 15:23:19 | 顯示全部樓層
cannot wor, my Hobbywing 120A is quite large, i have try all the possible position. Unless the cooling is removed. Are u using 35A?

To answer your questions:

- Is the brushless motor faster than traditional one? Not necessary, depends on your motor turns. But in theory BL motor should be more efficient, as no friction with motor brushed.

- 3300kv should be similiar to 11.5T. A guy from the shop told me, they have tested, 11.5T is similiar as 3500Kv. I choose 3300kv simply because it is $100 cheaper than 11.5T for TeamPower as example. And i am not going to join any race, just for fun.
5#
 樓主| hk_sdu 發表於 2009-8-21 18:59:06 | 顯示全部樓層
60A 120A same external size. 120A can just allow higher limit on motor.

Finally, i removed the left size of the body
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-18 03:14 , Processed in 0.140110 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表