RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: outlaw motor [打印本頁]

作者: chris6200 時間: 2024-3-26 15:54
標題: outlaw motor
本帖最後由 chris6200 於 2024-3-27 07:07 編輯

anyone can tell me, What is Outlaw motor?
I always to read some regulation of competition, used in OUTLAW motor is allowed.e.g: 17.5T outlaw motor
17.5T stock motor
what is different above motor?

作者: AMAT 時間: 2024-3-29 12:25
STOCK motor usually have a specified size or motor rotor. I don't remember the exactly number, but stock motor rotor is smaller than the outlaw one.
That's why Outlaw motor usually have a higher torque, a higher magnetic feeling.

While the stock motor is also getting faster and faster, so the wire resistance also being count, can't be lower to some value.

In Hong Kong, outlaw or stock still OK for most of the blinky and open brushless race. For other country, case by case.

作者: chris6200 時間: 2024-4-2 15:23
thank you

作者: RCTOURING 時間: 2024-4-23 16:57

AMAT 發表於 2024-3-29 12:25
STOCK motor usually have a specified size or motor rotor. I don't remember the exactly number, but s ...

請問outlaw 的13.5T motor 是可玩13.5 Turbo 模式嗎？還如可以，齒比應該多小？

作者: AMAT 時間: 2024-4-26 20:13

RCTOURING 發表於 2024-4-23 16:57
請問outlaw 的13.5T motor 是可玩13.5 Turbo 模式嗎？還如可以，齒比應該多小？

可以，但唔可以開咁大同齒比相對要高，至少都5.5-6。

作者: RCTOURING 時間: 6 天前

AMAT 發表於 2024-4-26 20:13
可以，但唔可以開咁大同齒比相對要高，至少都5.5-6。

謝謝你

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)