標題: Group C 番新 - Part 2.5 and Part 3 [打印本頁] 作者: johnxxxjelly 時間: 2011-9-30 03:26 標題: Group C 番新 - Part 2.5 and Part 3 本帖最後由 johnxxxjelly 於 2011-9-30 03:31 編輯
Poor guy with no money only can play with old cars
Upgrade Part 2.5:
Reference from oversea's F1 driver and TRG 111; the upper A Arm can move freely up and down now.
[attach]542228[/attach]
Test run some time ago... another C car with 103 front set...
[attach]542229[/attach]
Oversteer too much for this set up...
[attach]542230[/attach]
Failed!!! for 103GT front set... need to find a better way to mount the front set frimly on the deck below
[attach]542231[/attach]
Upgrade Part 3:
Similar to Part 2.5 but new parts added
[attach]542232[/attach]
Different upper arm set up on the right hand side.
[attach]542233[/attach]
Hope it can help to over come the oversteer problem...
[attach]542234[/attach]
Closer look to the new set up...
[attach]542235[/attach]
Done on both side and with a new set of group c tire... Yeah
[attach]542236[/attach]
Worry about the stiffness without the cross bracing
[attach]542237[/attach]
Normal Position:
[attach]542238[/attach]
Under pressure:
[attach]542251[/attach]
Modification of another C Car:
Original front set with 103 wheels will replace the previous failed 103GT front set as benchmark for this set up.
Hope there will be no rain for the coming sundays...
Thanks for watching 作者: johnxxxjelly 時間: 2011-9-30 03:32
How come the photos show up again at the end of the post????作者: d.s 時間: 2011-9-30 06:40
經典~!!作者: garywong5368 時間: 2011-9-30 09:51
師兄真勁抽,咁都改到作者: slowerthanyou 時間: 2011-9-30 10:09
good job C-hing! The front end reminds me of Xpress series of cars though.作者: vcslll 時間: 2011-9-30 10:34
師兄請問3.0是否好跑過2.5呀?如果同左面原裝頭件比,又邊架好啲?作者: lawlaw 時間: 2011-9-30 10:36
改得好, 會去JV試車嗎??作者: Joseph888 時間: 2011-9-30 10:42
改完好走嗎作者: ken0750 時間: 2011-9-30 13:06
so nice!作者: johnxxxjelly 時間: 2011-10-1 12:22
Hope its not going to rain the coming sunday la.... 作者: tiger1 時間: 2011-10-1 13:57
very nice idea 作者: vcslll 時間: 2011-10-1 14:05
師兄努力,玩車最重要系頭腦及身手,金錢其次!