picco bearing

師兄！想問吓picco .12 edo bearing 可唔可以唔用原裝啤令。
可唔可以去旺角配合size的啤令。
請問有冇size 可以提供。
謝謝

拆出來就知啦

original bearing is Made In Swiss also price is not so high, why change ?

thank you

原帖由 teamc 於 2008-10-23 09:21 PM 發表

                               
登錄/註冊後可看大圖

original bearing is Made In Swiss also price is not so high, why change ?

Don't fool people around, original bearing is not Swiss Made and Picco claimed Swiss quality only.

Actually most of the Picco engine parts are made in Tawian/China. This is the reason some Picco engines do not have "Made in Italy" on the crankcase.

Feature declarations from Picco website:

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

[ 本帖最後由 Motorman 於 2008-10-27 06:02 編輯 ]

原帖由 ali 於 2008-10-22 07:03 PM 發表

                               
登錄/註冊後可看大圖

師兄！想問吓picco .12 edo bearing 可唔可以唔用原裝啤令。
可唔可以去旺角配合size的啤令。
請問有冇size 可以提供。
謝謝

你可以去配任何合size嘅啤令, 不過唔好買 D 太 Cheap 嘅嘢, 只會浪費時間與金錢.

原帖由 ali 於 2008-10-22 19:03 發表

                               
登錄/註冊後可看大圖

師兄！想問吓picco .12 edo bearing 可唔可以唔用原裝啤令。
可唔可以去旺角配合size的啤令。
請問有冇size 可以提供。
謝謝

我部red dot都啱啱換咗前後bearing
我就用 CSO 出嘅ceramic bearing

maybe i am wrong...but from my observation, the bearing from Picco shall be Swiss made bearing....do u think Swiss made bearing is really expensive? I recommend u to ask price from those bearing shops...By the way, if u know other bearings made in Japan or East Asis has similar performance and durability to this Picco bearing, Please tell me where can get it and which brand...

All Picco Engine & Parts Which Import By Hobbypro Are Made In Italy Except Pull Start, Bearing Swiss Made, May Be You Buy From Someone Else Is Made In Taiwan But Our Picco Bearing Sure Swiss Made !!!

Hobbypro Is Official Agent For Picco !!!

原帖由 Motorman 於 2008-10-27 05:03 發表

                               
登錄/註冊後可看大圖

Don't fool people around, original bearing is not Swiss Made  and Picco claimed Swiss quality only.

Actually most of the Picco engine parts are made in Tawian/China. This is the reason some Pi ...

Picco Engine Are Made In Italy By Picco Themself, Only Pull Start Are Made In China, Please Post When You Are Sure About The Truth !!!

many tks

原帖由 valklai 於 2008-10-27 10:50 發表

                               
登錄/註冊後可看大圖

我部red dot都啱啱換咗前後bearing
我就用 CSO 出嘅ceramic bearing

等你試後報告其實有冇人用過同用後評論如何

[ 本帖最後由 pui 於 2008-10-28 00:27 編輯 ]

原帖由 pui 於 2008-10-27 18:45 發表

                               
登錄/註冊後可看大圖

等你試後報告其實有冇人用過同用後評論如何

培哥,
我諗要一d長用既人先至可以答得到你啦,好似耐用程度......
因我副red dot依家擺埋咗喺一便有排都未用
但我副mega ZX21都用緊呢隻bearing
我覺得分別唔到有d咩啦(其實bearing啫,可以分別幾大吖),只係當用原裝普通bearing價錢
就可以買到ceramic bearing嚟用,
心理上覺得唔錯吖,
唯一有分別嘅就係當拆晒C筒走,就咁only空轉條架冷會覺得轉得好順咁囉,其它嘅嘢我就答你唔到啦

不過用落好似 Steel Bearing 耐用過ceramic...

ceramic 好似幾lit 油已經開始"鞋".....

I heard cermaic can go very wrong and ruin the engine vs steel won't.

C-Hings, any ideas?

最好就用原裝啤令...............唔好自行去旺角配合size的啤令，死路一條，所有engine bearing 都係special size bearing

bearing可以分別好大..........唔好睇少它