本帖最後由 Dinballian 於 2012-11-27 12:30 編輯
Tamiya 1:10 TT01E Nissan R390 GT1 w/ESC EP #58544
Nissan created the R390 GT1 as a challenger to the 1997 24 Hours of Le Mans. The car featured a carbon composite monocoque and a 600hp 3.5-liter twin turbo V8 engine for superb performance. It recorded incredible lap times during pre-qualifying and went on to perform admirably during the race itself. The R390 assembly kit was originally released on the TA-03R 4WD touring car platform in 1997 and it's offered again on the easy to assemble TT-01 Type E chassis.
Item no.: 58544
Tamiya 1:10 TRF417 V5 Premium Package Chassis Kit EP #42240
Special features unique to the TRF417WX:
- Newly designed carbon fiber upper (2.0mm thick) and lower (2.25mm thick) decks feature refined shapes to provide optimum roll flexibility.
- Newly-designed one-piece aluminum servo mount is secured to the chassis by one side (inner side) only so as to not jeopardize chassis flexibility.
- Newly-designed aeration dampers help maximize traction.
- Front and rear carbon fiber damper stays (3.5mm thick) have redefined damper attachment positions.
- Front direct coupling is equipped with steel cup joints and coupled with Double-Cardan drive shafts to provide efficient, smooth power transfer.
- Rear gear differential features steel diff joints and swing shaft protectors.
Item no.: 42240
Tamiya 1:10 TT01E Mitsubishi Lancer Evo VII w/ESC EP #58542
Released in February 2001, the 7th-generation Mitsubishi Lancer Evolution featured a highly rigid body, a 280hp turbocharged 2-liter engine, and an electronically-controlled 4WD system with an active center differential. Its superb performance made it a popular choice for motorsports such as rally racing and gymkhana. In the USA, the car was introduced and immortalized to U.S. auto enthusiasts by the popular racing game known as Gran Tourismo. The Tamiya R/C version is modeled in 1/10 scale, features a polycarbonate hyper detailed body and it is mounted on the easy to assemble TT-01 Type-E 4wd chassis platform.
Item no.: 58542
Tamiya 1:10 Subaru BRZ Body Parts Set #51517
This is the spare body parts set of the Subaru BRZ. The body may be mounted on any Tamiya 190mm wide 4WD chassis platform.
Item no.: 51517
Tamiya 1:10 BMW M3 Sport Evo Jagermeister Body Parts Set #51514
This is the spare body parts set of the BMW M3 EVO. The body may be mounted on any Tamiya 190mm wide 4WD chassis platform.
Item no.: 51514
Tamiya Steel Bevel Gears For TA06 Gear Differential Unit #54428
Replace the kit-standard plastic gears (GV1 and GV2) with these metal gears to allow your car to handle tough driving conditions such as rally driving with a high-powered motor.
Item no.: 54428
Tamiya TA06 Lightweight Front-Middle Shaft #54434
Made from hard-coated aluminum, this lightweight, durable front middle shaft offers efficient power transfer and improved throttle response. It is compatible with a wide variety of pulleys to allow for creating drift settings on the TA-06 chassis.
Item no.: 54434
Tamiya TA06 Lightweight Main Shaft #54433
Made from durable aluminum, this lightweight main shaft offers efficient power transfer and improved throttle response on the TA-06 drivetrain. It also features hard coated surfaces for improved durability.
Item no.: 54433
Tamiya TA06 Carbon Reinforce N Parts (Rocker Arm) #54455
These carbon reinforced nylon N Parts (Rocker Arm) for the TA06 chassis platform offers increased front damper attachment rigidity for improved handling. The included reinforced pulley holder (N17) ensures a more efficient power transfer to the drive wheels.
Item no.: 54455
Tamiya Steering Assist Unit TGU-01 For F104, RM-01, M-06 #54417
This compact, lightweight unit is equipped with a gyro sensor system and when it detects the car beginning to slide, it quickly applies counter steering to prevent spins and maintain the car's stability. This is especially helpful when driving rear-wheel drive cars, such as the F104 and RM-01 chassis machines, or driving on slippery track surfaces. The counter steering range can be adjusted and sensitivity may also be adjusted by your transmitter when a 3-channel R/C system is used.
Note: Gyro systems are banned from use in organized competition in the United States from leading sanctioning organizations. It is also banned for use in the Tamiya Championship Series. The item is recommended for hobbyists who are not racing in such events.
Item no.:54417
| 
收藏
勁正
嬲嬲